1996 Ford F-250 Performance Air Intake Systems

Change Vehicle
1 - 60 of 612 results
show:
sort by:
    • (0 reviews)
      # 333539
      Ford F-250 with Mass Air Sensor 1996, 57 Series FIPK Generation I Air Intake System without Intake Pipe by K&N®. Air Filter Large End Diameter: 7.5" (191 mm). Air Filter Material: Cotton Gauze. Air Filter Material: Cotton Gauze....
      Guaranteed to increase horsepower and improve accelerationCustom designed and engineered for each application
      $165.99 - $169.99
    • (0 reviews)
      # 73904162
      Ford F-250 7.3L 1996, 57 Series FIPK Generation II High-Density Polyethylene Black Air Intake System with Intake Pipe by K&N®. Replacement Filter # RC-4780. Use with Pre-Filter # RC-4780DK. Air Filter Height: 9.5" (241 mm). Air...
      Guaranteed to increase horsepower and improve accelerationCustom designed and engineered for each application
      $272.99
    • (0 reviews)
      # 323779
      Ford F-250 4.9L / 5.0L / 5.8L / 7.5L without Mass Air Sensor 1996, 63 Series Aircharger Air Intake System by K&N®. Replacement Filter # RF-1012. Use with Pre-Filter # RF-1012DK. Air Filter Height: 9" (229 mm). Air Filter Material:...
      Guaranteed to increase horsepower and improve accelerationCustom designed and engineered for each application
      $192.99
    • (0 reviews)
      # 134341016
      Ford F-250 7.3L 1996, Diesel Elite Stage-2 Intake System by aFe®. Filter Series: Pro DRY S. Includes: Stage-2 Intake System with Pro DRY S Filter, aFe Diesel Snapback Hat, 12 oz. Cleaner Spray for Air Filter Cleaning. aFe is proud...
      Outflows factory intake by 48%CAD-Designed Roto-Molded Intake Tube
      $329.00
    • (0 reviews)
      # 103801385
      Ford F-250 7.3L 1996, Magnum Force Stage 2 Intake System by aFe®. HP Gain: +8 hp. TQ Gain: +17 lbs. x ft. Includes: Air Filter, 1-Piece Black Powdercoat Heat Shield, Heat Insulating Roto-Molded Tube. The aFe Stage 2 Cold Air Intake...
      Improves airflow to your engineIsolates the air filter from engine heat, enabling it to take in cooler, denser air
      $375.00 - $387.00
    • (0 reviews)
      # 69417480
      Ford F-250 Diesel 1996, Rapid Flow Cold Air Intake System by Bully Dog®. HP Gain 10, TQ Gain 15. Open. Powder Coated Steel. Replacement Filter # 224685. Use with Pre-Filter # 225101. The Rapid Flow Induction kit is designed with...
      Seals tightly to hood to pull air from cold areas in engine compartmentIncreases airflow to engine
      $369.99
    • (0 reviews)
      # 56289010
      Ford F-250 7.3L 1996, Cold Air Intake System by GREEN FILTER®. Improve power and increase the mileage your diesel engine delivers and save the cost of replacement filters to boot by installing a Cold Air Intake System from Green...
      Revised air box for improved flow, colder intake chargeCleanable, reusable filter element will outlast your car
      $247.50
    • (0 reviews)
      # 83230385
      Ford F-250 Diesel 1996, Cold Air Intake Kit with Cleanable Cotton Filter by S&B®. All intakes S&B produces is manufactured to the highest standards and submitted for CARB approval.
      High quality at an affordable priceExpertly made from premium materials
      $269.00
    • (0 reviews)
      # 141087969
      Ford F-250 Diesel 1996, Cold Air Intake Kit with Dry Disposable Filter by S&B®. All intakes S&B produces is manufactured to the highest standards and submitted for CARB approval.
      High quality at an affordable priceExpertly made from premium materials
      $269.00
    • (0 reviews)
      # 154509358
      Ford F-250 4.9L / 5.0L / 5.8L / 7.5L 1996, 33 Series Panel Air Filter by K&N®. Air Filter Color: Red. Filter Material: Cotton Gauze. Filter Re-Oiling Amount: 1.09 oz (32 ml). Height: 1.188" (30 mm). Outside Length: 12.813" (325...
      Improves engine airflowIncreases horsepower and acceleration
      $47.99
    • (0 reviews)
      # 124902740
      Ford F-250 7.3L 1996, E Series Oval Air Filter by K&N®. Air Filter Color: Red. Filter Material: Cotton Gauze. Filter Re-Oiling Amount: 5.15 oz (152 ml). Height: 6" (152 mm). Inside Length: 9.688" (246 mm). Inside Width: 3" (76 mm)....
      Designed to boost horsepower and rate of accelerationCan be cleaned and used again
      $71.99
    • (0 reviews)
      # 80297965
      Ford F-250 7.3L 1996, SynthaFlow® Oval Air Filter by AIRAID®. Filter Material: Cotton Gauze & Non-Woven Synthetic. Height: 9" (229 mm). Outside Diameter: 14" (356 mm). Quantity: Sold individually. Includes: 1 Air Filter. Advanced...
      Improves airflow and engine performanceProvides superior air filtration and engine protection
      $75.38
    • (0 reviews)
      # 80297867
      Ford F-250 4.9L / 5.0L / 5.8L / 7.5L 1996, SynthaFlow® Panel Air Filter by AIRAID®. Filter Material: Cotton Gauze & Non-Woven Synthetic. Quantity: Sold individually. Includes: 1 Air Filter. Advanced air filtration technology,...
      Improves airflow and engine performanceProvides superior air filtration and engine protection
      $58.04
    • (0 reviews)
      # 80297964
      Ford F-250 7.3L 1996, SynthaMax® Oval Air Filter by AIRAID®. Filter Material: Non-woven Synthetic. Height: 6" (152 mm). Inside Diameter: 14" (356 mm). Outside Diameter: 14" (356 mm). Quantity: Sold individually. Includes: 1 Air...
      Improves airflow and engine performanceProvides superior air filtration and engine protection
      $79.46
    • (0 reviews)
      # 918741
      Ford F-250 7.3L 1996, Magnum Flow Pro 5R Oval Straight Air Filter by aFe®. Constructed with 100% polyurethane on top and base, this high-flow, oiled OE replacement performance filter will outflow the stock paper filter by up to 17%...
      Improves airflow for better performance and accelerationPre-oiled, washable/reuseable air filter for long service life with life-time warranty
      $73.95
    • (0 reviews)
      # 918717
      Ford F-250 Gas 1996, Magnum Flow Pro 5R Panel Air Filter by aFe®. This Pro 5R air filter provides performance filtration and maximum convenience. Constructed with 100% polyurethane on all sides, this high flow cotton gauze OE...
      Deep Cotton Pleats for Increased FlowFits In Factory Housing
      $62.95
    • (0 reviews)
      # 921591
      Ford F-250 7.3L 1996, Magnum Flow Pro Dry S Oval Straight Air Filter by aFe®. Constructed with 100% polyurethane on all four sides, this "oil free" OE replacement filter will outflow the stock paper filter providing performance and...
      Improves airflow for better performance and accelerationOil-free for easy quick servicing and yet washable/reuseable air filter for long service life with life-time warranty
      $73.95
    • (0 reviews)
      # 921567
      Ford F-250 Gas 1996, Magnum Flow Pro Dry S Panel Air Filter by aFe®. Constructed with 100% polyurethane on all four sides, this high flow "oil-free" OE replacement performance filter will outflow stock paper filter for improved...
      For Improved Horsepower And TorqueLimited Lifetime Warranty
      $62.95
    • (0 reviews)
      # 927296
      Ford F-250 7.3L 1996, Magnum Flow Pro Guard 7 Oval Straight Air Filter by aFe®. Constructed with 100% polyurethane on all sides, this high-flow, oiled OE replacement performance filter will outflow the stock filter by up to 37% for...
      Improves airflow for better performance and accelerationPre-oiled, washable/ reusable air filter for long service life with life-time warranty
      $83.95
    • (1 review)
      # 56293542
      Ford F-250 1996, Factory Replacement Air Filter by GREEN FILTER®. Replace your factory air cleaner filter element with a Green Filter oiled-cotton filter and never buy another filter as long as you own your vehicle. Enjoy superior...
      Cleanable, reusable filter element will outlast your carTraps particles as small as 5 microns
      $43.69 - $68.82
    • (0 reviews)
      # 160545497
      Ford F-250 4.9L / 5.0L / 5.8L / 7.5L 1996, HPR™ Panel Air Filter by Spectre Performance®. Air Filter Color: Red. Filter Material: Non-woven Synthetic. Height: 1.12" (28 mm). Oil Amount: 25 ml (1 oz). Outside Length: 12.75" (324...
      High performance and high air flow filterFilter media is non-woven synthetic and pre-dyed
      $19.91
    • (1 review)
      # 85095936
      Ford F-250 5.0L 1996, Officially Licensed Ford Engine Dress-Up Kit by Proform®. Material: Steel. Sold as One Kit. If you are looking to enhance your vehicle's performance, then this top-notch product is definitely what you need....
      Officially Licensed Ford ProductsCarefully designed to improve the performance of your vehicle
      $187.36 - $286.48
    • (0 reviews)
      # 141086721
      Ford F-250 Gas 1996, Cotton Cleanable 8-ply Air Filter by S&B®. All S&B air filters maintain high air flow characteristics designed to increase horsepower and acceleration. Each filter S&B produces is manufactured to the highest...
      High quality at an affordable priceExpertly made from premium materials
      $35.24
    • (0 reviews)
      # 85633136
      Ford F-250 Diesel 1996, Dry Disposable Air Filter by S&B®. All S&B air filters maintain high air flow characteristics designed to increase horsepower and acceleration. Each filter S&B produces is manufactured to the highest...
      High quality at an affordable priceExpertly made from premium materials
      $56.45
    • (0 reviews)
      # 57177035
      Ford F-250 1996, Mass Air Flow Sensor by Spectra Premium®. Material: Aluminum. With Housing. Spectra Premium’s complete line of new Mass Air Flow Sensors, featuring Ceramic PC boards to ensure premium performance and durability.
      Provide more consistent voltage to eliminate engine rough idle problemsPlatinum connector threads reduce the number of connection points for faster reaction to change
      $79.18 - $87.23
    • (0 reviews)
      # 171822339
      Ford F-250 5.0L With Stock configuration Cylinder Head Style With Dual 4-barrel square bore Carburetor Mounting Ford small block Windsor 1996, Dual-Quad Intake Manifold by Edelbrock®. Their larger plenums and runners match the...
      The finest quality at a great priceWe carry everything needed to complete the job
      $369.95 - $631.23
    • (0 reviews)
      # 171826818
      Ford F-250 Ford small block Windsor 1996, Performer Intake Manifold by Edelbrock®. Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and patented runner design that you won't find in other...
      Fast shipping; 1-2 day delivery time regardless of where you’re locatedThe finest quality at a great price
      $273.81 - $790.53
    • (0 reviews)
      # 17624068
      Ford F-250 1996, Performer Intake Manifold by Edelbrock®. Idle-5500 RPM. With EGR. Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and patented runner design that you won't find in other...
      Fast shipping; 1-2 day delivery time regardless of where you’re locatedThe finest quality at a great price
      $379.56 - $790.53
    • (0 reviews)
      # 171826493
      Ford F-250 With Thunder Series AVS Carburetor Model Ford small block Windsor 1996, Performer RPM Manifold and Carburetor Kit by Edelbrock®. With a Manifold and Carb Kit, it's easy to upgrade your induction system with the best...
      The finest quality at a great priceWe carry everything needed to complete the job
      $823.38 - $1,640.58
    • (0 reviews)
      # 171824377
      Ford F-250 With 4-barrel square bore Carburetor Mounting Ford small block Windsor 1996, by Edelbrock®. Performer RPMs are dual-plane, high-rise intakes with 180° firing order to produce incredible top-end horsepower while...
      50-state emissions street legalThe finest quality at a great price
      $245.29 - $489.81
    • (0 reviews)
      # 171824442
      Ford F-250 5.8L With Stock configuration Cylinder Head Style With Dual 4-barrel square bore Carburetor Mounting Ford small block Windsor 1996, RPM Air-Gap Dual-Quad Intake Manifold by Edelbrock®. Their larger plenums and runners...
      The finest quality at a great priceWe carry everything needed to complete the job
      $381.73 - $519.40
    • (0 reviews)
      # 171824464
      Ford F-250 With 4-barrel square bore Carburetor Mounting Ford small block Windsor 1996, RPM Air-Gap Intake Manifold by Edelbrock®. Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and patented...
      Fast shipping; 1-2 day delivery time regardless of where you’re locatedThe finest quality at a great price
      $326.81 - $588.04
    • (0 reviews)
      # 171826879
      Ford F-250 With 4-barrel square bore Carburetor Mounting Ford small block Windsor 1996, Torker II Intake Manifold by Edelbrock®. Designed utilizing the latest technology, this product by Edelbrock features premium quality and will...
      Designed to unlock more performance out of your vehicleDeliver a reasonable balance of strength and durability
      $271.40 - $538.41
    • (0 reviews)
      # 97303601
      Ford F-250 With 1500-6500 RPM Range 1996, Intake Manifold by Professional Products®.
      Maximizes air flow and engine efficiencyAdds horsepower and performance
      $175.05 - $359.45
    • (0 reviews)
      # 120699948
      Ford F-250 5.0L 1996, Air RAM Series Intake Manifold by Weiand®. Designed for the 5.0L Ford and LS series families, this intake pick up where the factory left off. Engineered to build horsepower and torque through optimized plenum...
      Low Rise Dual Plane Design builds maximum torque for street performance enginesSquare Bore Carburetor Mounting Flange
      $165.95 - $219.95
    • (0 reviews)
      # 120652139
      Ford F-250 5.0L With Small Block Engine 1996, Hi-Ram Series Intake Manifold by Weiand®, Power Band to: 8000 RPM. Hi-RAM Series Intake Manifold used primarily in drag racing, tractor/truck pulls and performance marine applications...
      $374.95
    • (0 reviews)
      # 120652155
      Ford F-250 5.0L With Small Block Engine 1996, Stealth Series Intake Manifold by Weiand®, Finish: Satin. WEIAND’s top-of-the-line high-rise dual plane manifold combines the low-end throttle response of a 180° design with the...
      Port Size: 1.83” height 1.02" widthHeight: Front 4.35", Rear 5.59"
      $190.95
    • (0 reviews)
      # 64865964
      Ford F-250 5.0L 1996, X-CELerator Series Intake Manifold by Weiand®. 360°, single-plane, open plenum manifold designed primarily for high-performance street, drag, marine and oval track use. This series works best with a higher...
      Single PlaneSquare Carburetor Mounting Flange
      $243.95
    • (0 reviews)
      # 97260138
      Ford F-250 1996, Power-Plus Series™ Throttle Body by BBK®. Style: Twin Style. Increase airflow and add 15-20 horsepower at the rear wheels by bolting on this high-flow throttle body. It’s a direct replacement for your factory...
      Designed to increase airflow and improve horsepower15-20 dyno proven horsepower increase at the rear wheels depending on vehicle and application
      $349.99
    • (0 reviews)
      # 17632967
      Ford F-250 5.0L 1996, Pro-Flo™ XT Throttle Body by Edelbrock®. Length: 90mm. Standard 5.0 Mount Bolt Pattern. They are cast, fully machined, and assembled by Edelbrock using all new components including a pre-set TPS and an idle...
      Fast shipping; 1-2 day delivery time regardless of where you’re locatedThe finest quality at a great price
      $412.29 - $429.66
    • (0 reviews)
      # 91571347
      Ford F-250 5.0L With Small Block 1996, Dual Wing Design Chrome Air Cleaner Top by Trans-Dapt®. 1 Piece. Trans-Dapts' durable chrome finish looks better than stock, and the quality sealing ring means they work as well, or better...
      Expertly crafted from premium materialsDesigned to match rigorous quality standards
      $40.28
    • (0 reviews)
      # 102171269
      Ford F-250 5.0L / 5.8L 1996, Hex Head Intake Manifold Bolts by Mr. Gasket®. Includes Sems Type Captured Washers. Size: 5/16"-18 x 2".
      Returns your vehicle to its pristine stateExceptional quality at a great price
      $13.23
    • (0 reviews)
      # 97296677
      Ford F-250 5.0L / 5.8L 1996, Intake Manifold Bolt Set by Professional Products®. Material: Stainless Steel. 12 Point.
      Premium StainlessGrouped Together And Labeled For Size/Length
      $32.00
    • (0 reviews)
      # 97296718
      Ford F-250 5.0L / 5.8L 1996, Power+Plus™ Intake Manifold Gasket Set by Professional Products®. Replace your blown or leaky intake manifold gaskets with this direct-fit replacement set which is ideal for your restoration needs....
      Silicone Beading For Additional Sealing
      $16.33
    • (0 reviews)
      # 97296743
      Ford F-250 5.0L / 5.8L 1996, Typhoon™ Intake Manifold Spacer by Professional Products®. Thick: 0.5".
      Typhoon™ Phenolic SpacerIsolates Engine Heat From Manifolds
      $79.59
    • (0 reviews)
      # 89698387
      Ford F-250 5.0L 1996, Street Tunnel Ram Intake Gasket by RHS®. Size: 1.29"x 2.12". Designed utilizing the latest technology, this product by RHS features premium quality and will perform better than advertised. Perfect for your...
      Designed to unlock more performance out of your vehicleDeliver a reasonable balance of strength and durability
      $29.54
    • (0 reviews)
      # 64867106
      Ford F-250 7.5L 1996, Hi-Ram Series Intake Manifold Top by Weiand®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product...
      Made with precision and quality in mindBuilt to last
      $249.95
    • (0 reviews)
      # 91396860
      Ford F-250 1996, EFI Heat Spacer Kit by Trick Flow Specialties®. Comes in a kit. Includes Hardware, Gaskets. Spacer made from Phenolic. CNC-machined in the USA from premium phenolic material, Trick Flow® EFI heat spacers fit...
      $95.72 - $109.40
    • (0 reviews)
      # 91396863
      Ford F-250 1996, Intake Gasket by Trick Flow Specialties®. Comes in a set. Gasket made from Compressed fiber laminate. Trick Flow® teamed up with Fel-Pro to produce quality intake gaskets to complement its cylinder heads and...
      $31.68 - $33.38
    • (0 reviews)
      # 107796551
      Ford F-250 1996, Vacuum Pump Drive Kit by Moroso®. With this quality part backed by a great price, you can enjoy your vehicle so much more than you thought was possible. This Moroso part is specifically engineered to make your...
      $231.24 - $249.99
    • (0 reviews)
      # 13553203
      Ford F-250 1996, Powr-Flo™ Throttle Body Spacer by JET®. JET Performance Powr-Flo Throttle Body Spacers were designed using the latest aerospace technology along with JET's 35 plus years of engineering fuel systems for some of...
      Increased Mid-Range Horsepower And TorqueImproved Throttle Response/Increased Fuel Economy
      $96.74 - $122.99
    • (0 reviews)
      # 56806355
      Ford F-250 5.0L With Small Block Ford 1996, Chrome Throttle Return Spring Bracket by Trans-Dapt®. Chrome plated carburetor spring brackets provide an extremely convenient location to hook up your carburetor return spring. Designed...
      Expertly crafted from premium materialsDesigned to match rigorous quality standards
      $5.72
    • (0 reviews)
      # 91393636
      Ford F-250 5.0L 1996, Natural Throttle Cable Bracket by Trick Flow Specialties®. 1 Piece. Includes Hardware. Bracket made from Aluminum. These Trick Flow® throttle cable brackets provide a place to mount throttle cables on 1986-93...
      $71.28
    • (0 reviews)
      # 81471573
      Ford F-250 5.0L / 5.8L Small Block Windsor Engine 1996, 0.060" Aramid Fiber Intake Head Gasket by Cometic Gasket®. Compressed Thickness: 0.060". Port Style: N351 Sportsman. Cometic MLS Gaskets are comprised of multiple layers of...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $23.58
    • (0 reviews)
      # 17598797
      Ford F-250 5.0L Small Block 1996, Intake Gasket by Edelbrock®. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. Edelbrock's gaskets are not only manufactured from...
      Fast shipping; 1-2 day delivery time regardless of where you’re locatedThe finest quality at a great price
      $22.28 - $121.19
    • (0 reviews)
      # 171776349
      Ford F-250 5.8L Ford small block Windsor 1996, Intake Gasket by Edelbrock®. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. Edelbrock's gaskets are not only...
      Fast shipping; 1-2 day delivery time regardless of where you’re locatedThe finest quality at a great price
      $22.28
    • (0 reviews)
      # 17607484
      Ford F-250 5.0L / 5.8L 1996, Manifold Gasket Set by Edelbrock®. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. Edelbrock's gaskets are not only manufactured from...
      Fast shipping; 1-2 day delivery time regardless of where you’re locatedThe finest quality at a great price
      $14.73
    • (0 reviews)
      # 171826055
      Ford F-250 1996, Plated Intake Bolt Kit by Edelbrock®. The Signature Series triangular air cleaner is a new style with a shape reminiscent of the muscle car era. This hot looking chrome air cleaner has the classic Edelbrock...
      $28.66 - $33.09
    • (0 reviews)
      # 191394066
      Ford F-250 5.0L 1996, Stealthram Gasket by Holley®. Designed with precision and functionality in mind, this accessory ensures outstanding performance and easy use which makes it the perfect deal for your ultimate satisfaction.
      $19.18
    • (0 reviews)
      # 139905758
      Ford F-250 5.0L 1996, SysteMAX Intake Manifold Gasket by Holley®. Designed with precision and functionality in mind, this accessory ensures outstanding performance and easy use which makes it the perfect deal for your ultimate...
      $30.71




    Guides & Articles

    • Performance Air Intake Systems
      Can an Air Intake System also Increase My Fuel Economy?
      We all know that achieving better fuel economy while driving puts money back in your pocket and does the environment a favor. But for those who are actively interested in squeezing the most out of every drop of gas, getting more miles per gallon can actually become a sport - especially if a vehicle has a manual transmission that can be upshifted earlier and put into neutral during downhill grades or when coasting to a stop sign.
    • Performance Air Intake Systems
      The Real Cost of Your Car’s Cheap Factory Air Filter
      In today's world, saving money wherever possible has become essential. But it's important not to lose sight of the fact that, sometimes, a product that costs more up front will save you more money over time. In our business, we've seen far too many consumers judge products solely on the basis of their initial cost, completely neglecting any long-term economy and benefits. When it comes to automobiles, "performance" air filters are a perfect example of this.
    • Performance Air Intake Systems
      My Car is Brand New | Why Should I Change My Air Intake System?
      Aftermarket air intake systems have become one of the most popular engine modifications available for late model cars and trucks. An easy question to ask is why are these so popular? After all, didn't engineers who work for your vehicle manufacturer spend years developing the best engine components available? Since power and fuel economy are major selling points these days, it's hard to imagine car companies not doing everything they can to maximize horsepower, miles per gallon, or both.
    • Performance Air Intake Systems
      What are the Different Types of Air Intake Systems?
      There are many types of aftermarket air intake systems that range from simple and inexpensive to elaborate. In the scope of this article, we'll examine the different types of air intakes, what they do, and look at a few specific product examples of each. But in short, performance air intake setups increase airflow into your engine - boosting combustion and creating more horsepower and torque that you can actually feel. Their relatively low cost and easy installation (bolt-on in most cases) keeps them in popular demand by car enthusiasts that own everything from 1.5-liter turbo motors to big block V8 engines.
    • Replacement Air Intake Parts
      Why Does My Car Have a Plastic Intake Manifold?
      An intake manifold is an integrated assembly that sits atop the engine, consisting of a series of tubes which distribute fresh outside air to each and every cylinder. On V-shaped engine blocks, an intake manifold typically sits between the two cylinder banks while inline engines may feature a manifold to the side of the cylinder head. Intake manifolds serve as a mounting point for carburetors, throttle body assemblies, fuel injectors, thermostats, and more depending on vehicle manufacturer engineering preferences. Intake manifolds may also serve to route coolant through dedicated channels in order to remove heat from the engine. Because of their location and functionality, intake manifold assemblies are under constant stress from engine vacuum pressure as well as direct heat from coolant, cylinder combustion gasses, and the cylinder heads to which they are mounted.

    Popular Products

    1996 Ford F-250 Performance Air Intake Systems Reviews

    Average rating:  4.5  4.5 - 26 reviews
    5 of 5
    Fast Service
    Parts were as expected and delivery was fast.
    DPosted by David (Clio, MI) /
    Was this review helpful for you? Yes
    View More
    Related 1996 Ford F-250 Pages
    1996 Ford F-250 Models
    SECURE SHOPPING

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
    It is neither inferred nor implied that any item sold by CARiD.com, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.