Wilwood® - Proportioning Valve

1992 Subaru WRX
Wilwood® - Black E-coat Proportioning Valve Wilwood® - Black E-coat Proportioning Valve Wilwood® - Clear Anodize Proportioning Valve Wilwood® - Clear Anodize Proportioning Valve Wilwood® - Clear Anodize Proportioning Valve Wilwood® - Black E-coat Proportioning Valve Wilwood® - Company Overview Wilwood Authorized Dealer
Item Number: 15885964
0 (0 ratings)
Availability: In Stock
Usually ships within 48 to 72 hours

Proportioning Valve by Wilwood®. Proportioning valves are normally installed in the rear fluid line to prevent the rear wheels from locking before the front wheels, or to give a driver the ability to make fine adjustments in front to rear bias percentage on the track to compensate for tire wear, fuel load burn-off, or changing track conditions. It is generally not recommended to attempt to reduce front wheel braking capacity.

Lowest Prices
Price match guarantee
Easy Returns
Quick, Simple, Free
In-House Experts
We know our products
Guaranteed Fitment
Always the correct part
Product Options
Select Product Options
20% offMADE IN USA
Originally $70.21 - $124.88
$56.17 - $99.90
Add to Cart
Select Product Options
Wilwood® - Black E-coat Proportioning ValveWilwood® - Black E-coat Proportioning Valve Dimensions
260-11322

Combination

Black E-coat Proportioning Valve by Wilwood®. GM Style Fixed with Delay, 1/2-20 & 7/16-24 Inlet, 3/8-24 IF and 9/16-18 IF Outlet. Wilwood's GM style proportioning valve is a direct replacement for 1978 and newer GM style vehicles equipped with front disc/rear drum brakes. Line connections for the valve, if mounted in the OE location, will allow the original lines to connect directly to the valve. If mounted in a non-OE location, fluid lines may have to be modified. This also does allow usage in other non-GM vehicles. This proportioning valve offers: 63% pressure reduction (rear) after the fixed 350 PSI knee point, 30 PSI front circuit delay and circuit failure sender activation at 50 PSI.

In Stock - Usually ships within 48 to 72 hours

$99.90
Wilwood® - Clear Anodize Proportioning ValveWilwood® - Clear Anodize Proportioning Valve

Knob Type

Clear Anodize Proportioning Valve by Wilwood®. Valve features an adjustable knee point from 100 to 1000 PSI. The proportioning rate is 57% from the desired knee point onward. Adjuster knob with fine thread tuning provides precise adjustment. This adjustment lets you fine tune the front to rear braking balance by proportionally decreasing the rear brake line pressure. Valve weighs only 5.2 ounces and has two .25” side mounting holes spaced 1.00” apart.

In Stock - Usually ships within 48 to 72 hours

SIZE:
PLEASE SELECT
    $56.17
    Wilwood® - Clear Anodize Proportioning ValveWilwood® - Clear Anodize Proportioning Valve Dimensions
    260-8420

    Lever Type

    Clear Anodize Proportioning Valve by Wilwood®. Level Adjust, 1/8-27 NPT Inlet & Outlet, 3/8-24 IF Female Inlet & Outlet Fit. Adjustable proportioning valves are designed for tuning and balancing custom brake systems on performance, racing, and other types of special purpose vehicles.

    In Stock - Usually ships within 48 to 72 hours

    $83.26
    Wilwood® - Black E-coat Proportioning ValveWilwood® - Black E-coat Proportioning Valve Dimensions
    260-11179

    Knob Type Combo

    Black E-coat Proportioning Valve by Wilwood®. Knob Adjust, 3/8-24 IF Inlet & Outlet, Combo with switch. Simplifies mounting, fluid circuit plumbing, brake light wiring, and brake bias adjustments on modified, custom built, or competition vehicles equipped with brake system upgrades.

    In Stock - Usually ships within 48 to 72 hours

    $77.72
    Total: $0.00
    Add To Cart Cancel
    Product Details
    Wilwood - About

    To properly bleed the brake system, begin with the caliper farthest from the master cylinder. For fixed mount calipers with two bleed screws on top, bleed the outboard bleed screw first, then bleed the inboard screw. Repeat this procedure until all calipers have been bled, ending with the caliper closest to the master cylinder. Once the system has been bled, the pedal should maintain a consistent, firm feel. If the pedal returns to a spongy feel after it has rested from the bleeding process, this is an indication that air still exists in the system. If this occurs, repeat the bleeding process until all air has been purged and the pedal retains a firm feel.

    Do not attempt to operate the vehicle until the system has been fully tested under controlled conditions in a safe location. After the system has been bled, checked for leaks, and the proper pedal resistance and travel have been determined, make a series of low speed stops, then gradually progress to normal operating speeds.

    Adjustable proportioning valves are designed for tuning and balancing custom brake systems on performance, racing, and other types of special purpose vehicles. They are not designed as direct replacements for any OEM application.

    56.17 99.90
    Brand: Wilwood       Part Numbers:
    paypal credit Wilwood Brakes

    Wilwood Engineering designs and manufactures high-performance disc brake systems. Since founding in 1977, we have developed a substantial matrix of brake components and engineering techniques that allow us to quickly and reliably create brake systems for almost any application. Their core ability is the rapid development of custom engineered brake systems using a combination of off-the-shelf and custom components. In addition to designing and manufacturing brakes for all types of competitive motor sports, Wilwood also manufactures brake systems and components for agricultural equipment, industrial applications, utility vehicles, snowmobiles, quads, motorcycles and military vehicles.

    Product Reviews (0)
    Product Reviews (0)
    More Accessories