1990 Chevy Blazer Performance Exhaust Systems

Change Vehicle
1 - 60 of 836 results
show:
sort by:
    • (0 reviews)
      # 573003
      Chevy Blazer Scottsdale 5.7L 1990, Force II™ Aluminized Steel Single Cat-Back Exhaust System with Single Side Exit by Flowmaster®. Exhaust Pipe Material: Aluminized Steel. Exit Location: Single Side Exit. Exit Configuration:...
      Available sound levels: Mild Sound / Mild - Moderate Sound (depends on application and exhaust type)Increases Power
      $278.97
    • (0 reviews)
      # 64168249
      Chevy Blazer Gas 1990, Dual Competition™ Header-Back Exhaust System Kit by Hooker®. Exhaust Type: Header-Back. Main Piping Diameter: 2.25". Muffler Series: Dual Competition™. Full stainless steel exhaust system comes complete...
      This part is legal for use on Uncontrolled (Non-Emissions Controlled) Vehicles or Racing VehiclesEach system is supplied with a high-efficiency stamped crossover & high-flow TIG-welded 304 SS absorption mufflers
      $194.95
    • (0 reviews)
      # 64168250
      Chevy Blazer Gas 1990, Dual Competition™ Manifold-Back Exhaust System by Hooker®. Exhaust Type: Manifold-Back. Main Piping Diameter: 2.25". Muffler Series: Dual Competition™. Hooker Manifold Back exhaust system is constructed...
      Reducer Flex-TubesReduces Backpressure
      $228.95
    • (0 reviews)
      # 64819098
      Chevy Blazer Gas 1990, Afterburner™ Headers by Flowtech®. CARB Compliant: No. Primary Tubing Diameter: 1.625". Without A.I.R. Tubes. FLOWTECH Afterburner headers provide an optimal balance between horsepower output and maximum...
      Innovative design for small block Chevy equipped vehiclesIncreases both horsepower and torque Large 3" secondary collector
      $232.95 - $402.95
    • (0 reviews)
      # 203424074
      Chevy Blazer 5.7L 1990, Block Hugger Headers by Flowtech®. CARB Compliant: No. System Type: Block Hugger. Primary Tubing Diameter: 1.625". Collector Outlet Diameter: 2.5". Flowtech Headers are the perfect combination of quality and...
      Tight fit block hugger design for popular hot rod and street rodsHeavy duty 16-gauge tubing for increased strength and durability
      $164.95 - $324.95
    • (0 reviews)
      # 64819103
      Chevy Blazer Gas 1990, Long Tube Headers by Flowtech®. FLOWTECH headers are precision engineered and leak tested to get maximum performance and fuel economy from your engine. Each header is formed from specially selected .060 cold...
      Mandrel-formed Power Plenum collectors for low backpressureConstructed of .060 cold roll flash mild steel tubing
      $148.95 - $315.95
    • (0 reviews)
      # 64169932
      Chevy Blazer Gas without Angle Plug Heads 1990, Competition™ Long Tube Header by Hooker®. Series: Competition™. System Type: Long Tube Header. Primary Tubing Diameter: 1.625". Collector Outlet Diameter: 2.5". CARB Compliant:...
      Provides unique styling enhancementIncreased corrosion protection ensures long service life and maintained appearance of investment
      $199.95 - $539.95
    • (0 reviews)
      # 64169937
      Chevy Blazer Gas 1990, Super Competition™ Long Tube Header by Hooker®. Series: Super Competition™. System Type: Long Tube Header. Primary Tubing Diameter: 1.625". Collector Outlet Diameter: 2.5". CARB Compliant: No. Collector...
      Expertly crafted from premium materialsDesigned to match rigorous quality standards
      $496.95 - $754.95
    • (0 reviews)
      # 84200100
      Chevy Blazer With Chevy Small Block Engine 1990, 604 Crate Engine Dirt Late Model Mild Steel Header Kit by Dynatech®. These 604 Crate Engine Dirt Late Model Headers have been designed specifically for use with 604 Crate Engines....
      Delivers a huge boost in performance and an awesome soundRigorously dyno-tested to provide maximum horsepower and torque gains
      $379.99
    • (0 reviews)
      # 84200131
      Chevy Blazer With Chevy Small Block Engine 1990, 604 Crate Engine Stainless Steel Dirt Late Model Headers by Dynatech®. These Stainless Steel 604 Crate Engine Dirt Late Model Header Kits have been designed specifically for use with...
      Engineered for 604 Crate enginesGaskets and bolts included
      $924.99
    • (0 reviews)
      # 84200103
      Chevy Blazer 5.7L With Chevy Small Block Engine 1990, Dirt Late Model Headers by Dynatech®. These Long Tube Dirt Late Model Headers are designed for use with straight or angle plug heads and standard Chevy engines.
      Gaskets and bolts includedMachine surfaced flanges - no leaks
      $309.99 - $374.99
    • (0 reviews)
      # 84200128
      Chevy Blazer 5.7L With Chevy Small Block Engine 1990, Economy Crossover Headers by Dynatech®. These Economy Crossover Headers are designed for use with a variety of engines and applications. Designed for angle or straight plug heads.
      Non-equal length design gives flat torque curve for slick tracksValve covers can be removed with header installed
      $299.99 - $319.99
    • (0 reviews)
      # 84200110
      Chevy Blazer 5.7L With Angle or Straight Plug Heads With Chevy Small Block Engine 1990, IMCA Modified Mild Steel Headers by Dynatech®. 1 Pair. These Modified Headers have been designed for use with straight or angle plug heads and...
      Made of High Quality MaterialsGaskets and bolts included
      $269.99 - $329.99
    • (0 reviews)
      # 84197978
      Chevy Blazer 5.7L With Chevy Small Block Engine 1990, IMCA Southern Sport Mod Mild Steel Headers by Dynatech®. Tube Outlet Diameter: 1.63". Collector Diameter: 3.00". Collector Length: 7.75". Flange Style: Square Port. Flange...
      Engineered for 602 Crate enginesGaskets and bolts included
      $229.99
    • (0 reviews)
      # 84200116
      Chevy Blazer 5.7L With Chevy Small Block Engine 1990, Long Tube Pavement Late Model Headers by Dynatech®. 1 Pair. These Long Tube Pavement Late Model Headers are designed for use with Standard Chevy engines. The Long Tube design...
      35” Equal Length primaries for maximum Torque and HorsepowerValve covers are removable with headers installed
      $389.99 - $399.99
    • (0 reviews)
      # 84200121
      Chevy Blazer 5.7L With Chevy Small Block Engine 1990, Mid Length Modified Headers by Dynatech®. These Mid Length Modified Headers have been designed for use with straight or angle plug heads.
      Fits angle or straight plug heads.Gaskets and bolts included.
      $239.99 - $309.99
    • (0 reviews)
      # 84200134
      Chevy Blazer 5.7L With Chevy Small Block Engine 1990, Mild Steel Stock Clip Headers by Dynatech®. 1 Pair. These Small IMCA Southern Sport Mod Headers have been designed for use with angle or straight plug heads. IMCA Sport Mod...
      Fits standard Chevy engines with angle or straight plug headsGaskets and bolts included
      $249.99 - $309.99
    • (0 reviews)
      # 96828586
      Chevy Blazer 5.7L With Chevy Small Block Engine 1990, Pro Cruiser Block Hugger Headers by Dynatech®. 1 Pair. Includes a pair of reducers (2.50" to 2.25"). Tube Outlet Diameter: 1.63". Collector Diameter: 2.50". Flange Style: Oval...
      Improves Performance and Appearance100% stainless steel construction
      $299.99
    • (0 reviews)
      # 91561945
      Chevy Blazer RWD (Rear Wheel Drive) Automatic Transmission 1990, Clippster Mid-Length Headers by Patriot Exhaust®. Collector Diameter: 2.5". Header made from Steel. Clippster style headers are perfect for grafting modern uni-body...
      Mid length or "clippster" headers provide improved ground clearance for popular muscle cars and street rods.Durable 16 and 18 gauge tubing
      $264.33 - $339.64
    • (0 reviews)
      # 91560783
      Chevy Blazer 5.7L With Small Block Chevy Engine 1990, Raw Steel Bucket Sprint Car Style Headers, 1 5/8" Tubes, 3 1/2" Collector by Patriot Exhaust®.
      Roadster "Fad T" and '32 Hi-Boy headersChoose between the Classic or the high performance Sprint style for small and big block Chevy and small block Ford engines.
      $245.33
    • (0 reviews)
      # 91561937
      Chevy Blazer 5.7L With Small Block Chevy Engine 1990, Tight Tuck Street Rod Headers by Patriot Exhaust®. Tight Tuck headers are the solution to many problems associated with engine swaps in modern street rods. Tight Tucks fit in...
      Tight Tucks fit in the tightest of engine compartments and clear most stock motor mounts.Durable 16-gauge tubing
      $192.10 - $495.70
    • (0 reviews)
      # 87266420
      Chevy Blazer With Chevy Small Block Engine 1990, 180 Crossover Headers by Schoenfeld Headers®. Comes in a set. Includes: Bolts/Studs, Gaskets. Header made from Steel. This top-notch product by Schoenfeld Headers is made to give...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $253.45 - $360.70
    • (0 reviews)
      # 87266480
      Chevy Blazer With Chevy Small Block Engine 5.7L 1990, Chassis Headers by Schoenfeld Headers®. Comes in a kit. Includes: Bolts/Studs, Gaskets. Header made from Steel. This top-notch product by Schoenfeld Headers is made to give that...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $168.43 - $252.67
    • (0 reviews)
      # 87266425
      Chevy Blazer With Chevy Small Block Engine 1990, Conventional Crossover Headers by Schoenfeld Headers®. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This product is...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $263.20 - $671.84
    • (0 reviews)
      # 87266492
      Chevy Blazer With Chevy Small Block Engine 5.7L 1990, DIRT Modified Headers by Schoenfeld Headers®. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This product is...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $263.20 - $302.20
    • (0 reviews)
      # 87258388
      Chevy Blazer With Chevy Small Block Engine 5.7L 1990, Demolition Derby Headers by Schoenfeld Headers®. Primary Tubing Diameter: 1.625". This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $136.84
    • (0 reviews)
      # 87266499
      Chevy Blazer With Chevy Small Block Engine 5.7L 1990, Dirt Late Model Headers by Schoenfeld Headers®. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This product is...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $263.20 - $745.48
    • (0 reviews)
      # 87266415
      Chevy Blazer With Chevy Small Block Engine 1990, H Style Crossover Headers by Schoenfeld Headers®. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This product is...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $263.20 - $302.20
    • (0 reviews)
      # 87266441
      Chevy Blazer With Chevy Small Block Engine 1990, IMCA Modified Headers by Schoenfeld Headers®. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This product is designed...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $168.43 - $364.99
    • (0 reviews)
      # 87266564
      Chevy Blazer 5.7L 1990, Sprint Car Headers by Schoenfeld Headers®. 1 Pair. Header made from Steel. Painted. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This product...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $221.08 - $644.23
    • (0 reviews)
      # 87266587
      Chevy Blazer With Chevy Small Block Engine 5.7L 1990, Stock Clip Headers by Schoenfeld Headers®. Comes in a set. Fenderwell, Painted. Includes: Bolts/Studs, Gaskets. Header made from Steel. This top-notch product by Schoenfeld...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $200.02 - $263.20
    • (0 reviews)
      # 87266592
      Chevy Blazer With Chevy Small Block Engine 5.7L 1990, Street Stock Header by Schoenfeld Headers®. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This product is designed...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $221.08 - $644.23
    • (0 reviews)
      # 87266599
      Chevy Blazer With Chevy Small Block Engine 5.7L 1990, Tri-Y Modified Header by Schoenfeld Headers®. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This product is...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $644.23 - $699.46
    • (0 reviews)
      # 87266411
      Chevy Blazer With Chevy Big Block Engine 1990, Truck Pull Header by Schoenfeld Headers®. 1 Pair. Upsweep 4 x 4, Painted. Includes: Bolts/Studs, Gaskets. Header made from Steel. Collector Diameter: 4". Collector Length: 10". This...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $360.70 - $370.45
    • (0 reviews)
      # 87258383
      Chevy Blazer With Chevy Small Block Engine 5.7L 1990, Zoomie Headers by Schoenfeld Headers®. Standard Zoomie Grassburner. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates....
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $134.73
    • (0 reviews)
      # 69347105
      Chevy Blazer 6.2L With Small Block 1990, Block Hugger™ Header by BTP®. Heavy Duty 1-5/8" Steel Tubes w/ 3/8" Flanges. Includes Collector Reducers, Gasket & Bolts. Replaces all Center Dump stock Manifolds. Not for use with Angled...
      Engineered to make your exhaust system perform at its peakProvides a powerful and aggressive sound
      $136.80 - $248.40
    • (0 reviews)
      # 136720729
      Chevy Blazer Gas Without Air Injection 1990, Armor Coated Shorty Headers by PaceSetter®. CARB Compliant: Yes. Finish: Armor Coated. Header Material: Mild Steel. Collector Diameter: 2.5". Primary Tubing Diameter: 1.5". 1 pair. If...
      Machined flanges and 16-gauge primaries, just like race long tubesPollution control hook ups
      $351.81
    • (0 reviews)
      # 97026268
      Chevy Blazer 5.7L 1990, Elite Ultra-Duty Full Length Headers by Hedman Hedders®. System Type: Full Length. Collector Outlet Diameter: 3". Hedman's ELITE Hedders are the best you can buy. They have thicker flanges. stronger wall...
      Made of High Quality MaterialsIdeal for Heavy Duty Applications
      $446.32 - $712.32
    • (0 reviews)
      # 96402680
      Chevy Blazer 5.7L 1990, Standard Duty Full Length Headers by Hedman Hedders®. System Type: Full Length. After more than 50 years of manufacturing headers using mild steel materials, Hedman Hedders, announces the introduction of...
      Made of High Quality 304 SSBuilt to Last
      $174.05 - $1,125.08
    • (0 reviews)
      # 199201327
      Chevy Blazer 5.7L Gross Vehicle Weight Rating Under 9000 1990, Direct Fit Stainless Steel Federal Oval Catalytic Converter by Flowmaster®. Inlet Diameter: 3". Outlet Diameter: 3". Converter Configuration: Direct Fit. Catalytic...
      Exceed all federal emission standardsStainless Steel shells
      $158.89
    • (0 reviews)
      # 22200703
      Chevy Blazer 5.7L 1990, Direct Fit California Pre-OBDII Catalytic Converter by MagnaFlow®. Catalytic Series: Pre-OBDII. Catalytic Converter Substrate Material: Ceramic. Converter Body Material: Stainless Steel. CARB Compliant: Yes....
      Increases exhaust flow compared to original factory converterIncreased exhaust flow allows your engine to make more power
      $297.19
    • (0 reviews)
      # 22198164
      Chevy Blazer 5.7L 1990, Direct Fit Federal Standard Catalytic Converter by MagnaFlow®. Catalytic Series: Standard. Catalytic Converter Substrate Material: Ceramic. Converter Body Material: Stainless Steel. CARB Compliant: No....
      Converter body manufactured from heavy-duty stainless steelIncreases exhaust flow compared to original factory converter
      $179.52
    • (0 reviews)
      # 111864793
      Chevy Blazer 1990, Stainless Steel Crate Muffler by Borla®. Muffler Body Material: Stainless Steel. Muffler Body Length: 14". Muffler Body Height: 4.35". Muffler Body Width: 9.1". Muffler Body Shape: Oval. Give your ride the sound...
      Made of High Quality Stainless SteelAvailable in various sizes and sound levels
      $220.99 - $241.99
    • (0 reviews)
      # 142863939
      Chevy Blazer Gas 1990, 3-Bolt Reducer with O2 Sensor Fitting by Flowtech®. 3-Bolt. Flowtech understands that when you purchase a set of headers, a muffler, or even an entire exhaust system, you want to know that you’re getting...
      Expertly crafted from premium materialsDesigned to match rigorous quality standards
      $37.50
    • (0 reviews)
      # 94962211
      Chevy Blazer 5.7L With Small Block Chevy Engine 1990, Header Bolts by Milodon®, 12 Pieces. Fastener made from Steel. 3/8" x 1". Gold irridited, grade 8, heat-treated header bolts. Compact 3/8'' hex head bolt allows use of standard...
      Designed to boost your vehicle's performanceMade from high-quality materials
      $7.95
    • (0 reviews)
      # 84200125
      Chevy Blazer 5.7L With Chevy Small Block Engine / With LS-Based Engines 1990, MuscleMAXX Stainless Steel Header Reducer Cone Kit by Dynatech®. Sold as kit. Dynatech® reducer cone kits for MuscleMaxx headers. Reducers bolt to...
      Made of High Quality MaterialsBuilt to Last
      $139.99 - $148.49
    • (0 reviews)
      # 71684506
      Chevy Blazer 5.7L With Small Block Chevy Engine 1990, Lakester Weld-Up Kit by Patriot Exhaust®. Kit includes header flanges, collector flanges, block-off plates, four exhaust hookup flanges, pre-bent header tubes and two collector...
      Give your rod a nostalgic lookWeld-up header kits work great for people who want to build custom headers
      $214.04 - $220.13
    • (0 reviews)
      # 142863895
      Chevy Blazer Gas 1990, Aluminum Header Gasket Set by Flowtech®. Includes 1 Pair Head Flange Gaskets, 1 Pair Exhaust Collector Gaskets. This product is made of high-quality materials to serve you for years to come. Designed using...
      Engineered for a precise, easy fitManufactured of P73 Ferroglass non-asbestos facing material for long life
      $10.04
    • (0 reviews)
      # 142863933
      Chevy Blazer Gas 1990, Real-Seal™ Aluminum Header Gaskets by Flowtech®. Flowtech REAL-SEAL header and collector gaskets are a revolutionary break-through in exhaust sealing technology. Constructed of separate layers of “Dead...
      Multi-Layer “Dead Soft” aluminum conforms to create a leak-proof sealWill not burn or blow out
      $52.73
    • (0 reviews)
      # 64167688
      Chevy Blazer Gas 1990, Super Competition™ Header Gasket by Hooker®. Series: Super Competition™. Port Shape: Square. Thickness: 0.07". Same As Port. Hooker's precision-matched Super Competition header gaskets provide a sure fit...
      Precision fit for improved sealingSteel core provides superior adhesion
      $12.89
    • (1 review)
      # 73926058
      Chevy Blazer Gas 1990, Pressure Master™ Header Seal by Earl's Performance®. Pressure Master™ Seals, designed and manufactured for Earl’s by Parker Hannifin Corporation, were the first high performance seals developed to...
      Uses Aerospace TechnologyReusable/Adaptable
      $23.30 - $42.40
    • (0 reviews)
      # 84197985
      Chevy Blazer 5.7L With Chevy Small Block Engine 1990, Aluminum Adapter Plate Small Block Chevy to STAHL by Dynatech®. Sold as kit. These SBC to Stahl Aluminum Adapter Plate Kits allow you to use a larger tube size to maximize power.
      Delivers a huge boost in performance and an awesome soundRigorously dyno-tested to provide maximum horsepower and torque gains
      $159.99
    • (0 reviews)
      # 84197984
      Chevy Blazer 5.7L With Chevy Small Block Engine 1990, Fiber Header Gaskets by Dynatech®. Sold in pairs. Dynatech Fiber Race Gaskets are the premium gaskets demanded by many enthusiasts and racers alike. Specifically designed to fit...
      Made of High Quality MaterialsNo Leaks
      $15.99
    • (0 reviews)
      # 84197983
      Chevy Blazer 5.7L With Chevy Small Block Engine 1990, Standard Port Gasket Kit by Dynatech®. 1 Pair. Dynatech Fiber Race Gaskets are the premium gaskets demanded by many enthusiasts and racers alike. Specifically designed to fit a...
      Made of High Quality MaterialsSold in Pairs
      $15.99
    • (0 reviews)
      # 102175342
      Chevy Blazer 5.7L 1990, Exhaust Header Gasket by Mr. Gasket®. Ultra-Seal. Includes Header Exhaust, Collector Flange Gasket, Header and Collector Flange Bolts. Whatever exhaust system you install on your engine, whether it’s a set...
      Gaskets for every application, from mild to wildAluminum, copper or steel gaskets
      $30.57
    • (0 reviews)
      # 102175360
      Chevy Blazer 5.7L 1990, Exhaust Gasket Set by Mr. Gasket®. Whatever exhaust system you install on your engine, whether it’s a set of chromed headers or simply a set of cleaned up flat black rams horn manifolds, you’ll need...
      Gaskets for every application, from mild to wildAluminum, copper or steel gaskets
      $13.23 - $42.99
    • (0 reviews)
      # 102175329
      Chevy Blazer 5.7L 1990, Ultra-Seal™ Exhaust Gasket Set by Mr. Gasket®. Whatever exhaust system you install on your engine, whether it’s a set of chromed headers or simply a set of cleaned up flat black rams horn manifolds,...
      Gaskets for every application, from mild to wildAluminum, copper or steel gaskets
      $20.37 - $32.61
    • (0 reviews)
      # 12051488
      Chevy Blazer 5.7L 1990, Exhaust Header Gaskets by Spectre Performance®. Package Quantity: 2. Includes: 2 Gaskets. Rooted in racing, Spectre Performance designs and builds every product with the same goal in mind - the best...
      High-tech engine parts for the most power and best performanceThe finest exterior and interior parts for superior appearance and functionality
      $8.52 - $19.91
    • (0 reviews)
      # 89472297
      Chevy Blazer 5.7L 1990, Graph-Flex Header Flange Gaskets by Taylor Cable®. Exhaust wraps help to retain heat in your exhaust system, which increases Horsepower while reducing radiant heat damage, especially to spark plug wires in...
      Modified engines have hotter exhaustBetter materials help seal poorly-mating flanges better.
      $23.04
    • (0 reviews)
      # 89472319
      Chevy Blazer 5.7L 1990, Seal-4-Good Aluminum Header Flange Gasket by Taylor Cable®. Exhaust wraps help to retain heat in your exhaust system, which increases Horsepower while reducing radiant heat damage, especially to spark plug...
      Modified engines have hotter exhaustBetter materials help seal poorly-mating flanges better.
      $33.74




    Guides & Articles

    • Performance Exhaust Systems
      Here's A "Tip": Exhaust Tips Are An Easy Way To Dress Up Your Tailpipe
      Performance exhaust systems give you improvements in power output, sound levels, and appearance, all in one package. But let's face it: not everyone has the spare change to buy and bolt up one of these kits. So you soldier on with what you have. And that may be a tired-looking exhaust system that is still functional. You've spent all day washing and waxing the vehicle's paint and chrome to perfection, but no degree of elbow grease will make that tailpipe look better.
    • Performance Exhaust Systems
      Are Headers Worth The Performance Improvement?
      Engines have often been compared to air pumps, because the engine that’s most efficient in terms of economy and power is the one that can get air in and out of its cylinders the easiest. That’s why most performance modifications like conical air filters, cold air intake systems, headers, and cat-back exhaust systems are aimed at making the intake and exhaust systems less restrictive. These parts increase the flow of air into the engine and ease the flow of exhaust gas out of the engine. Among these components, headers may be the most difficult to install. In this article, we’ll discuss what headers do, their different types, and how much performance they can add to your car.
    • Performance Exhaust Systems
      Are X-pipes and H-pipes Better Than Straight Pipes on Dual Exhaust Systems?
      You may be wondering why so many aftermarket performance exhaust system manufacturers are offering dual exhaust systems connected by "H-pipe" or "X-pipe" sections. After all, aren't two separate pipes, or so-called "true duals", the best for performance? The answer is no, but to understand why we have to examine how a typical internal combustion engine works.
    • Performance Exhaust Systems
      Power, Sound, Looks | Can I Have It All With a Cat-Back Exhaust System?
      It's an age-old question that many have asked. Will an aftermarket exhaust be worth the expense? While they definitely can be, an important question to ask yourself is do you care more about the deeper sound they’re designed to produce, or the added performance gained from being less restrictive? As car enthusiasts, we’ve become accustomed to associating the sound of a car with its exhaust. After all, doesn’t everyone have a childhood memory or two of a car and the particular sound it made?
    • Bed Accessories
      Pickup Truck Cab And Bed Sizes Are Important When Selecting Accessories
      Americans love to have choices. Buying a dress shirt? Decide solid or stripe, short or long sleeve, cotton or poly blend, button or spread collar, regular fit, slim fit, or big & tall. How about a meal at your favorite steak house? Will it be porterhouse, T-bone, or sirloin? Cooked rare, medium-rare, or medium? With baked, mashed, or French fried potatoes? Thirsty for a fancy cup of coffee? Let's not even get started on options that let you end up with a "grande caramel macchiato with 1% low-fat milk, 2 Splendas, and an extra espresso shot".
    • Replacement Exhaust Parts
      Direct Fit vs. Universal Mufflers
      Regardless of whether you're shopping for a simple replacement muffler that delivers original equipment (OE) sound and performance or an upgraded muffler which provides a deeper growl with increased power through freer exhaust flow, you'll see choices between "direct fit" mufflers and "universal" mufflers. In this article, we'll help you understand the differences between these two styles so you can make a more informed purchase.

    Popular Products

    1990 Chevy Blazer Performance Exhaust Systems Reviews

    Average rating:  5  5 - 1 review
    5 of 5
    Solid well built!
    I used this muffler on my emergency home generator. The connection between the generator motor and muffler was made with a Walker Exhaust 40002 Flex Tubing-Steel and 1 5/8" clamp (at engine) and a 1 3/4" clamp (at muffler). The flex tubing needed to be expanded (using and exhaust expander) to go over the muffler inlet.
    EPosted by Edward (Stephenson, MI) /
    1991 Chevy Blazer
    Was this review helpful for you? Yes
    Related 1990 Chevy Blazer Pages
    1990 Chevy Blazer Models
    SECURE SHOPPING

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
    It is neither inferred nor implied that any item sold by CARiD.com, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.