1988 Honda CR-X Performance Exhaust Systems

1 - 60 of 20601 of 04
show:
sort by:
    • Skunk2® MegaPower™ Exhaust System
      (0 reviews)
      Honda CR-X DX / Si 1988, MegaPower™ Exhaust System by Skunk2®. 2.36" Diameter. Bolt-on system. No welding or fabrication necessary. This MegaPower cat-back exhaust system delivers maximum performance and ultimate sound at an...
      Designed for maximum performanceGenerates more horsepower by optimizing engine airflow
      $603.74$482.99
      # 38815677
    • DC Sports® 4-2-1 Exhaust Headers
      (0 reviews)
      Honda CR-X 1988, Ceramic Coated Stainless Steel 4-2-1 Exhaust Header by DC Sports®. DC Sports header systems deliver incredible low-to mid-range power gains, while improving ground clearance and reducing weight by eliminating the...
      $406.90from $325.52 - $355.47
      # 45401793
    • Flowmaster® 222 Series Stainless Steel Round Catalytic Converter
      (0 reviews)
      Honda CR-X Federal Emission 1988, 222 Series Stainless Steel Round Catalytic Converter by Flowmaster®, 2" Inlet / 2" Outlet. 12.75" Length. 5" Width. Includes Heat Shield, 4 Bolt Flanges. Without Air Tube. The new Flowmaster...
      $81.48$65.18
      # 868987
    • MagnaFlow® Direct Fit Pre-OBDII Catalytic Converter
      (0 reviews)
      Honda CR-X 1988, Direct Fit Pre-OBDII Catalytic Converter by MagnaFlow®. If your car needs replacement, install one that will get you through the smog check and give you more horsepower. This converter will directly replace the...
      Increases exhaust flow compared to original factory converterIncreased exhaust flow allows your engine to make more power
      $170.84from $136.67 - $265.23
      # 22207289
    • Eastern® Direct Fit Catalytic Converter
      (0 reviews)
      Honda CR-X 1988, Direct Fit Catalytic Converter by Eastern Catalytic®. If you need to replace your failed or damaged catalytic converter, this product is the right choice. Designed specifically for your vehicle, this catalytic...
      Direct OEM replacementConverts harmful engine emissions to less dangerous gases and water vapor
      $141.26$113.01
      # 17573343
    • Flowmaster® 40 Series Delta Flow™ Muffler
      (0 reviews)
      Honda CR-X 1988, 40 Series Delta Flow™ Aluminized Steel Muffler by Flowmaster®, AGGRESSIVE SOUND, 2" Offset Inlet / 2" Offset Outlet, 4" Thick x 9.75" Wide x 13" Case Length x 19" Overall Length. The 2-chamber design of this...
      The Quietest Option in the 40 Series Two Chamber LineLess Resonance than other 40 Series Mufflers
      $118.05$94.44
      # 850756
    • Skunk2® MegaPower™ Muffler
      (0 reviews)
      Honda CR-X 1988, MegaPower™ Muffler by Skunk2®. 5.25" Canister. 2.25" Inlet Diameter. Skunk2 muffler is designed to maximize exhaust flow and power. Each muffler by Skunk2 is constructed from T-304 stainless steel and TIG welded...
      Increases performance by maximizing power and flowConstructed from T-304 stainless steel
      $197.49$157.99
      # 38815685
    • Bosal® Rear Muffler
      (0 reviews)
      Honda CR-X 1.6L 1988, Rear Muffler by Bosal®. This muffler is constructed by one of the leading OE suppliers to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on...
      Designed to deliver ultimate performance and a quality OE-style soundAluminized steel construction for maximum durability
      $112.35$89.88
      # 20566286
    • Bosal® Exhaust Flange Gasket
      (0 reviews)
      Honda CR-X 1988, Exhaust Flange Gasket by Bosal®. Bosal has a vast selection of all necessary accessories and hardware to help you make the exhaust system installation or repair job quick and easy. Choose Bosal, and you'll get...
      Constructed for a hassle-free exhaust repairEnsures a precise fit
      $4.45from $3.56 - $9.34
      # 20566288
    • Bosal® Rubber Mounting
      (0 reviews)
      Honda CR-X 1988, Rubber Mounting by Bosal®. Bosal has a vast selection of all necessary accessories and hardware to help you make the exhaust system installation or repair job quick and easy. Choose Bosal, and you'll get OE-quality...
      Constructed for a hassle-free exhaust repairEnsures a precise fit
      $3.03from $2.42 - $4.50
      # 20566328
    • Spec-D® N1 Style Cat-Back Exhaust System with Burnt Tip (2.5" Inlet)
      (0 reviews)
      Honda CR-X DX / Si 1988, N1 Style Cat-Back Exhaust System with Burnt Tip (2.5" Inlet) by Spec-D®. Make whatever you drive run and sound like a high-performance machine with a Spec-D Exhaust System. The Spec-D system replaces your...
      Dramatically improved exhaust flow compared to restrictive stock systemImproved engine breathing enables increased power output for better performance
      $200.25$160.20
      # 12205985
    • Spec-D® Exhaust Header
      (0 reviews)
      Honda CR-X Standard Transmission D15 Engine / D16 Engine 1988, Exhaust Header by Spec-D®. Make whatever you drive run and sound like a high-performance machine with a Spec-D Exhaust System. The Spec-D system replaces your...
      Dramatically improved exhaust flow compared to restrictive stock systemImproved engine breathing enables increased power output for better performance
      $100.13$80.10
      # 26510186
    • Spec-D® Single Cam 4-1 Header
      (0 reviews)
      Honda CR-X D15 Engine / D16 Engine 1988, Single Cam 4-1 Header by Spec-D®. Make whatever you drive run and sound like a high-performance machine with a Spec-D Exhaust System. The Spec-D system replaces your restrictive factory...
      Dramatically improved exhaust flow compared to restrictive stock systemImproved engine breathing enables increased power output for better performance
      $300.38$240.30
      # 26510187
    • Spec-D® Header Gasket with Donut
      (0 reviews)
      Honda CR-X Standard Transmission D15 Engine / D16 Engine 1988, Header Gasket with Donut by Spec-D®. Spec-D figuratively has their finger on the pulse of the accessories aftermarket, so they can bring you the latest style and best...
      Custom style lighting parts for a unique appearance and better visibilityHigh-tech engine parts for the most power and best performance
      $13.35$10.68
      # 26510189
    • Walker® Direct Fit Catalytic Converter
      (0 reviews)
      Honda CR-X 1988, Direct Fit Catalytic Converter by Walker®. This catalytic converter is constructed specially for your vehicle to directly replace the original equipment part and comes ready to install. The part is designed to meet...
      Designed to meet your vehicle’s specific emissions requirementsDirect fit replacement
      $146.33from $117.06 - $167.13
      # 17740014
    • Walker® Universal Fit Catalytic Converter
      (0 reviews)
      Honda CR-X 1988, Universal Catalytic Converter by Walker®. This part features the correct load of precious metals to ensure the proper limitation of tailpipe emissions. It is designed to meet the EPA policy and emission reduction...
      Constructed to meet your vehicle’s specific emissions requirementsFeatures stainless steel body with aluminized steel pipe and heat shields
      $81.83from $65.46 - $119.22
      # 17729904
    • Bosal® Catalytic Converter
      (0 reviews)
      Honda CR-X DX / Si 1988, Catalytic Converter by Bosal®. If you’re in need of a replacement catalytic converter, you can’t do better than Bosal. They’re a leading supplier to vehicle manufacturers and use advanced...
      Constructed to meet your vehicle’s specific emissions requirementsRadial flow concept allows for an even distribution of the gas flow in the converter for the optimal conversion of harmful gases
      $131.15$104.92
      # 20552026
    • Eastern® Universal Fit Catalytic Converter
      (0 reviews)
      Honda CR-X 1988, Universal Fit Catalytic Converter by Eastern Catalytic®. Whether your catalytic converter is damaged by road debris or failed due to an engine problem, you definitely need a new one, and this product is the way to...
      Universal fitConverts harmful engine emissions to less dangerous gases and water vapor
      $43.01from $34.41 - $176.63
      # 54552047
    • DEC® Catalytic Converter
      (0 reviews)
      Honda CR-X HF 1988, Catalytic Converter by DEC®. Not legal for sale or use in California and New York. Note: (48-State and Canada) EPA Tier 0 and Tier 1 emission use. Is your car noisier these days? Can you smell exhaust fumes in...
      $358.03$286.42
      # 7650106
    • Walker® Quiet-Flow™ SS Muffler Assembly
      (0 reviews)
      Honda CR-X 1988, Quiet-Flow™ SS Muffler Assembly by Walker®. Body Material - Stainless Steel, Color / Finish - Aluminized, Dimensions - 19" L x 9.75" W x 4.25" H, Oval Shape, Inlet Diameter - 1.75" OD, Outlet Diameter - 1.5" OD,...
      Designed for OE equivalent sound and precision fitSpun-locked heads for a proper resistance to backfire
      $137.01$109.61
      # 18163387
    • Walker® Resonator
      (0 reviews)
      Honda CR-X 1988, Resonator by Walker®. If you want exhaust piping that delivers precise OE-style fit, appearance, and reliability, this part is your number one choice. Every pipe is vehicle-specific and is manufactured using...
      Designed to directly replace the factory partMade with precision benders and fixture checked
      $96.05from $76.84 - $84.49
      # 18165008
    • Walker® SoundFX™ Direct Fit Muffler
      (0 reviews)
      Honda CR-X 1988, SoundFX Direct Fit Muffler by Walker®. This muffler is the right choice if you opt for quality acoustics and performance. Walker offers 100% aluminized steel SoundFX Mufflers with direct fit and universal fit...
      Designed to deliver ultimate performance and pleasing sound qualityOE-equivalent direct-fit design
      $41.56from $33.25 - $41.03
      # 18169541
    • Walker® Extension Pipe
      (0 reviews)
      Honda CR-X 1988, Extension Pipe by Walker®. If you want exhaust piping that delivers precise OE-style fit, appearance, and reliability, this part is your number one choice. Every pipe is vehicle-specific and is manufactured using...
      Designed to directly replace the factory partMade with precision benders and fixture checked
      $24.94from $19.95 - $19.96
      # 18131373
    • Walker® Front Pipe
      (0 reviews)
      Honda CR-X 1988, Front Pipe by Walker®. Finish - Aluminized, 2" Pipe Diameter, 21" Overall Length, Bend Radius - 90, 1 Inlets, Inlet Connection Type - 3 Bolt Welded Flange, 1 Outlets, Outlet Connection Type - 2 Bolt Welded Flange,...
      Designed to directly replace the factory partMade with precision benders and fixture checked
      $115.80$92.64
      # 18135021
    • Walker® Intermediate Pipe
      (0 reviews)
      Honda CR-X HF 1988, Intermediate Pipe by Walker®. Finish - Aluminized, 1.75" Pipe Diameter, 21" Overall Length, Bend Radius - 90, 1 Inlets, Inlet Connection Type - 3 Bolt Welded Flange, 1 Outlets, Outlet Connection Type - 2 Bolt...
      Designed to directly replace the factory partMade with precision benders and fixture checked
      $98.73$78.98
      # 18158023
    • Walker® Tail Pipe
      (0 reviews)
      Honda CR-X DX / HF 1988, Tail Pipe by Walker®. Finish - Aluminized, 1.5" Pipe Diameter, 19" Overall Length, 1 Inlets, 1.5" Outside Inlet Diameter, Inlet Connection Type - Pipe Connection, 1 Outlets, 1.5" Outside Outlet Diameter,...
      Designed to directly replace the factory partMade with precision benders and fixture checked
      $11.71$9.37
      # 18180108
    • Walker® Spout
      (0 reviews)
      Honda CR-X DX / HF 1988, Spout by Walker®. Material - Steel, Finish - Chrome, 6" Overall Length, 1 Inlets, 1.62" Outside Inlet Diameter, Inlet Connection Type - Pipe Connection, 1 Outlets, 1.25" Inside Outlet Diameter, Outlet...
      Designed to directly replace the factory partMade with precision benders and fixture checked
      $14.08$11.26
      # 18174836
    • Bosal® Front Exhaust Pipe
      (0 reviews)
      Honda CR-X 1.5L To ED8 1988, Front Exhaust Pipe by Bosal®. This pipe is engineered to meet OE specs to ensure precise, factory-like fit, performance, and reliability. This part features a direct fit design allowing for ease of...
      Stainless or aluminized steel construction for durabilityPrecision-manufactured for easy fitment
      $35.75$28.60
      # 20553067
    • Dorman® Exhaust Manifold
      (0 reviews)
      Honda CR-X DX / Si 1988, Exhaust Manifold by Dorman®. Square Port. Material: Cast Iron. Bolt Hole Quantity: 6. With Installation Hardware. Includes: Exhaust Manifold, 1 Manifold Gasket and 1 Flange, 3 Studs, 3 Nuts. This is an...
      Includes heat-shield for protection of hoses, wiring, and other engine componentsCast iron or stainless tubular construction protects against warping and/or cracking
      $117.16$93.73
      # 16499545
    • Bosal® Exhaust Installation Kit
      (0 reviews)
      Honda CR-X 1988, Exhaust Installation Kit by Bosal®. Bosal has a vast selection of all necessary accessories and hardware to help you make the exhaust system installation or repair job quick and easy. Choose Bosal, and you'll get...
      Constructed for a hassle-free exhaust repairEnsures a precise fit
      $11.06from $8.85 - $10.91
      # 20566309
    • Bosal® Manifold Bolt
      (0 reviews)
      Honda CR-X 1988, Manifold Bolt by Bosal®. Bosal has a vast selection of all necessary accessories and hardware to help you make the exhaust system installation or repair job quick and easy. Choose Bosal, and you'll get OE-quality...
      Constructed for a hassle-free exhaust repairEnsures a precise fit
      $9.16$7.33
      # 20566320
    • Bosal® Manifold Nut
      (0 reviews)
      Honda CR-X 1988, Manifold Nut by Bosal®. Bosal has a vast selection of all necessary accessories and hardware to help you make the exhaust system installation or repair job quick and easy. Choose Bosal, and you'll get OE-quality...
      Constructed for a hassle-free exhaust repairEnsures a precise fit
      $0.43$0.34
      # 20566317
    • Bosal® Manifold Spring
      (0 reviews)
      Honda CR-X 1988, Manifold Spring by Bosal®. Bosal has a vast selection of all necessary accessories and hardware to help you make the exhaust system installation or repair job quick and easy. Choose Bosal, and you'll get OE-quality...
      Constructed for a hassle-free exhaust repairEnsures a precise fit
      $5.15$4.12
      # 20566314
    • Fel-Pro® Exhaust Manifold Gasket Set
      (0 reviews)
      Honda CR-X 1988, Exhaust Manifold Gasket Set by Fel-Pro®. If you need durable gaskets to prevent leaks on your vehicle, Fel-Pro is the way to go. Engineered using the latest technologies and global engineering resources, the...
      Direct OEM replacement for a proper fitEnsure reliable sealing performance
      $20.61$16.49
      # 19063644
    • AJUSA® Exhaust Manifold Gasket
      (0 reviews)
      Honda CR-X 1988, Exhaust Manifold Gasket by AJUSA®. These gaskets seal components in the intake and exhaust systems of the vehicle such as the intake manifold, intake plenum, and exhaust manifold to the engine or other components....
      Direct OEM replacement for a proper fitEnsure reliable sealing performance
      $23.40$18.72
      # 23005475
    • Victor Reinz® Exhaust Manifold Gasket
      (0 reviews)
      Honda CR-X 1988, Exhaust Manifold Gasket by Victor Reinz®, Use 1 per Car. OEM Standard. Material: Beaded Steel. When you’re low on oil, coolant or some other fluid, you may be tempted to just run down to the local auto parts...
      $21.80$17.44
      # 24041405
    • Walker® Spring Bolt Kit
      (0 reviews)
      Honda CR-X DX / HF 1988, Spring Bolt Kit by Walker®. 1 Inlet, 1 Outlet. With their extensive selection of accessories and hardware for the exhaust system, Walker will provide you with everything needed to do the complete exhaust...
      Makes installation quick and easyOptimal OE-style fit and quality
      $11.79$9.43
      # 18175556
    • Beck Arnley® Rear Catalytic Converter Gasket
      (0 reviews)
      Honda CR-X DX / Si 1988, Rear Catalytic Converter Gasket by Beck Arnley®. For one hundred years, Beck/Arnley has been providing premium OE quality parts for vehicles. Beginning with motorcycle parts in 1914 and transitioning to...
      OE quality products from top original equipmentTop quality materials
      $8.90$7.12
      # 36211937
    • Payen® Catalytic Converter Gasket
      (0 reviews)
      Honda CR-X HF 1988, Catalytic Converter Gasket by Payen®. Position: Inlet. Is your car noisier these days? Can you smell exhaust fumes in the cabin? Exhaust system repairs should not be put off, both for safety and legal reasons,...
      $34.66$27.73
      # 7769899
    • Dorman® Exhaust Bolt and Spring
      (0 reviews)
      Honda CR-X 1988, Converter Gold Metal Exhaust Bolt and Spring by Dorman®, 1 Piece. Use 2 per Car. Package Type: Card. M8 x 1.25. Dimensions: 59mm L x 17.15mm ID. This is an aftermarket part that replaces factory OE # 18230SA0930,...
      Rust and corrosion resistantDurable hardened and spring steel construction
      $8.08$6.46
      # 31531955
    • Dorman® Exhaust Flange Stud and Nut
      (0 reviews)
      Honda CR-X 1988, Exhaust Flange Stud and Nut by Dorman®, 1 Piece. Front. This is an aftermarket part that replaces factory OE # 140642J200, 14064AW000, 18107P3FA00, 18176PM3300, 90065657330, 90065689310, 90065PC0000, 90065PC1300,...
      Direct replacement for a proper fit every timeDurable steel construction
      $6.13$4.90
      # 31657820
    • Walker® Clamp
      (0 reviews)
      Honda CR-X 1988, Clamp by Walker®. With their extensive selection of accessories and hardware for the exhaust system, Walker will provide you with everything needed to do the complete exhaust job. When you choose Walker...
      Makes installation quick and easyOptimal OE-style fit and quality
      $1.75from $1.40 - $1.76
      # 18126055
    • Walker® Gasket
      (0 reviews)
      Honda CR-X 1988, Gasket by Walker®. With their extensive selection of accessories and hardware for the exhaust system, Walker will provide you with everything needed to do the complete exhaust job. When you choose Walker...
      Makes installation quick and easyOptimal OE-style fit and quality
      $3.98from $3.18 - $9.76
      # 18139357
    • Walker® Insulator
      (0 reviews)
      Honda CR-X DX / HF 1988, Insulator by Walker®. 2.875" Exhaust Hanger Overall Length, 1 Inlet, 1 Outlet. With their extensive selection of accessories and hardware for the exhaust system, Walker will provide you with everything...
      Makes installation quick and easyOptimal OE-style fit and quality
      $4.20$3.36
      # 18150234
    • Fel-Pro® Exhaust Pipe Flange Gasket
      (0 reviews)
      Honda CR-X 1988, Exhaust Pipe Flange Gasket by Fel-Pro®. If you need durable gaskets to prevent leaks on your vehicle, Fel-Pro is the way to go. Engineered using the latest technologies and global engineering resources, the gaskets...
      Direct OEM replacement for a proper fitEnsure reliable sealing performance
      $5.75from $4.60 - $15.06
      # 19068488
    • Beck Arnley® Exhaust Manifold Gasket
      (0 reviews)
      Honda CR-X 1988, Exhaust Manifold Gasket by Beck Arnley®. For one hundred years, Beck/Arnley has been providing premium OE quality parts for vehicles. Beginning with motorcycle parts in 1914 and transitioning to import vehicles in...
      OE quality products from top original equipmentTop quality materials
      $19.84$15.87
      # 35805906
    • Beck Arnley® Exhaust Pipe to Manifold Gasket
      (0 reviews)
      Honda CR-X DX / Si 1988, Exhaust Pipe to Manifold Gasket by Beck Arnley®. For one hundred years, Beck/Arnley has been providing premium OE quality parts for vehicles. Beginning with motorcycle parts in 1914 and transitioning to...
      OE quality products from top original equipmentTop quality materials
      $6.53$5.22
      # 36211941
    • Victor Reinz® Exhaust Seal Ring
      (0 reviews)
      Honda CR-X 1988, Exhaust Seal Ring by Victor Reinz®, Use 1 per Car. Ring Type 'A'. OEM Standard. Material: Steel And Composition. Type 'A'. When you’re low on oil, coolant or some other fluid, you may be tempted to just run down...
      $5.90from $4.72 - $5.38
      # 24149535
    • Ishino® Cat Converter Gasket
      (0 reviews)
      Honda CR-X DX / Si 1988, Cat. Converter Gasket by Ishino®. Note: Catalyst Outlet. Is your car noisier these days? Can you smell exhaust fumes in the cabin? Exhaust system repairs should not be put off, both for safety and legal...
      $5.06$4.05
      # 8284961
    • Ishino® Exhaust Gasket
      (0 reviews)
      Honda CR-X 1988, Exhaust Gasket by Ishino®. Is your car noisier these days? Can you smell exhaust fumes in the cabin? Exhaust system repairs should not be put off, both for safety and legal reasons, but before you waste your time...
      $4.13from $3.30 - $15.81
      # 8301043
    • Flowmaster® 10 Series Delta Force Single Chamber Race Muffler
      (0 reviews)
      Universal 10 Series Delta Force Single Chamber Race Muffler by Flowmaster®, AGGRESSIVE SOUND. The 10 Series Race mufflers are a compact lightweight single chamber design that will give a noticeable sound reduction compared to open...
      Race Proven TechnologyNoticeable Sound Reduction Compared to Open Headers
      $94.53from $75.62 - $146.90
      # 898490
    • Flowmaster® 30 Series Delta Force™ 3-Chamber Race Muffler
      (0 reviews)
      Universal 30 Series Delta Force™ 3-Chamber Race Muffler by Flowmaster®, AGGRESSIVE SOUND. These are the most powerful and the quietest professional race mufflers available. 5.00” & 6.00” thick case sizes for maximum power and...
      Race Proven TechnologyDelta Force Technology for Maximum Torque and Power
      $160.31from $128.25 - $267.60
      # 898450
    • Flowmaster® 40 Series Delta Force™ 2-Chamber Race Muffler
      (0 reviews)
      Universal 40 Series Delta Force™ 2-Chamber Race Muffler by Flowmaster®, AGGRESSIVE SOUND. The 40-Series mufflers offer a combination of maximum power and substantial dB-reduction compared to open headers. They are recommended for...
      Race Proven TechnologyDelta Force Technology for Maximum Torque and Power
      $132.48from $105.98 - $230.86
      # 898479
    • Flowmaster® 60 Series Delta Force Stainless Steel Race Muffler
      (0 reviews)
      Universal 60 Series Delta Force Stainless Steel Race Muffler by Flowmaster®, MODERATE SOUND, 4" Offset Inlet / 4" Offset Outlet, 22" Length. These are the most powerful and the quietest professional race mufflers available.
      Race Proven TechnologyNoticeable Sound Reduction Compared to Open Headers
      $246.58$197.26
      # 3146020
    • Flowmaster® Outlaw™ Race Muffler
      (1 reviews)
      Universal Outlaw™ Race Muffler by Flowmaster®, AGGRESSIVE SOUND. These mufflers are very small and lightweight. Attached directly to the collector they generally produce more power than open headers, while taking “the edge”...
      Race Proven TechnologyPure Race Muffler
      $111.25from $89.00 - $134.32
      # 898456
    • Flowmaster® Pro Series™ Stainless Steel Race Muffler with Turn Down
      (1 reviews)
      Universal Pro Series™ Stainless Steel Race Muffler with Turn Down by Flowmaster®, MODERATE SOUND, 6" Diameter x 16" Case Length. Laminar Flow Mufflers have applications in all forms of racing. The Cool Shell Technology makes...
      Race Proven Patented Laminar Flow TechnologyProven to Reduce dB Levels with no Reduction of Engine Performance Level
      $236.09$188.87
      # 898465
    • Flowmaster® Scavenger Series Outlaw II Race Collector Muffler
      (0 reviews)
      Universal Scavenger Series Outlaw II Race Collector Muffler by Flowmaster®. These Delta Force Mufflers are designed to attach directly to the exhaust header primary tubes, replacing the collector in sprint and drag racing...
      Race Proven TechnologyAttach to Exhaust Header Primary Tubes
      $234.83from $187.86 - $208.84
      # 23297627
    • Flowmaster® Scavenger Series Race Collector Muffler
      (0 reviews)
      Universal Scavenger Series Race Collector Muffler by Flowmaster®. These Delta Force Mufflers are designed to attach directly to the exhaust header primary tubes, replacing the collector in sprint and drag racing applications. They...
      Race Proven TechnologyAttach to Exhaust Header Primary Tubes
      $209.43$167.54
      # 898468
    • Flowmaster® 40 Series Delta Flow™ Muffler
      (1 reviews)
      Universal 40 Series Delta Flow™ Muffler by Flowmaster®, AGGRESSIVE SOUND, 4" Thick x 9.75" Wide x 13" Case Length x 19" Overall Length. The 2-chamber design of this muffler, incorporating the patented Flowmaster Delta Flow...
      The Quietest Option in the 40 Series Two Chamber LineLess Resonance than other 40 Series Mufflers
      $108.85from $87.08 - $108.08
      # 897054
    • Flowmaster® 40 Series Original Muffler
      (0 reviews)
      Universal 40 Series Original Muffler by Flowmaster®, AGGRESSIVE SOUND, 4" Thick x 9.75" Wide x 13" Case Length x 19" Overall Length. This is the muffler that launched the success of Flowmaster. It is an aggressive sounding...
      The Original High Performance Flowmaster MufflerrAggressive Sound for the Enthusiasts Who Love Their Exhaust to be LOUD
      $108.85$87.08
      # 897079



    Guides & Articles
    Regardless of whether you're shopping for a simple replacement muffler that delivers original equipment (OE) sound and performance or an upgraded muffler which provides a deeper growl with increased power through freer exhaust flow, you'll see choices between "direct fit" mufflers and "universal" mufflers. In this article, we'll help you understand the differences...
    It has been a battle of the ages to make exhaust sound like it should. Having less bends or turns will not only improve the sound but also performance. A custom exhaust is always an option for the race inspired and spirited weekend warriors. Our manufactures offer everything needed to build a custom exhaust to your preference.
    Headers are installed because the stock exhaust manifolds usually flow poorly. An exhaust header has individual tubes for each exhaust port, allowing each exhaust pulse to flow unobstructed from the cylinder head. The tubes on headers are usually larger in diameter than the runners on an exhaust manifold and the tubes are mandrel bent for gradual radius bends.
    Popular Popular Products

    1988 Honda CR-X Performance Exhaust Systems Reviews
    Average rating: 5 4.8 - 1 reviews
    (4.8)
    APPEARANCE
    EASE OF INSTALLATION
    PRICE/VALUE
    QUALITY
    | Posted by Theodore | (Grand Island, NY)

    I removed my catalytic converter completely and installed this. After a day or so, I got my car inspected by NYS and passed 2 thumbs up. Product definitely works.

    14 people found this review helpful.
    Was this review helpful for you? YesNo
    Share this review:
    1988 Honda CR-X Models
    • 1988 Honda CRX DX Performance Exhaust Systems
    • 1988 Honda CRX HF Performance Exhaust Systems
    • 1988 Honda CRX Si Performance Exhaust Systems