1985 Mazda RX-7 Performance Suspension

Change Vehicle
1 - 60 of 173 results
show:
sort by:
    • (0 reviews)
      # 14870040
      Mazda RX-7 With FC3S Chassis 1985, Airtech Front and Rear Air Suspension System by KSport®. Front Upper Mount: Rubber. Rear Upper Mount: Aluminum. KSport offers air suspension kits ranging from no frills with manual paddle controls...
      All air suspension kits include 4 air springs with height adjustability and 36 levels of damping adjustmentBasic kit features 1 Viair 380C air compressor, while Deluxe and above kits feature 2 Viair 380C air compressors
      $2,755.00 - $5,225.00
    • (0 reviews)
      # 14870046
      Mazda RX-7 With FC3S Chassis 1985, Airtech Front and Rear Air Strut Assemblies by KSport®. Quantity: 4 per Pack. Front Upper Mount: Rubber. Rear Upper Mount: Aluminum. This is a complete air strut assembly that matches the design...
      Replacement air strut assembly that matches design of those found on complete KSport kitsSave money by replacing only a damaged or worn air strut instead of an entire kit
      $1,995.00
    • (0 reviews)
      # 97079557
      Mazda RX-7 1985, HP Series™ Driver or Passenger Side Shock Absorber and Strut by Tokico®. Quantity: 1 Per Pack. TOKICO suspension strut is designed to meet the growing demand of modern vehicles for tough bottoming resistance....
      Twin-Tube internal designHigh performance quality
      $73.81 - $111.15
    • (0 reviews)
      # 12528010
      Mazda RX-7 GS / GSL / GSL-SE / S With Chassis Up to no. 8D*X 199999 1985, Anti-Sway Bar Kit by ST Suspensions®. Includes: Anti-Sway Bar. Boost the handling of your vehicle to more sophisticated levels with premium, one-piece front...
      Set of front and rear anti-roll sway barsEffectively decreases suspension lean and side-to-side body roll around turns
      $199.99 - $419.98
    • (0 reviews)
      # 89622471
      Mazda RX-7 1.1L 1985, Type ST Front Strut Bar by Cusco®. Strut Tower Bars eliminate chassis flex at the most vital area of the car - between the strut towers, essentially to prevent the misalignment of suspension mounting points...
      Made in Japan with proper quality controlCusco products are derived straight from the field of motorsports
      $144.00
    • (1 review)
      # 11078106
      Mazda RX-7 1985 Control Arm Bushings by Energy Suspension®. Performance. Material: Polyurethane. Energy Suspension lets you upgrade worn and crumbling rubber bushings that dampen vibrations at mounting points for front upper and...
      See Product Options for replacement bushing kits for lower and upper control arms, torsion arms, trailing arms, and track armsHigh-density polyurethane construction provides a superior cushioning effect and resists drying up and crumbling the way rubber mounts can
      $10.48 - $61.95
    • (0 reviews)
      # 40015008
      Mazda RX-7 1985 Front Strut Rod Bushings by Energy Suspension®. Performance. Material: Polyurethane. Energy Suspension lets you upgrade worn and crumbling rubber bushings that dampen vibrations at mounting points for front and rear...
      See Product Options for replacement bushing kits for front and rear strut towers, front and rear track arms, strut arms, and strut rodsSuspension C-bushing kits are available to restore positive camber lost after a vehicle has been lifted 2-4 inches, and over 4 inches
      $16.17
    • (1 review)
      # 40013255
      Mazda RX-7 1985 Sway Bar Bushings by Energy Suspension®. Performance. Material: Polyurethane. These are sets of replacement polyurethane bushings designed to exceed factory OEM levels of vibration dampening and support at the...
      Set of replacement polyurethane sway bar bushings (designed for front or rear applications) that meet or exceed OEM levels of vibration dampening refinementChoose the Front or Rear set that includes reinforced, zinc-coated outer steel mounting sleeves, or individual bushings-only sets
      $7.26 - $9.84
    • (0 reviews)
      # 61593920
      Mazda RX-7 GS / GSL / GSL-SE / S 1985, Front Sway Bar Link Washers by Whiteline®. Includes Cupped Washers Only without Bushings. Has the thin galvanised metal washers on your OE links flogged out? Whiteline have a specially...
      Precision engineered for your vehicleTested to outperform all comparable products on the market
      $8.82
    • (0 reviews)
      # 62357727
      Mazda RX-7 GS / GSL / GSL-SE / S 1985, Front Radius/Strut Rod Bushings, to Chassis by Whiteline®. Standard. Outer Diameter: 43.8 mm (1.72"). Inner Diameter: 22.2 mm (0.87"). Quantity: 2 per Pack. Not many know but worn suspension...
      Precision engineered for your vehicleTested to outperform all comparable products on the market
      $31.32
    • (0 reviews)
      # 71663996
      Mazda RX-7 GS / GSL / GSL-SE / S 1985, Rear Upper and Lower Trailing Arm Bushings by Whiteline®. Standard. Outer Diameter: 43.8 mm (1.72"). Inner Diameter: 19 mm (0.75"). Restore the rear end of your vehicle to as new condition and...
      Precision engineered for your vehicleTested to outperform all comparable products on the market
      $53.82
    • (0 reviews)
      # 71664774
      Mazda RX-7 GS / GSL / GSL-SE / S 1985, Rear Watts Link Pivot Bushing by Whiteline®. Outer Diameter: 44.3 mm (1.74"). Inner Diameter: 22.2 mm (0.87"). Quantity: 1 per Pack. Replace worn suspension bushings to as new condition and...
      Precision engineered for your vehicleTested to outperform all comparable products on the market
      $17.82
    • (0 reviews)
      # 149998548
      Mazda RX-7 GS / GSL / GSL-SE / S 1985, Sway Bar Bushing by Whiteline®. Whiteline sway bar products improve sway bar effectiveness for more balanced and predictable cornering.
      Precision engineered for your vehicleTested to outperform all comparable products on the market
      $17.82 - $26.82
    • (0 reviews)
      # 11094180
      Mazda RX-7 1985 Shock and End Links Bushings by Energy Suspension®. Energy Suspension offers replacement polyurethane bushings for mounting points on shock absorbers, rear Watts Link arms, and sway bar end links. They exceed OEM...
      Kit provides parts for left and right front sway bar end linksBushing sets include reinforced, zinc-coated steel tubes for mounting
      $16.49 - $33.94
    • (0 reviews)
      # 149998545
      Mazda RX-7 GS / GSL / GSL-SE / S 1985, Strut Tower Brace by Whiteline®. Whiteline strut tower bracing are very simple to install and feature light weight polished aluminium channel and powder coated mounting plates. Quick release...
      Precision engineered for your vehicleTested to outperform all comparable products on the market
      $116.82
    • (0 reviews)
      # 17926820
      Mazda RX-7 GS / GSL / S 1985, OESpectrum™ Rear Driver or Passenger Side Shock Absorber by Monroe®. Quantity: 1 per Pack. Length: 13.625" Compressed, 21.125" Extended with 7.5" Stroke. With Metal Dust Shield. With Extended Bumper...
      Provide unprecedented handling precision and controlNitrogen gas charged
      $39.62
    • (0 reviews)
      # 17812086
      Mazda RX-7 without Electronic Adjustable Suspension 1985, Excel-G™ Driver or Passenger Side Shock and Strut by KYB®. 2 are Needed per Vehicle. Restore your vehicle's original performance for normal driving conditions with the...
      Designed to restore original handling and controlCalibrated to compensate for age and miles driven
      $34.13 - $35.03
    • (0 reviews)
      # 70103764
      Mazda RX-7 1985, Front Lower Ball Joint by Mevotech®. Quantity: 1 per Pack. Experience improved ride comfort and smooth handling with the replacement Mevotech ball joints. They grip the control arm better and guarantee worry-free...
      Includes durable higher and lower metal bearings for a smoother and quiet handlingKnurling on the outer housing of the ball joint makes for a better grip with the control arm
      $24.44 - $25.00
    • (0 reviews)
      # 36206380
      Mazda RX-7 1985, Front Lower Ball Joint by Beck Arnley®. For one hundred years, Beck/Arnley has been providing premium OE quality parts for vehicles. Beginning with motorcycle parts in 1914 and transitioning to import vehicles in...
      OE quality products from top original equipmentTop quality materials
      $38.88
    • (0 reviews)
      # 64787075
      Mazda RX-7 1985, Premium Front Lower Ball Joint by Centric®. The company has one of the industry’s best programs for tracking and cataloging original equipment, and devising quality aftermarket and OE parts for consumers,...
      Intended for a comfortable driving experienceExpertly crafted from premium materials
      $20.40
    • (0 reviews)
      # 49547715
      Mazda RX-7 1985, Front Lower Cam Bolt Kit by Falcon®. 2 per Vehicle. Falcon Steering Cam Bolt Kit are made of the highest quality in the aftermarket. All Cam Bolt Kit meet or exceed OE requirements and are precision machined for a...
      Produced to exact OE dimensional specifications under strict quality control throughout the manufacturing and assembly processPremium performance components
      $10.27 - $13.49
    • (0 reviews)
      # 21690463
      Mazda RX-7 1985, Alignment Camber Kit by MOOG®. At Front Lower Strut Mount. 1 per Pack. With 12mm Bolts. Upgrade your vehicle to MOOG and experience a safe and comfortable ride. The parts are made tough to ensure reliable operation...
      Designed to make steering and suspension repairs easyDirect fit
      $15.88 - $16.60
    • (0 reviews)
      # 21644175
      Mazda RX-7 1985, Alignment Camber Wedge Kit by MOOG®. At Front Lower Strut Mount. 2 per Pack. Adjustment Range: -2 to 2 Degree of Camber. Includes: 2 Wedges, 2 Bolts and Nuts. Upgrade your vehicle to MOOG and experience a safe and...
      Designed to make steering and suspension repairs easyDirect fit
      $19.28
    • (0 reviews)
      # 64619875
      Mazda RX-7 S 1985, Premium Front Strut Bumper by Centric®. The company has one of the industry’s best programs for tracking and cataloging original equipment, and devising quality aftermarket and OE parts for consumers, mechanics...
      Intended for a comfortable driving experienceExpertly crafted from premium materials
      $16.32
    • (0 reviews)
      # 98964983
      Mazda RX-7 1985, Front Sway Bar Link Kit by Mevotech®. Quantity: 2 per Vehicle. Stabilizer links transfer weight between the left and right sides of a vehicle. When a vehicle makes a turn, lateral force is applied proportional to...
      Built to match or go beyond OE standardsDirect replacement
      $7.36 - $9.90
    • (0 reviews)
      # 35845666
      Mazda RX-7 1985, Sway Bar Link Kit by Beck Arnley®. For one hundred years, Beck/Arnley has been providing premium OE quality parts for vehicles. Beginning with motorcycle parts in 1914 and transitioning to import vehicles in the...
      OE quality products from top original equipmentTop quality materials
      $8.28 - $8.46
    • (0 reviews)
      # 68742271
      Mazda RX-7 1985, C-Tek™ Front Stabilizer Bar Link by Centric®. The company has one of the industry’s best programs for tracking and cataloging original equipment, and devising quality aftermarket and OE parts for consumers,...
      Intended for a comfortable driving experienceExpertly crafted from premium materials
      $6.44
    • (0 reviews)
      # 64624269
      Mazda RX-7 1985, Premium Front Stabilizer Bar Link by Centric®. The company has one of the industry’s best programs for tracking and cataloging original equipment, and devising quality aftermarket and OE parts for consumers,...
      Intended for a comfortable driving experienceExpertly crafted from premium materials
      $8.78
    • (0 reviews)
      # 17930089
      Mazda RX-7 GS / GSL / S 1985, Strut-Mate™ Front Strut Boot Kit by Monroe®. Body Length: 2". With 6.769" Stroke. The boot kit is designed to protect the strut piston rod from stones, mud, water, sand, and other abrasives providing...
      Protects the piston rod from corrosion, dirt, moisture and impact.Prolongs strut service life
      $15.93
    • (0 reviews)
      # 85046971
      Mazda RX-7 GS / GSL / S 1985, Strut-Mate™ Front Strut Mounting Kit by Monroe®. Monroe strut components meet or exceed the requirements specified by the original equipment manufacturers.
      Made with precision and quality in mindBuilt to last
      $27.61
    • (0 reviews)
      # 21646687
      Mazda RX-7 GS / S 1985, Front Strut Bellows by MOOG®. 1 per Pack. With Bump Stop. Includes: Bumper. Upgrade your vehicle to MOOG and experience a safe and comfortable ride. The parts are made tough to ensure reliable operation even...
      Designed to make steering and suspension repairs easyDirect fit
      $18.09
    • (0 reviews)
      # 21648490
      Mazda RX-7 GS / S 1985, Front Strut Mount by MOOG®. 1 per Pack. Is there excessive play in your steering wheel? Does your vehicle drift or pull, or veer when it hits a bump? Is your power steering noisy and does it leak? Your...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $61.98
    • (0 reviews)
      # 49488705
      Mazda RX-7 1985, Front Stabilizer Bar Link Kit by Falcon®. 2 per Vehicle. 6.65" Length. Falcon steering sway bar links are designed to last longer than typical aftermarket sway bar links. Improvements made in the rubber on Bolt and...
      High strength steel boltsGuarantees good performance under high loads
      $4.32
    • (0 reviews)
      # 57030118
      Mazda RX-7 1985, Premium™ Front Stabilizer Bar Link Kit by MOOG®. 1 per Pack. Includes: Polyurethane Bushings and Solid Metal Sleeve for Enhanced Performance. Barrel Nut Allows for Easier Installation. Upgrade your vehicle to...
      Designed to make steering and suspension repairs easyDirect fit
      $8.63
    • (0 reviews)
      # 57030113
      Mazda RX-7 1985, Standard Design Front Stabilizer Bar Link Kit by MOOG®. 1 per Pack. Upgrade your vehicle to MOOG and experience a safe and comfortable ride. The parts are made tough to ensure reliable operation even under extreme...
      Designed to make steering and suspension repairs easyDirect fit
      $7.74
    • (0 reviews)
      # 69956211
      Mazda RX-7 1985, Professional™ Front Stabilizer Bar Link Kit by ACDelco®. Designed utilizing the latest technology, this product by ACDelco features premium quality and will perform better than advertised. Perfect for your...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $13.41
    • (0 reviews)
      # 17797242
      Mazda RX-7 GS / GSL / GSL-SE / S without Electronic Adjustable Suspension 1985, Front Shock/Strut Bellow by KYB®. Quantity: 1 per Pack. These bellows provide effective protection from dirt and moisture by covering the entire piston...
      Keep leak-causing contaminants away from polished strut shaftProtect upper seal and bushing
      $16.43
    • (0 reviews)
      # 17798132
      Mazda RX-7 GS / GSL / S without Electronic Adjustable Suspension 1985, Front Strut Mount by KYB®. 2 are Needed per Vehicle. When replacing struts, it's also a great idea to replace strut mounts too. They optimize suspension...
      On front struts, the mount includes a bearing that acts as a pivot for the steering mechanism, providing a smooth steering responseEnables accurate wheel alignment
      $36.32
    • (0 reviews)
      # 164305607
      Mazda RX-7 GS / S 1985, Front Strut Bumper Kit by Mevotech®. Quantity: 2 per Vehicle. Warranty: Lifetime or 60,000 Miles. Includes: Bellow. Don’t just repair or replace worn components – bolster them with Mevotech parts. Put...
      Built to match or go beyond OE standardsDirect replacement
      $17.78
    • (0 reviews)
      # 164306619
      Mazda RX-7 1985, Front Strut Mounting Kit by Mevotech®. Quantity: 2 per Vehicle. Warranty: Lifetime or 60,000 Miles. Strut mounts, sometimes referred to as bearing plates, are a vital link in the suspension as they connect a...
      Built to match or go beyond OE standardsDirect replacement
      $27.42
    • (0 reviews)
      # 64103568
      Mazda RX-7 1985, Front Strut Bellows Set by Sachs®. 2 Per Vechicle. SACHS boots and bump stops protect dampers from contaminates and bottoming out, increasing service life. SACHS suspension products are engineered for the driver...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $15.46
    • (0 reviews)
      # 164306620
      Mazda RX-7 1985, Front Lower Control Arm Bushing Kit by Mevotech®. Quantity: 2 per Vehicle. Warranty: Lifetime or 60,000 Miles. Control arm bushings provide a pivot point from the control arm and maintain the lateral and vertical...
      Built to match or go beyond OE standardsDirect replacement
      $12.73
    • (0 reviews)
      # 64631376
      Mazda RX-7 1985, Premium Front Lower Control Arm Bushing by Centric®. The company has one of the industry’s best programs for tracking and cataloging original equipment, and devising quality aftermarket and OE parts for...
      Intended for a comfortable driving experienceExpertly crafted from premium materials
      $8.78
    • (0 reviews)
      # 21645645
      Mazda RX-7 Manufactured After Chassis NO. 531681 1985, Front Lower Control Arm Bushing by MOOG®. 1 per Pack. Replace your worn or damaged bushings with stronger and longer-lasting bushings from MOOG that effectively absorb...
      Restore handling and enable proper alignmentReduce noise
      $8.48
    • (0 reviews)
      # 35803428
      Mazda RX-7 1985, Front Control Arm Bushing by Beck Arnley®. For one hundred years, Beck/Arnley has been providing premium OE quality parts for vehicles. Beginning with motorcycle parts in 1914 and transitioning to import vehicles...
      OE quality products from top original equipmentTop quality materials
      $10.34
    • (0 reviews)
      # 19261021
      Mazda RX-7 1985, Front Improved Design Alignment Camber Kit by Mevotech®. Quantity: 1 per Vehicle. Adjustment Range: From -1-1/4 to +1-1/4 Degrees. Don’t just repair or replace worn components – bolster them with Mevotech...
      Built to match or go beyond OE standardsDirect replacement
      $14.45 - $15.13
    • (0 reviews)
      # 77964329
      Mazda RX-7 1985, Front Alignment Camber Bolt Assortment by MOOG®. 1 per Pack. Upgrade your vehicle to MOOG and experience a safe and comfortable ride. The parts are made tough to ensure reliable operation even under extreme...
      OE quality parts from top original equipment and aftermarket manufacturersThe finest quality at a great price
      $259.63
    • (0 reviews)
      # 69993134
      Mazda RX-7 1985, Professional™ Front Alignment Camber Bolt Kit by ACDelco®. Comprehensive kits make replacing worn parts efficient and cost effective. Chassis bushing kits and alignment products were precision-designed to...
      Wide range of OE-like parts to meet a wide range of applications.Standard and Extended Range (for lowered vehicles) front control arm anchors.
      $16.45 - $16.49
    • (0 reviews)
      # 92765347
      Mazda RX-7 GS / GSL / S 1985, Front Strut Mount by Westar®. Westar is a widely recognized manufacturer and exporter of rubber to metal bonded parts for all types of trucks and automobiles. Every single product goes through...
      Ideal fro Silencing the engine after OE mounts have worn outBuilt to last from the best rubber
      $20.99
    • (0 reviews)
      # 103935426
      Mazda RX-7 1985, Front Sway Bar Link Bushing by AST®. Includes: 4 Bushings. Does your luxury car ride like an old buckboard wagon? Is your pickup still bouncing long after the bump? If so your suspension is in need of repair, but...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $8.89
    • (0 reviews)
      # 8968238
      Mazda RX-7 1985, Sway Bar Link Bushing by Terada®. Does your luxury car ride like an old buckboard wagon? Is your pickup still bouncing long after the bump? If so your suspension is in need of repair, but before you waste your time...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $2.15 - $3.36
    • (0 reviews)
      # 151405659
      Universal 5165 Series 46mm Smooth Body Monotube Shock Absorber by Bilstein®, 1 per Pack. Without Boot. Finish: Zinc Plated. Lower Mount: Eye 5/8". Get the benefits of a remote reservoir with BILSTEIN's universal fit 5165 shocks for...
      BILSTEIN’s industry leading monotube designRemote reservoir dramatically increases shock oil capacity for even greater heat dissipation and damping sensitivity
      $184.99 - $207.10
    • (0 reviews)
      # 151405660
      Universal 7100 Classic Series 46mm Smooth Body Monotube Shock Absorber by Bilstein®, 1 per Pack. Without Reservoir. The 7100 Classic Series are the most successful shock absorbers in off-road racing history. Since their inception...
      Monotube gas pressure constructionThreaded Body Lengths to 10" Travel
      $133.74 - $176.35
    • (0 reviews)
      # 151405661
      Universal 7100 Classic Series 46mm Threaded Body Monotube Coilover Shock Absorber by Bilstein®, 1 per Pack. Without Reservoir. Without Boot. Finish: Zinc Plated. Upper Mount: 1/2" Heim. Lower Mount: 1/2" Heim. The versatile 7100...
      Monotube gas pressure constructionSelf-Adjusting Deflecting Disc Valving
      $202.42 - $278.18
    • (0 reviews)
      # 151405662
      Universal 7100 Series 46mm Smooth Body Monotube Coilover Shock Absorber by Bilstein®, 1 per Pack. Without Boot. Finish: Electroless Nickel with Clear Powdercoat. Lower Mount: 1/2" Heim. The versatile 7100 Series shocks are designed...
      Monotube gas pressure constructionSelf-Adjusting Deflecting Disc Valving
      $169.94 - $271.90
    • (0 reviews)
      # 151405663
      Universal 8125 Series Shock Absorber by Bilstein®, 1 per Pack. Without Boot. Finish: Zinc Plated. With Screw Body Top. Upper Mount: 5/8" heim with 1/2" heim spacers (1.5" width spacing). Lower Mount: 5/8" heim with 1/2" heim...
      Threaded body with dual rate coilover hardwareMonotube design for fade-free performance
      $396.13 - $604.14
    • (0 reviews)
      # 151405664
      Universal 9100 Rock Crawler Series 46mm Threaded Body Monotube Coilover Shock Absorber by Bilstein®, 1 per Pack. With Reservoir. Without Boot. Finish: Electroless Nickel. With Screw Body Top. Upper Mount: 1/2" Heim. Lower Mount:...
      Monotube gas pressure constructionNickel plated 2" diameter threaded body
      $347.43 - $380.17
    • (0 reviews)
      # 151405665
      Universal 9100 Series Shock Absorber by Bilstein®, 1 per Pack. With Reservoir. Without Boot. Finish: Electroless Nickel. Compression/Rebound: Custom/Custom. Upper Mount: 1/2" Heim. Lower Mount: 1/2" Heim. BILSTEIN off-road racing...
      Monotube gas pressure constructionValving can be adjusted internally for rebound and compression.
      $366.93 - $817.85
    • (0 reviews)
      # 142045294
      Universal 9200 Series 70mm 4-Tube Bypass Monotube Shock Absorber by Bilstein®, 1 per Pack. With Reservoir. Without Boot. Finish: Zinc Plated. Compression/Rebound: Custom/Custom. Upper Mount: Eye 5/8". Lower Mount: Eye 5/8"....
      Available in 60mm*, 70mm* and 83mm* monotubes4-tube, position sensitive with adjustable rebound and compression
      $1,117.73 - $1,159.88
    • (0 reviews)
      # 151405669
      Universal 9300 Black Hawk Series 76mm 4-Tube Bypass Monotube Shock Absorber by Bilstein®, 1 per Pack. With Reservoir. Without Boot. Finish: Clear Anodized. With Screw Body Top. Compression/Rebound: Custom/Custom. Upper Mount: 3/4"...
      Monotube internal designOne piece 6061 extruded aluminum body with hard anodized finish
      $2,318.63 - $2,486.63




    Guides & Articles

    • Off-Road Bumpers
      Skid Plates Provide The Ultimate In Off-Road Protection
      If you take your 4x4 off-roading, you have likely gained an appreciation of how unforgiving trails can be when it comes to your vehicle's underside. Deep ruts with rough edges can appear out of nowhere, sturdy-looking rocks can shift unexpectedly, and tranquil bodies of water can hide everything from sinkholes to fallen tree trunks. Before you know it, the underside of your truck has bounced off something hard enough to damage moving suspension components or puncture housings containing engine oil, gasoline, transmission fluid, or differential gear oil.
    • Performance Suspension Parts
      How much lift is needed for larger tires on my 2007-up Jeep Wrangler?
      Twenty years after the first Jeep Wrangler model debuted in 1987, third-generation Wranglers were introduced for the 2007 model year. Unlike any previous Wranglers or CJs, a 4-door Unlimited model (known internally as the "JKU" body) was offered alongside the standard 2-door ("JK" body). Because it took the off-road capability Wranglers are known for and broadened it with the practicality of 4 doors for those needing a family vehicle, third-generation Wranglers have proven very successful in the marketplace. Maintaining Jeep tradition, this Wrangler appeals by offering a higher-than-average number of advantages for the 4x4 enthusiast, whether it's used for rock crawling or as an everyday driver.
    • Performance Suspension Parts
      Coilovers Are Pricey - Why Would I Spend My Money For Them?
      When first glancing through the Performance Coilover Kits section of our website, you may be put off by some of the prices you see. After all, what are you buying other than a combo set of springs and shocks under some fancy name? Certainly, you ask yourself, can't you purchase springs and shocks separately and monetarily come out ahead?
    • Performance Suspension Parts
      Body Lifts & Suspension Lifts From 2 to 10 Inches | What are my Lift Kit Choices?
      Has this happened to you? You catch a glimpse of a truck like yours in a parking lot or around town that, for some reason, you like better than your own. It seems to have a stance that's more rugged-looking and more suited to a 4x4 than yours does. Maybe you get a chance to stop and take a closer look immediately, or maybe it's days or weeks before you see the other truck again.
    • Automotive Tools
      What Special Tools Are Available For Suspension Repair?
      Seasoned professional automotive technicians often say if you're using too much physical effort during a repair, you're simply not using the right tool. This is true, and a perfect example is repairing and replacing suspension components. If you've ever done this type of work or attempted to do it, you know it can be trickier than merely loosening and tightening bolts.
    • Performance Suspension Parts
      Coil, Leaf, & Torsion Bar | Describing The 3 Different Kinds of Springs
      The springs in your vehicle probably aren't something you think about until there's a problem or you've decided to upgrade suspension parts in the interest of sportier handling. But what specifically do springs do? In short, they play a major role in the safe handling and ride comfort of your vehicle. Not only do they keep a vehicle at a designated standing height, they provide recoil necessary to bounce back after suspension components move up and down over uneven road surfaces. By themselves, springs will continue to bounce up and down for a long time unless a motion damper such as a shock absorber is present to keep things stable. Springs can be soft and extremely bouncy, or they can be stiffer and less bounce-prone.
    • Performance Suspension Parts
      How Do Shock Absorbers Work?
      Shock absorbers (also known as "shocks") are the suspension components which slow, then stop, the up-and-down bouncing movement of your vehicle's springs through a process known as dampening. Without shocks to calm things down, springs will continue to extend and release energy they absorb from bumps in the road at an uncontrolled rate - bouncing for a long time until their kinetic energy finally dissipates. Needless to say, this would produce an extremely bouncy ride that would be hard to control over uneven road surfaces.
    • Performance Transmission Parts
      Suspension Enhancements Will Raise The Rear Of Your Tow Vehicle
      If you are using your "daily driver" car or truck for occasional towing duty, you are looking for that ideal sweet spot where the weekday commute is comfortable and quiet, and the weekend trailering feels solid and secure. In other words, you don't want to vehicle to feel too "stiff" during the week, nor do you want it to ride "soft" when pulling a trailer.
    • Wheels & Rims
      Stanced Wheels, Demon Camber | How Do I Get That Look?
      Stanced. Demon camber. You may know it as oni-camber. You've seen the look, and whether you like it or not is totally beside the point. The great thing about this stanced look is that it gets your attention. From the interviews we've read with owners and drivers of these machines, that is exactly what they are after. They've said that it's all about being noticed.
    • Performance Suspension Parts
      Stock vs Performance Suspension
      Very often we don't even realize what a crucial role a car's suspension plays in providing a safe and comfortable ride. The system maximizes the friction between the road surface and your vehicle's tires, ensuring steering stability along with responsive handling.
    • Performance Suspension Parts
      Shocks Versus Struts: The Big Answers Revealed!
      Shock absorbers, also known simply as “shocks” (which is what we will call them for the rest of this article), are the suspension components which stop your car or truck from bouncing up and down after hitting a bump. They are a major contributor to your ride comfort and safety.
    • Replacement Suspension Parts
      How to Inspect Your Suspension System
      The very first thing to know about timely suspension system diagnosis is that the stability and steering control of your vehicle and, what is more important, your safety on the road depends on how often you make it. Automotive suspension belongs to one of those car systems that are constantly exposed to high loads and thus are prone to wear and tear. Most specialists recommend inspecting suspension system after every 6,500-7,500 miles or when there are any signs of its breakage.
    • Performance Suspension Parts
      How Low Can You Go?
      Lowering is high on the list of many people who want to improve the appearance of their car. If you want to lower your car with the coil springs, then replacing them with lowering springs is the way to go. But what if you want to lower your car and also make it handle better? If that’s your goal then consider coil-over shocks.

    Popular Products

    1985 Mazda RX-7 Performance Suspension Reviews

    Average rating:  5  5 - 1 review
    4.8 of 5
    Installation
    My only knock on these would be ease of installation. The sway bar end bushings should be split in half so they go in easier rather than requiring a vise or gorilla squish to fit them. Otherwise, another great product.
    TPosted by Tyler (Boise, ID) /
    1985 Mazda RX-7
    Was this review helpful for you? Yes1  person found this review helpful.
    Related 1985 Mazda RX-7 Pages
    1985 Mazda RX-7 Models
    SECURE SHOPPING

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
    It is neither inferred nor implied that any item sold by CARiD.com, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.