- Raised corners for better entry and exit under the most extreme conditions
- High-degree approach angles to maximize ground clearance
- Built-in winch plate can accommodate up to a 15,000 lb. winch
- Constructed from thick 3/16" cold rolled steel
- Robotically welded to exact specifications
- One-piece welded design
- All welds ground down and smoothed
- Includes 2 D-ring mounts
- Includes built-in jacking points
- Dual stage textured black powder coated finish
- Optional 1.75" diameter 0.120" wall thickness bull bar with 2 light tabs
- Easy bolt-on installation; no modifications to your vehicle required
- Comes with mounting hardware and detailed instructions
- 5-year limited warranty on bumper finish
- Limited lifetime warranty against defects in workmanship and materials
When you want to go rock crawling with your Jeep, you know you have to replace your stock front bumper. It was made to satisfy highway regulations and it's fine for cruising the boulevard, but off-road it's only going to get in the way, not provide much protection, and won't mount most off-road accessories. For maximum rock crawling ground clearance, maximum protection, and maximum accessory mounting capability you can't do better than the Smittybilt XRC Front Bumper.
The XRC is designed with raised corners and high-degree approach angles for greater tire travel and enhanced entry and exit points. With the XRC you'll never have to worry about getting hung up. But even though the XRC is smaller than your stock bumper, it's much tougher. Constructed from thick 3/16" cold rolled steel, all joints are robotically welded to the exact design specifications.
Besides its ruggedness and rock crawling creds, the XRC has a built-in winch plate that can accommodate up to a 15,000 lb. winch, with the option of running an aluminum or roller fairlead. It includes solid D-ring mounts and built-in jacking points. And for the best appearance and long-term durability, all welds are ground down and smoothed, the bumper is acid dipped to remove impurities, a special "E-Coat" is applied inside and out, and finally a dual stage textured black powder coat finish is applied.
Designed to be an easy bolt-on installation, the XRC comes with all necessary mounting hardware and detailed instructions. For additional protection a 1.75" diameter 0.120" wall thickness bull bar is available (sold separately). It includes 2 light tabs that can accommodate up to a 9" light. The XRC Front Bumper is covered by a 5-year limited warranty against finish defects and a Smittybilt Advantage limited lifetime warranty against defects in materials and workmanship.449.99
Brand: Smittybilt Part Numbers:
SmittyBilt®, located in Compton, California, is the leader in the off-road parts and accessories market because they were there at its inception. Founder Basil Smith, also known as "Smitty", was one of the original Southern California 4WD enthusiasts. He started a business called Rock-ett Products, making specialized equipment for trucks and Jeeps, in his garage/machine shop in 1956. Smitty's son Tom began working at Rock-ett at an early age and became head of the ever-expanding enterprise when it became Smittybilt in the 1970s. Under Tom's leadership, the company created innovative products like the original "Nerf Bar" side step, and tubular front and rear bumpers for Jeeps. Today, thanks to their continued involvement in off-roading at all levels of the staff, which enables them to keep abreast of the latest trends and needs in the off-road market, Smittybilt remains the industry leader with a selection of over 2000 different products for trucks and SUVs.Product Reviews (2)
Every Customer can leave a review about our service and the product that was purchased. In order to leave your review for your new product, please follow the link in the email you receive after completing your purchase. You can rate appearance, ease of installation, price/value and product quality.Smittybilt® - XRC Front BumperAverage Rating: 4.8 of 5APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYAll Smittybilt Reviews(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2001 Jeep Cherokee
| Posted by Everardo | (Las Cruces, NM)
The product was built with a high degree of quality. The whole unit had perfect dimensions for my vehicle, which made it easy to install. It also looks great on my vehicle.Was this review helpful for you? YesNoShare this review:(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY2001 Jeep Cherokee
| Posted by Mark | (San Antonio, TX)
The product was packaged very well and shipped quickly. The bull bar mounts very easily and securely. It looks great on the vehicle and will provide the desired protection for the front of the vehicle.8 people found this review helpful.Was this review helpful for you? YesNoShare this review:
Product Reviews (2)
Product Reviews (2)
You will never pay more with CARiD! Not only will we match prices from any competitor's website or other reputable source, we will continue to honor that promise for up to one year after your purchase.
We'll match the price at time of purchase, or refund you the difference if done after the purchase. Either way, we are totally committed to providing you the best online shopping experience.
We're car and truck enthusiasts, just like you! And it's enthusiasts we hire in our Sales and Service Centers. Many of our staff are ASE certified and have spent years in the retail auto business.
We conduct our own in-house training, and we even bring vendors to us for hands-on product training demonstrations. You're getting true expertise when you phone or email us!
With hundreds of vendors, and tens of thousands of components for sale, we put tremendous effort into coordinating our data with our vendors' data in order to guarantee that you get the correct part.
Our huge database is regularly cross-checked to keep it current and optimized. At times, our thoroughness makes our data even more accurate than our suppliers! This rigorous process means that you can always order with confidence.