1980 Saab 900 Performance Suspension

Change Vehicle
1 - 60 of 167 results
show:
sort by:
    • (0 reviews)
      # 40881592
      Saab 900 1980, B6 Series Heavy Duty 46mm Monotube Driver or Passenger Side Shock Absorber for Stock Height Vehicles by Bilstein®, 1 per Pack. With Blue Straight Boot. Finish: Yellow Paint. Upper Mount: Stem. If you expect more...
      Increased power reserves and service life, even when pulling transporters and trailers or during frequent journeys with loadsOptimum adhesion and enhanced lane change stability in both day to day and extreme situations
      $113.86 - $125.65
    • (0 reviews)
      # 139140539
      Saab 900 1980, Air Springs by Air Lift®. Set of two adjustable secondary air helper springs designed to mount inside your existing coil springs and add up to 1,000 pounds of leveling capacity for heavy loads. Adds ride comfort and...
      Set of two springs support designed to fit within the center of coil springsSized for your make and model specifically
      $102.85 - $1,450.00
    • (0 reviews)
      # 9823175
      Saab 900 1980, II Load Controller by Air Lift®. Equal Path, for Intermittent Use, Single Gauge. Includes: Compressor, Single Gauge with Controls, Pressure Sensor, Wiring Harness, Air Lines, Fittings. LoadController systems are air...
      Dual-path design compressors allow left- or right-side springs on the same axle to be controlled independently of each otherHeavy-duty strength compressors are recommended for daily or commercial use, run quieter, and provide better filtration
      $231.75
    • (0 reviews)
      # 17167978
      Saab 900 1980, B4 Series Replacement Standard Twin-Tube Driver or Passenger Side Shock Absorber for Stock Height Vehicles by Bilstein®, 1 per Pack. With Black Straight Boot. Finish: Black Paint. Upper Mount: Stem. BILSTEIN has a...
      Constant damping characteristics under any loadConsistent performance and handling give the vehicle a new car feel every time
      $50.36 - $52.14
    • (0 reviews)
      # 17927582
      Saab 900 EMS / GLE Hatchback 1980, OESpectrum™ Driver or Passenger Side Shock Absorber by Monroe®. Quantity: 1 per Pack. With Metal Dust Shield. Without Extended Hydraulic Lockout. Upper Mounting Code: Stem Mount - Stem Length x...
      Provide unprecedented handling precision and controlNitrogen gas charged
      $31.16 - $32.39
    • (0 reviews)
      # 17813376
      Saab 900 1980, Excel-G™ Driver or Passenger Side Shock Absorber by KYB®. Quantity: 1 per Pack. Restore your vehicle's original performance for normal driving conditions with this twin-tube gas hydraulic shock that offers...
      Designed to restore original handling and controlCalibrated to compensate for age and miles driven
      $28.50 - $29.61
    • (0 reviews)
      # 17817564
      Saab 900 1980, Gas-a-Just™ Driver or Passenger Side Shock Absorber by KYB®. Quantity: 1 per Pack. Go with Gas-a-Just shocks and struts and experience greater stability, handling, and control over twin-tube designs. Whether your...
      Replacement for an OE monotube shock to restore/keep the vehicle's original performance characteristicsIdeal as an upgrade from an OE twin-tube for quicker, more responsive handling and control
      $35.82 - $45.86
    • (0 reviews)
      # 64263516
      Saab 900 without Aero or Sport Package (SPG) 1980, Advantage Front Passenger or Driver Side Shock Absorber by Sachs®. 1 per Pack. SACHS shock absorbers distinguish themselves through original equipment quality and innovative...
      $65.49
    • (0 reviews)
      # 64263517
      Saab 900 With Aero or Sport Package (SPG) 1980, Super Touring™ Rear Passenger or Driver Side Shock Absorber by Sachs®. 2 Per Vechicle. SACHS shock absorbers distinguish themselves through original equipment quality and innovative...
      $65.49
    • (0 reviews)
      # 7703777
      Saab 900 1980, Control Arm by Professional Parts Sweden®. Without B-Joint and Bushings. Position: Front Right Lower. Does your luxury car ride like an old buckboard wagon? Is your pickup still bouncing long after the bump? If so...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $67.80
    • (0 reviews)
      # 98908700
      Saab 900 1980, Rear Coil Springs by Mevotech®. Quantity: 2 per Pack. Warranty: Lifetime or 60,000 Miles. Spring Rate: Variable. You can improve the efficiency of your vehicle's suspension system and restore factory-like...
      Restore the vehicle's suspension performanceDirect replacement for proper fitment
      $64.78
    • (0 reviews)
      # 170491965
      Saab 900 Hatchback 1980, Problem Solver™ Rear Coil Spring Set by MOOG®. 2 per Pack. Diameter: 0.60". Inlet Diameter: 3.31". Upgrade your vehicle to MOOG coil springs that are designed to restore the original handling, reduce body...
      Direct fit, with no modificationsRestores and retains proper handling
      $54.36
    • (0 reviews)
      # 19203575
      Saab 900 1980, Front Ball Joint by Mevotech®. Quantity: 1 per Pack. Experience improved ride comfort and smooth handling with the replacement Mevotech ball joints. They grip the control arm better and guarantee worry-free...
      Includes durable higher and lower metal bearings for a smoother and quiet handlingKnurling on the outer housing of the ball joint makes for a better grip with the control arm
      $16.65 - $17.86
    • (0 reviews)
      # 77545194
      Saab 900 1980, Front Suspension Ball Joint by URO Parts®. Replacing your worn out suspension component with this top-notch part is the easiest way to restore your vehicle's handling and performance. Manufactured from the finest...
      Replaces your worn out suspension partHelps to optimize your suspension system to restore proper handling and performance
      $19.92
    • (0 reviews)
      # 36252215
      Saab 900 1980, Ball Joint by Beck Arnley®. For one hundred years, Beck/Arnley has been providing premium OE quality parts for vehicles. Beginning with motorcycle parts in 1914 and transitioning to import vehicles in the 1950’s,...
      OE quality products from top original equipmentTop quality materials
      $28.49
    • (0 reviews)
      # 52888202
      Saab 900 1980, Ball Joint by Lemfoerder®. Does your luxury car ride like an old buckboard wagon? Is your pickup still bouncing long after the bump? If so your suspension is in need of repair, but before you waste your time and gas...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $46.97
    • (0 reviews)
      # 55988150
      Saab 900 Hatchback 1980, Front Upper Ball Joint by MOOG®. 1 per Pack. No Greasable. MOOG ball joints are the preferred choice of many professional technicians and incorporate proven design and advanced engineering features to...
      Engineered to retain socket torque and smooth articulation over the life of the part, to maintain tight steering feelExclusive powdered-metal bearing design allows grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
      $35.65
    • (0 reviews)
      # 64836937
      Saab 900 1980, Premium Ball Joint by Centric®. The company has one of the industry’s best programs for tracking and cataloging original equipment, and devising quality aftermarket and OE parts for consumers, mechanics and car...
      Intended for a comfortable driving experienceExpertly crafted from premium materials
      $16.62
    • (0 reviews)
      # 64263518
      Saab 900 With Aero or Sport Package (SPG) / without Aero or Sport Package (SPG) 1980, Front Strut Mount by Sachs®. 2 Per Vechicle. Includes: Strut Mount And Bearing. The suspension strut mount is the upper mounting point of the...
      No effort necessaryCan be remote controlled
      $67.45
    • (0 reviews)
      # 8668499
      Saab 900 1980, Front Lower Shock Bushing by MTC®. Does your luxury car ride like an old buckboard wagon? Is your pickup still bouncing long after the bump? If so your suspension is in need of repair, but before you waste your time...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $5.81
    • (1 review)
      # 7701807
      Saab 900 1980, Control Arm Bushing by Professional Parts Sweden®. Does your luxury car ride like an old buckboard wagon? Is your pickup still bouncing long after the bump? If so your suspension is in need of repair, but before you...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $6.14 - $8.96
    • (0 reviews)
      # 7689055
      Saab 900 1980, Shock Bushing by Professional Parts Sweden®. Position: Front Lower. Does your luxury car ride like an old buckboard wagon? Is your pickup still bouncing long after the bump? If so your suspension is in need of...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $2.02
    • (0 reviews)
      # 8667294
      Saab 900 1980, Ball Joint Bolt Kit by MTC®. Does your luxury car ride like an old buckboard wagon? Is your pickup still bouncing long after the bump? If so your suspension is in need of repair, but before you waste your time and...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $4.20
    • (0 reviews)
      # 164305678
      Saab 900 1980, Front Alignment Shim by Mevotech®. Quantity: 24 per Pack. Warranty: Lifetime or 60,000 Miles. Length: 1/32". Width2-7/16". 9/16" Bolt. 1/32". Don’t just repair or replace worn components – bolster them with...
      Built to match or go beyond OE standardsDirect replacement
      $27.97
    • (0 reviews)
      # 83332510
      Saab 900 1980, Alignment Caster/Camber Shim by MOOG®. Upgrade your vehicle to MOOG and experience a safe and comfortable ride. The parts are made tough to ensure reliable operation even under extreme conditions. Thanks to the...
      Designed to make steering and suspension repairs easyDirect fit
      $4.18 - $9.74
    • (0 reviews)
      # 151405659
      Universal 5165 Series 46mm Smooth Body Monotube Shock Absorber by Bilstein®, 1 per Pack. Without Boot. Finish: Zinc Plated. Lower Mount: Eye 5/8". Get the benefits of a remote reservoir with BILSTEIN's universal fit 5165 shocks for...
      BILSTEIN’s industry leading monotube designRemote reservoir dramatically increases shock oil capacity for even greater heat dissipation and damping sensitivity
      $184.99 - $211.09
    • (0 reviews)
      # 151405660
      Universal 7100 Classic Series 46mm Smooth Body Monotube Shock Absorber by Bilstein®, 1 per Pack. Without Reservoir. The 7100 Classic Series are the most successful shock absorbers in off-road racing history. Since their inception...
      Monotube gas pressure constructionThreaded Body Lengths to 10" Travel
      $130.63 - $176.35
    • (0 reviews)
      # 151405661
      Universal 7100 Classic Series 46mm Threaded Body Monotube Coilover Shock Absorber by Bilstein®, 1 per Pack. Without Reservoir. Without Boot. Finish: Zinc Plated. Upper Mount: 1/2" Heim. Lower Mount: 1/2" Heim. The versatile 7100...
      Monotube gas pressure constructionSelf-Adjusting Deflecting Disc Valving
      $202.42 - $315.35
    • (0 reviews)
      # 151405662
      Universal 7100 Series 46mm Smooth Body Monotube Coilover Shock Absorber by Bilstein®, 1 per Pack. Without Boot. Finish: Electroless Nickel with Clear Powdercoat. Lower Mount: 1/2" Heim. The versatile 7100 Series shocks are designed...
      Monotube gas pressure constructionSelf-Adjusting Deflecting Disc Valving
      $169.94 - $279.34
    • (0 reviews)
      # 151405663
      Universal 8125 Series Shock Absorber by Bilstein®, 1 per Pack. Without Boot. Finish: Zinc Plated. With Screw Body Top. Upper Mount: 5/8" heim with 1/2" heim spacers (1.5" width spacing). Lower Mount: 5/8" heim with 1/2" heim...
      Threaded body with dual rate coilover hardwareMonotube design for fade-free performance
      $396.13 - $604.14
    • (0 reviews)
      # 151405664
      Universal 9100 Rock Crawler Series 46mm Threaded Body Monotube Coilover Shock Absorber by Bilstein®, 1 per Pack. With Reservoir. Without Boot. Finish: Electroless Nickel. With Screw Body Top. Upper Mount: 1/2" Heim. Lower Mount:...
      Monotube gas pressure constructionNickel plated 2" diameter threaded body
      $347.43 - $357.49
    • (0 reviews)
      # 151405665
      Universal 9100 Series Shock Absorber by Bilstein®, 1 per Pack. With Reservoir. Without Boot. Finish: Electroless Nickel. Compression/Rebound: Custom/Custom. Upper Mount: 1/2" Heim. Lower Mount: 1/2" Heim. BILSTEIN off-road racing...
      Monotube gas pressure constructionValving can be adjusted internally for rebound and compression.
      $366.93 - $843.81
    • (0 reviews)
      # 142045294
      Universal 9200 Series 70mm 4-Tube Bypass Monotube Shock Absorber by Bilstein®, 1 per Pack. With Reservoir. Without Boot. Finish: Zinc Plated. Compression/Rebound: Custom/Custom. Upper Mount: Eye 5/8". Lower Mount: Eye 5/8"....
      Available in 60mm*, 70mm* and 83mm* monotubes4-tube, position sensitive with adjustable rebound and compression
      $1,154.38 - $1,159.88
    • (0 reviews)
      # 151405669
      Universal 9300 Black Hawk Series 76mm 4-Tube Bypass Monotube Shock Absorber by Bilstein®, 1 per Pack. With Reservoir. Without Boot. Finish: Clear Anodized. With Screw Body Top. Compression/Rebound: Custom/Custom. Upper Mount: 3/4"...
      Monotube internal designOne piece 6061 extruded aluminum body with hard anodized finish
      $2,318.63 - $2,572.73
    • (0 reviews)
      # 151405671
      Universal AS2 Series 46mm Monotube Shock Absorber by Bilstein®, 1 per Pack. Without Boot. Finish: Clear Anodized. Upper Mount: 1/2" Heim. Lower Mount: 1/2" Heim. Combining versatility and high quality performance, the all new 46mm...
      46mm lightweight extruded aluminum body maintains tighter tolerances for superior performanceFine thread body provides precise adjustments in coilover applications (coilover kit sold separately)
      $254.09 - $270.30
    • (0 reviews)
      # 142045295
      Universal ASN Series 46mm Monotube Shock Absorber by Bilstein®, 1 per Pack. Without Boot. Finish: Clear Anodized. Upper Mount: Eye 12.7mm. Lower Mount: Eye 12.7mm. Designed for, but is not limited to, Modifieds, Late Models and...
      Monotube gas pressure constructionShock can be assembled and disassembled for rapid repair or valving change
      $245.85 - $254.52
    • (0 reviews)
      # 142045296
      Universal BGT Series 46mm Monotube Shock Absorber by Bilstein®, 1 per Pack. Without Boot. Finish: Clear Anodized. Compression/Rebound: Custom/Custom. Upper Mount: Eye 12.7mm. Lower Mount: Eye 12.7mm. Tthreaded aluminum body...
      Monotube gas pressure constructionAvailable with or without base valve
      $336.59 - $348.75
    • (0 reviews)
      # 151405672
      Universal CA4 Series 46mm Monotube Shock Absorber by Bilstein®, 1 per Pack. Without Boot. Finish: Polished Aluminum. Upper Mount: Eye 15.9mm. Lower Mount: Eye 15.9mm. Bilstein coilover shocks feature traditional bushing-style...
      Monotube gas pressure construction46mm working piston
      $241.31 - $293.03
    • (0 reviews)
      # 151405673
      Universal CA5 Series 46mm Monotube Shock Absorber by Bilstein®, 1 per Pack. Without Boot. Finish: Polished Aluminum. Upper Mount: 15.9mm Heim. Lower Mount: 15.9mm Heim. The Bilstein heim-mount coilover features race-style spherical...
      Monotube gas pressure construction46mm working piston
      $271.63 - $281.29
    • (0 reviews)
      # 151405674
      Universal G Series 36mm Monotube Shock Absorber by Bilstein®, 1 per Pack. Without Boot. Finish: Yellow Paint. Upper Mount: Eye 12.7mm. Lower Mount: Eye 12.7mm. Bilstein G Series Shock Absorbers are designed for, but not limited to,...
      Modified Lites and Dwarf CarsThe 36mm monotube steel body design
      $117.19 - $118.13
    • (0 reviews)
      # 151405675
      Universal M Series 36mm Monotube Shock Absorber by Bilstein®, 1 per Pack. Length: 21.89" Extended, 13.9" Collapsed. Without Boot. Finish: Yellow Paint. Upper Mount: Eye 12.7mm. Lower Mount: Eye 12.7mm. Bilstein M Series Shock...
      Designed for Stock Cars, IMCA/UMP Modified, Midgets, Mini-Sprints, Modified Lites and Dwarf CarsThe 36mm monotube steel body design
      $123.95 - $127.95
    • (0 reviews)
      # 142045297
      Universal SA4 Series 46mm Monotube Shock Absorber by Bilstein®, 1 per Pack. Without Boot. Finish: Polished Aluminum. Upper Mount: Eye 15.9mm. Lower Mount: Eye 15.9mm. Fully polished aluminum shock body with bushing style mounts....
      Monotube gas pressure construction46mm working piston
      $208.85
    • (0 reviews)
      # 151405688
      Universal SLS-M Series 46mm Monotube Shock Absorber by Bilstein®, 1 per Pack. Length: 23.52" Extended, 15.00" Collapsed. Without Boot. Sealed steel body shock, converts to coilover applications.
      Monotube gas pressure constructionPlated for durability and rapid heat dissipation
      $152.92
    • (0 reviews)
      # 151405687
      Universal SLS Series 46mm Monotube Shock Absorber by Bilstein®, 1 per Pack. Without Boot. Finish: Zinc Plated. Upper Mount: Eye 12.7mm. Lower Mount: Eye 12.7mm. Sealed steel body shock, converts to coilover applications.
      Monotube gas pressure constructionPlated for durability and rapid heat dissipation
      $152.92
    • (0 reviews)
      # 151405680
      Universal SL Series 46mm Monotube Shock Absorber by Bilstein®, 1 per Pack. Without Boot. Finish: Zinc Plated. Sealed steel body shock, converts to coilover applications.
      Monotube gas pressure constructionPlated for durability and rapid heat dissipation
      $120.80 - $178.93
    • (0 reviews)
      # 151405690
      Universal SN2 Series 46mm Monotube Shock Absorber by Bilstein®, 1 per Pack. Without Boot. Finish: Zinc Plated. Upper Mount: 1/2" Heim. Lower Mount: 1/2" Heim. Designed for applications requiring steel body shocks, the all new...
      46mm extruded modular steel body maintains tighter tolerances for superior performanceBody design allows for standard or coilover application
      $177.31 - $196.26
    • (0 reviews)
      # 151405691
      Universal SNS Series 46mm Monotube Shock Absorber by Bilstein®, 1 per Pack. Without Boot. Finish: Nickel Plated. Upper Mount: Eye 12.7mm. Lower Mount: Eye 12.7mm. Designed for, but is not limited to, Modifieds, Late Models and...
      Monotube internal designSN – aluminum billet cap
      $181.42 - $199.54
    • (0 reviews)
      # 151405689
      Universal SN Series 46mm Monotube Shock Absorber by Bilstein®, 1 per Pack. Without Boot. Finish: Nickel Plated. Designed for, but is not limited to, Modifieds, Late Models and Sprint Cars. 46mm (1.81”) diameter steel body,...
      Monotube internal designSN – aluminum billet cap
      $168.96 - $199.54
    • (0 reviews)
      # 151405693
      Universal SS4 Series 36mm Monotube Shock Absorber by Bilstein®, 1 per Pack. Without Boot. Finish: Chrome Plated. Compression/Rebound: 695/1310 at 0.52m/s. Upper Mount: Eye 11.2mm. Lower Mount: Eye 15.9mm. Bilstein Chrome shocks...
      Monotube gas pressure constructionDeflective disc valving and dropped solid axle specific mounts
      $119.49 - $148.45
    • (0 reviews)
      # 151405694
      Universal SZ Series 46mm Monotube Shock Absorber by Bilstein®, 1 per Pack. Without Boot. Finish: Zinc Plated. Sealed steel body shock, converts to coilover applications.
      Monotube gas pressure constructionPlated for durability and rapid heat dissipation
      $120.80 - $152.92
    • (0 reviews)
      # 151405696
      Universal XVA Series Double Adjustable 46mm Monotube Shock Absorber by Bilstein®, 1 per Pack. Without Boot. Finish: Clear Anodized. Compression/Rebound: Linear/Linear. Upper Mount: 1/2" Heim. Lower Mount: 1/2" Heim. Born from a...
      Monotube internal designDual Zone gas bulb results in decreased gas pressure ramp up while increasing grip levels
      $645.50 - $674.69
    • (0 reviews)
      # 151405699
      Universal XVS-S Series 46mm Monotube Shock Absorber by Bilstein®, 1 per Pack. With Schrader. Without Boot. Finish: Zinc Plated. Upper Mount: 1/2" Heim. Lower Mount: 1/2" Heim. Bilstein XVS Series Shock Absorbers are 46mm steel body...
      Monotube internal designExtreme volume nitrogen bulb
      $323.14 - $384.26
    • (0 reviews)
      # 151405697
      Universal XVS Series 46mm Monotube Front or Rear Shock Absorber by Bilstein®, 1 per Pack. Without Boot. Finish: Zinc Plated. Upper Mount: 1/2" Heim. Lower Mount: 1/2" Heim. BILSTEIN XVS Series Shock Absorbers are 46mm steel body...
      Monotube internal designExtreme volume nitrogen bulb
      $300.58 - $384.26
    • (0 reviews)
      # 96880639
      Universal 16 Series Aluminum Threaded Body Monotube Circle Track Shock Absorber by QA1®. The 16 Series shock is a threaded large body shock that is built to last at an affordable price. Adjust your gas pressure on-the-fly with the...
      2” O.D. hard anodized aluminum threaded monotube bodyLinear or digressive valving available
      $184.55 - $193.78
    • (0 reviews)
      # 96880801
      Universal 20 Series Sealed Monotube Circle Track Shock Absorber by QA1®. Mounting: Eyelet Bearing/Eyelet Bearing. Are you racing in a series that requires a sealed shock? QA1's 20 Series Sealed Monotube Shock is exactly what you...
      Monotube internal design2" O.D. one piece steel body
      $119.76
    • (0 reviews)
      # 78602466
      Universal 26 Series Steel Monotube Circle Track Shock Absorber by QA1®. Mounting: Eyelet Bearing/Eyelet Bearing. The 26 Series shock is a one piece monotube shock that is well suited for a variety of track conditions or as a...
      2" O.D. zinc plated steel monotube bodyAvailable with Hyperscrew, Sealed Hyperscrew (IMCA Lega) or Schrader Valve
      $134.14 - $156.86
    • (1 review)
      # 96881685
      Universal 28 Series Monotube Circle Track Shock Absorber with Expanded Gas Chamber by QA1®. Mounting: Eyelet Bearing/Eyelet Bearing. The 28 Series shock is an expanded gas chamber shock that performs well in various track...
      2" O.D. zinc plated steel monotube bodyExpanded gas chamber for increased feel, traction and performance
      $221.47 - $249.16
    • (0 reviews)
      # 96881959
      Universal 50 Series Steel Large Body Twin Tube Circle Track Shock Absorber by QA1®. Mounting: Eyelet Bearing/Eyelet Bearing. Piston: Digressive. The 50 Series features an in-house machined body with a larger inside diameter for...
      2 1/16" Steel twin tube bodyDeflective disc valving
      $110.17
    • (0 reviews)
      # 78602468
      Universal 51 Series Steel Large Body Twin Tube Circle Track Shock Absorber by QA1®. Mounting: Eyelet Bearing/Eyelet Bearing. Piston: Digressive. Introduced in 2013, QA1's 51 Series is an improved version of the popular 50 Series....
      2 1/16" Steel twin tube bodyDeflective disc valving
      $134.14 - $144.10
    • (0 reviews)
      # 96882094
      Universal 53 Series Stock Mount Steel Twin Tube Circle Track Shock Absorber by QA1®. Piston: Digressive. The new 53 Series is a stock mount twin tube shock absorber. Formerly the FC Series, this shock features hard-anodized...
      2 1/16" Steel twin tube bodyStock mount
      $134.14 - $138.40




    Guides & Articles

    • Off-Road Bumpers
      Skid Plates Provide The Ultimate In Off-Road Protection
      If you take your 4x4 off-roading, you have likely gained an appreciation of how unforgiving trails can be when it comes to your vehicle's underside. Deep ruts with rough edges can appear out of nowhere, sturdy-looking rocks can shift unexpectedly, and tranquil bodies of water can hide everything from sinkholes to fallen tree trunks. Before you know it, the underside of your truck has bounced off something hard enough to damage moving suspension components or puncture housings containing engine oil, gasoline, transmission fluid, or differential gear oil.
    • Performance Suspension Parts
      How much lift is needed for larger tires on my 2007-up Jeep Wrangler?
      Twenty years after the first Jeep Wrangler model debuted in 1987, third-generation Wranglers were introduced for the 2007 model year. Unlike any previous Wranglers or CJs, a 4-door Unlimited model (known internally as the "JKU" body) was offered alongside the standard 2-door ("JK" body). Because it took the off-road capability Wranglers are known for and broadened it with the practicality of 4 doors for those needing a family vehicle, third-generation Wranglers have proven very successful in the marketplace. Maintaining Jeep tradition, this Wrangler appeals by offering a higher-than-average number of advantages for the 4x4 enthusiast, whether it's used for rock crawling or as an everyday driver.
    • Performance Suspension Parts
      Coilovers Are Pricey - Why Would I Spend My Money For Them?
      When first glancing through the Performance Coilover Kits section of our website, you may be put off by some of the prices you see. After all, what are you buying other than a combo set of springs and shocks under some fancy name? Certainly, you ask yourself, can't you purchase springs and shocks separately and monetarily come out ahead?
    • Performance Suspension Parts
      Body Lifts & Suspension Lifts From 2 to 10 Inches | What are my Lift Kit Choices?
      Has this happened to you? You catch a glimpse of a truck like yours in a parking lot or around town that, for some reason, you like better than your own. It seems to have a stance that's more rugged-looking and more suited to a 4x4 than yours does. Maybe you get a chance to stop and take a closer look immediately, or maybe it's days or weeks before you see the other truck again.
    • Automotive Tools
      What Special Tools Are Available For Suspension Repair?
      Seasoned professional automotive technicians often say if you're using too much physical effort during a repair, you're simply not using the right tool. This is true, and a perfect example is repairing and replacing suspension components. If you've ever done this type of work or attempted to do it, you know it can be trickier than merely loosening and tightening bolts.
    • Performance Suspension Parts
      Coil, Leaf, & Torsion Bar | Describing The 3 Different Kinds of Springs
      The springs in your vehicle probably aren't something you think about until there's a problem or you've decided to upgrade suspension parts in the interest of sportier handling. But what specifically do springs do? In short, they play a major role in the safe handling and ride comfort of your vehicle. Not only do they keep a vehicle at a designated standing height, they provide recoil necessary to bounce back after suspension components move up and down over uneven road surfaces. By themselves, springs will continue to bounce up and down for a long time unless a motion damper such as a shock absorber is present to keep things stable. Springs can be soft and extremely bouncy, or they can be stiffer and less bounce-prone.
    • Performance Suspension Parts
      How Do Shock Absorbers Work?
      Shock absorbers (also known as "shocks") are the suspension components which slow, then stop, the up-and-down bouncing movement of your vehicle's springs through a process known as dampening. Without shocks to calm things down, springs will continue to extend and release energy they absorb from bumps in the road at an uncontrolled rate - bouncing for a long time until their kinetic energy finally dissipates. Needless to say, this would produce an extremely bouncy ride that would be hard to control over uneven road surfaces.
    • Performance Transmission Parts
      Suspension Enhancements Will Raise The Rear Of Your Tow Vehicle
      If you are using your "daily driver" car or truck for occasional towing duty, you are looking for that ideal sweet spot where the weekday commute is comfortable and quiet, and the weekend trailering feels solid and secure. In other words, you don't want to vehicle to feel too "stiff" during the week, nor do you want it to ride "soft" when pulling a trailer.
    • Wheels & Rims
      Stanced Wheels, Demon Camber | How Do I Get That Look?
      Stanced. Demon camber. You may know it as oni-camber. You've seen the look, and whether you like it or not is totally beside the point. The great thing about this stanced look is that it gets your attention. From the interviews we've read with owners and drivers of these machines, that is exactly what they are after. They've said that it's all about being noticed.
    • Performance Suspension Parts
      Stock vs Performance Suspension
      Very often we don't even realize what a crucial role a car's suspension plays in providing a safe and comfortable ride. The system maximizes the friction between the road surface and your vehicle's tires, ensuring steering stability along with responsive handling.
    • Performance Suspension Parts
      Shocks Versus Struts: The Big Answers Revealed!
      Shock absorbers, also known simply as “shocks” (which is what we will call them for the rest of this article), are the suspension components which stop your car or truck from bouncing up and down after hitting a bump. They are a major contributor to your ride comfort and safety.
    • Replacement Suspension Parts
      How to Inspect Your Suspension System
      The very first thing to know about timely suspension system diagnosis is that the stability and steering control of your vehicle and, what is more important, your safety on the road depends on how often you make it. Automotive suspension belongs to one of those car systems that are constantly exposed to high loads and thus are prone to wear and tear. Most specialists recommend inspecting suspension system after every 6,500-7,500 miles or when there are any signs of its breakage.
    • Performance Suspension Parts
      How Low Can You Go?
      Lowering is high on the list of many people who want to improve the appearance of their car. If you want to lower your car with the coil springs, then replacing them with lowering springs is the way to go. But what if you want to lower your car and also make it handle better? If that’s your goal then consider coil-over shocks.

    Popular Products

    1980 Saab 900 Performance Suspension Reviews

    Average rating:  5  5 - 10 reviews
    4.8 of 5
    Good Product
    I needed new shocks for my car so I bought QA1 28 series shock absorber. Durable construction, great looks and perfect fit. My car now handles much better without any sacrifice to ride quality.
    JPosted by John (Troy, MI) /
    Was this review helpful for you? Yes
    View More
    Related 1980 Saab 900 Pages
    1980 Saab 900 Models
    SECURE SHOPPING

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
    It is neither inferred nor implied that any item sold by CARiD.com, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.