1980 Ford Mustang Performance Suspension

1 - 60 of 80page 1 of 2
show: 
sort by: 
view: 
    • (0 reviews)
      $2,709.38$2,167.50
      Ford Mustang 1980, Variant 1 Coilover Lowering Kit by Belltech®. With 1.4"-2.5" Front and 0.9"-2.1" Rear Body Drop. Variation 1 coilovers take the worry and guesswork out of adjusting the damper settings when you drop the ride...
      Set of 4 coilovers that achieve the best balance between sport handling, comfort, and safetyDamper settings have been optimally pre-set by KW Engineers and are not adjustable
      # 14441190
    • (0 reviews)
      $2,093.03$1,674.42
      Ford Mustang 1980, Coilover Lowering Kit by ST Suspensions®. This is a set of front and rear twin-tube coilovers with adjustable ride height created for the enthusiast who appreciates performance street driving. One adjustment knob...
      Set of 4 complete coilover assemblies for the front and rear of your vehicleDesigned for a higher level of ride comfort, retaining a comfortable spring rate with effective harmonic damping
      # 12524270
    • (0 reviews)
      $195.00$156.00
      Ford Mustang 1980, Lowering Kit with 2" Front and Rear Body Drop by KSport®. This is a set of 4 replacement front and rear coil springs designed with a progressive coil rate for the enthusiast who seeks to lower their vehicle and...
      Set of 4 replacement coil springs designed to provide noticeable ride height drop on your vehicleProgressive spring rate retains civilized ride comfort during everyday driving conditions
      # 14873902
    • (0 reviews)
      $42.75from $34.20 - $970.39
      Ford Mustang 1980, Lowering Kit by Belltech®. Includes: Rear Anti-Sway Bar, Rear Lowering Spring Kit, Front Anti-Sway Bar, Front Lowering Spring Kit. Belltech lowering kits give your vehicle an aggressive look while retaining...
      Belltech lowering kits give your vehicle an aggressive look while retaining factory ride quality2” drop kits include Drop Ball Joint, Drop Spindle, Rear Aluminum Lowering Blocks, and Rear Shackles
      # 14426751
    • (0 reviews)
      $318.74$254.99
      Ford Mustang 1980, Sport Tech Lowering Kit by ST Suspensions®. ST Suspensions offers front and rear Sport Tech line springs and shocks designed for the enthusiast who seeks to lower their vehicle to a moderate extent and achieve...
      Sport Tech line products are designed for the enthusiast who seeks to lower their vehicle to a moderate extentSpring and shock sets are sold together or separately
      # 12526168
    • (0 reviews)
      $163.63from $130.90 - $148.75
      Ford Mustang 1980, Coil Springs by ST Suspensions®. This is a set of coil springs designed for achieve handling improvements in cornering, grip, and turn-in response. Stiffer yet progressive spring rate provides a civilized ride...
      Set of 2 coil springsStiffer-than-OEM spring rate reduces body roll, nose dive, and rear squat for improved handling
      # 12527499
    • (0 reviews)
      $287.49$229.99
      Ford Mustang 1980, Gripp™ Performance Lowering Spring System by BBK Performance®. Lower your car approximately 1 ½” while maintaining good ride quality with these performance lowering springs. Utilizing progressive rate...
      # 42620794
    • (0 reviews)
      $257.54from $206.03 - $390.73
      Ford Mustang 1980, Lowering Kits by Lakewood®. 1 Pair. When you need to get reliable components to bring your vehicle's suspension or chassis back to life, there's no better place to get them than right here. Whether you need bell...
      Engineered to exceed OEM quality standardsImproves your vehicle's handling
      # 13363788
    • (0 reviews)
      $85.53$68.42
      Ford Mustang for Towing Hauling 1980, Sensa-Trac™ Rear Load Adjusting Shock by Monroe®, 1 set. Length: 12.625" Compressed, 20.375" Extended with 7.75" Stroke. Upper Mount: Stem Mount - 2.375" Stem Length x 0.375"-16 Thread Pitch....
      Improves ride and handling and helps maintain ride height when additional weight is loadedAll Weather Fluid reduces friction for smooth piston rod action
      # 17929165
    • (0 reviews)
      $74.08$59.26
      Ford Mustang for Towing Hauling 1980, Max-Air® Rear Air Adjustable Shocks by Monroe®, 1 set. Length: 12.375" Compressed, 20.5" Extended with 8.125" Stroke. Upper Mount: Stem Mount - 2.375" Stem Length x 0.375"-16 Thread Pitch....
      Provide proper vehicle ride height when additional weight is loadedInflates up to 150 psi
      # 17929362
    • (0 reviews)
      $97.50from $78.00 - $178.00
      Ford Mustang 1980, Special D Shocks by KONI®, 1 per Pack. The Koni special, or original damper, is designed for the driver who wants to improve their cars handling and safety. Improved road holding with a higher level of safety,...
      Improves ride/ handling performanceRed Finish
      # 16476682
    • (0 reviews)
      $97.16$77.73
      Ford Mustang 1980, AGX™ Rear Shock Absorber by KYB®, 1 per Pack. Whether you simply drive in town or prefer a firm, aggressive ride all the time, AGX Shocks and Struts by KYB are a great choice. These twin-tube hydraulic gas...
      Designed for handling precision and ride composureExternally adjustable without lifting the vehicle or removing the tires
      # 17797776
    • (0 reviews)
      $262.49$209.99
      Ford Mustang Ghia 1980, Aluminum Front Caster / Camber Plate Package by BBK Performance®. These adjustable plates install in place of the stock strut mounts and allow the alignment to be properly set, even on lowered vehicles. CNC...
      # 10961326
    • (0 reviews)
      $86.19from $68.95 - $169.97
      Ford Mustang 1980, Shocks and Struts by Lakewood®. 1 Piece. When you need to get reliable components to bring your vehicle's suspension or chassis back to life, there's no better place to get them than right here. Whether you need...
      Engineered to exceed OEM quality standardsImproves your vehicle's handling
      # 13364881
    • (0 reviews)
      $29.10from $23.28 - $48.10
      Ford Mustang 1980, Sensa-Trac™ Shocks and Struts by Monroe®. 1 per Pack. These shock absorbers are designed to adjust to changing road conditions providing improved control and performance. Monroe offers Twin tube shocks, struts...
      Provide the correct level of suspension damping for the particular surface and weightTwin-tube or monotube design
      # 17911744
    • (0 reviews)
      $23.36from $18.69 - $39.13
      Ford Mustang 1980, Monro-Matic Plus™ Shocks and Struts by Monroe®. 1 per Pack. Nitrogen gas charged Monro-Matic Plus shocks and struts feature VPV (velocity proportional valving) and innovative all weather fluid. They offer...
      An ideal balance of comfort and control for any driving conditionImproved ride at an economical price
      # 17924045
    • (0 reviews)
      $23.25from $18.60 - $19.06
      Ford Mustang 1980, Rear Upper or Lower Coil Spring Isolators by Energy Suspension®. With Stock Height. This is a set of cushioning spring pads designed to be used either on top of or below a rear coil spring. Use both pads to...
      Set of spring pads that can be used at the top or bottom of rear coil springsUse both pads to insulate the top and bottoms of one spring, or spread them out between left and right sides if you only need coverage on the spring bottoms
      # 40014327
    • (0 reviews)
      $24.99from $19.99 - $29.99
      Ford Mustang Ghia 1980, Gripp™ Polyurethane Coil Spring Isolators by BBK Performance®. Rubber spring isolators typically wear from age and exposure to chemicals and the elements. When upgrading to lowering springs, replace them...
      # 10959324
    • (0 reviews)
      $229.33from $183.46 - $453.15
      Ford Mustang 1980, Extreme Sport TVS Lowering Kit by Hotchkis®. This is a complete kit containing upper and lower trailing arms, adjustable mount braces, and hardware designed to eliminate flex which allows rear axle to shift...
      Complete kit containing upper and lower trailing arms, adjustable mount braces, and hardwarePrevents the axle assembly from shifting out of alignment during high torque conditions
      # 45115772
    • (0 reviews)
      $149.99from $119.99 - $299.99
      Ford Mustang Ghia 1980, Gripp™ Control Arm Kit by BBK Performance®. Now available from BBK, this fantastic kit provides firmer launches and much improved handling characteristics. Stiff boxed steel construction and firm...
      # 10959356
    • (0 reviews)
      $207.00from $165.60 - $235.14
      Ford Mustang 1980, Street Performance Sway Bar by Hellwig®. Hellwig offers front sway bars designed for lowered trucks or other performance-oriented vehicles. Effectively reduces side-to-side body roll around turns, enhances tire...
      Front sway bar sets are designed for lowered trucks or other performance-oriented vehiclesReduces side-to-side body roll around turns, enhances tire grip, and restores full vehicle control
      # 45065017
    • (0 reviews)
      $274.40$219.52
      Ford Mustang 1980, Caster Camber Plate by Hotchkis®. Includes: Special Strut Boots, Bump Stops, Hardware and Instructions. This is a set of 2 replacement plates for the top of your MacPherson type struts that allow a more extreme...
      Set of 2 replacement plates for the top of your MacPherson type strutsAllows a more extreme level of adjustment for camber and caster than cam bolts do
      # 4665282
    • (0 reviews)
      $218.75$175.00
      Ford Mustang Base 1980, Front Tracker Tie Rod Ends by Baer®. 121.92mm (4.80") Sleeve Length. Suspension Components. Baer Front Tracker Tie Rod End pieces are designed to restore steering and ride stability that may be lost during...
      # 10641544
    • (0 reviews)
      $341.24from $272.99 - $355.41
      Ford Mustang 1980, Traction Action™ Lift Bars by Lakewood®. When you need to get reliable components to bring your vehicle's suspension or chassis back to life, there's no better place to get them than right here. Whether you...
      Engineered to exceed OEM quality standardsImproves your vehicle's handling
      # 13363495
    • (0 reviews)
      $40.48from $32.38 - $79.75
      Ford Mustang 1980, Control Arm Bushings by Energy Suspension®. Energy Suspension lets you upgrade worn and crumbling rubber bushings that dampen vibrations at mounting points for front upper and lower control arms, rear upper and...
      See Product Options for replacement bushing kits for lower and upper control arms, torsion arms, trailing arms, and track armsHigh-density polyurethane construction provides a superior cushioning effect and resists drying up and crumbling the way rubber mounts can
      # 40011230
    • (0 reviews)
      $20.83$16.66
      Ford Mustang 1980, Front Sway Bar End Links by Energy Suspension®. 4.5" A-Length. This is a set of 2 assembled front sway bar end links, complete with polyurethane bushings included. Resilient polyurethane offers greater resistance...
      Set of 2 assembled front sway bar end links, complete with polyurethane bushings includedSway bar end links connect the sway bar to the vehicle’s suspension arm to dampen noise, vibrations, and harshness
      # 11093983
    • (0 reviews)
      $15.14from $12.11 - $19.74
      Ford Mustang 1980, Front Sway Bar Bushings by Energy Suspension®. This is a set of 2 replacement polyurethane bushings designed to exceed factory OEM levels of vibration dampening and support at the points where your front sway bar...
      Set of 2 replacement polyurethane sway bar center bushings (designed for front applications) that meet or exceed OEM levels of vibration dampening refinementThis is a set of front bushings only, and does not include outer steel sleeves for mounting
      # 11082525
    • (0 reviews)
      $4.14$3.31
      Ford Mustang 1980, Tie Rod and Ball Joint Boots by Energy Suspension®. Energy Suspension offers replacement dust boots for torsion bars, tie rod ends, and ball joints to prevent oil based contaminants and other unwanted corrosive...
      Dust boot sets are available for left/right-side ball joints, inner tie rod ends, and torsion barsReplace worn or damaged boots without having to buy an entire new part from the vehicle manufacturer
      # 11089032
    • (0 reviews)
      $16.24$12.99
      Ford Mustang 5.0L 1980, Gripp™ Control Arm Bushing Kit by BBK Performance®. These are replacement bushings for BBK Heavy-Duty Performance Rear Control Arms. Like the originals they’re made from rugged, durable polyurethane,...
      # 10961349
    • (0 reviews)
      $49.99$39.99
      Ford Mustang Ghia 4.2L 1980, Gripp™ Control Arm Bushing Kit Rear by BBK Performance®. These are replacement bushings for BBK Heavy-Duty Performance Rear Control Arms. Like the originals they’re made from rugged, durable...
      # 10961354
    • (0 reviews)
      $18.74$14.99
      Ford Mustang Ghia 1980, Polyurethane Axle Bump Stop Rear by BBK Performance®. Restore the relationship between the rear axle and snubber bushing on a lowered vehicle with this polyurethane snubber bushing. These bushings are...
      # 10961341
    • (0 reviews)
      $137.49from $109.99 - $149.99
      Ford Mustang Ghia 1980, Gripp™ Subframe Connector Kit by BBK Performance®. Take the flex out of your unibody Mustang by installing these subframe connectors. These super strong box frame connectors tie the front and rear...
      # 10960397
    • (0 reviews)
      $19.91$15.93
      Ford Mustang 1980, Strut-Mate™ Front Strut Boot Kit by Monroe®, 1 per Pack. Body Length: 2". The boot kit is designed to protect the strut piston rod from stones, mud, water, sand, and other abrasives providing longer service...
      Protects the piston rod from corrosion, dirt, moisture and impact.Prolongs strut service life
      # 17930177
    • (0 reviews)
      $265.54from $212.43 - $394.99
      Ford Mustang 1980, LoadController™ Air Compressor Systems by Air Lift®. LoadController systems are air compressors that mount permanently on the frame of your vehicle to give you spring inflation pressure wherever you go....
      Dual-path design compressors allow left- or right-side springs on the same axle to be controlled independently of each otherHeavy-duty strength compressors are recommended for daily or commercial use, run quieter, and provide better filtration
      # 9819532
    • (0 reviews)
      $122.44$97.95
      Ford Mustang 1980, Load Support Air Springs by Air Lift®. Load Support Air Springs are sets of two adjustable secondary air springs that help existing springs maintain a level ride, proper handling, and safety when weighed down by...
      Set of two air bag spring supports designed to work with factory OEM springsPrevents vehicle’s main springs from sagging due to constant load compression
      # 9812658
    • (0 reviews)
      $612.50from $490.00 - $599.99
      Ford Mustang 1980, QuickSHOT™ Compressor System by Air Lift®. This kit contains an air compressor, lines, hardware, and a 2-gallon auxiliary tank that stores compressed air for faster inflation of springs that raise ride height....
      2-gallon auxiliary tank stores compressed air for faster inflation of air springsTank can be used with single or dual front/rear Air Lift applications
      # 9805330
    • (0 reviews)
      $437.50from $350.00 - $499.99
      Ford Mustang 1980, Wireless Control System by Air Lift®. These kits include a compact wireless remote control and all the equipment you need to adjust the pressure in two air springs on the same axle. Choose the value-priced Equal...
      Equal Air Spring Inflation kit contains a standard air compressor that adjusts left and right springs together at the same time to the same pressureSeparate Air Spring Inflation kit contains a heavy duty air compressor with separate lines that allows individual adjustment of left and right springs
      # 9807932
    • (0 reviews)
      $130.81$104.65
      Ford Mustang 1980, Suspension Load Leveling Kit by Firestone®. Coil-Rite®; Air Helper Spring Kit; Rear; Incl. Air Helper Springs; Supports; Hardware; Air Line; And Inflation Valves; No Drilling Required; OEM Number W237604103.
      # 13325164
    • (0 reviews)
      $340.83from $272.66 - $383.43
      Ford Mustang 1980, Suspension Air Compressor Kit by Firestone®. Standard Duty Air Compressor System.
      # 13328505
    • (0 reviews)
      $32.38$25.90
      Ford Mustang 1980, Excel-G™ Rear Shock Absorber by KYB®, 1 per Pack. Restore your vehicle's original performance for normal driving conditions with this twin-tube gas hydraulic shock that offers additional damping force to...
      Designed to restore original handling and controlCalibrated to compensate for age and miles driven
      # 17797775
    • (0 reviews)
      $19.19$15.35
      Ford Mustang 1980, Front Strut Bellow by KYB®, 1 per Pack. These bellows provide effective protection from dirt and moisture by covering the entire piston rod of KYB struts. The bellows are made of resilient accordion-pleat rubber...
      Keep leak-causing contaminants away from polished strut shaftProtect upper seal and bushing
      # 17797778
    • (0 reviews)
      $38.18$30.54
      Ford Mustang 1980, Gas-a-Just™ Rear Shock Absorber by KYB®, 1 per Pack. Go with Gas-a-Just shocks and struts and experience greater stability, handling, and control over twin-tube designs. Whether your vehicle is originally...
      Replacement for an OE monotube shock to restore/keep the vehicle's original performance characteristicsIdeal as an upgrade from an OE twin-tube for quicker, more responsive handling and control
      # 17797777
    • (0 reviews)
      $57.59from $46.07 - $61.05
      Ford Mustang 1980, Coil Spring Set by MOOG®. Upgrade your vehicle to MOOG coil springs that are designed to restore the original handling, reduce body sway and bring ride height to OE specifications. These coil springs ensure a...
      Direct fit, with no modificationsRestores and retains proper handling
      # 21678174
    • (0 reviews)
      $23.78from $19.02 - $25.32
      Ford Mustang 1980, Control Arm Bushing Kit by MOOG®. Replace your worn or damaged bushings with stronger and longer-lasting bushings from MOOG that effectively absorb substantial loads and are less prone to splitting or cracking...
      Restore handling and enable proper alignmentReduce noise
      # 21678161
    • (0 reviews)
      $49.56$39.65
      Ford Mustang 1980, Front Lower Ball Joint by MOOG®. This is an aftermarket part that replaces factory OE # E6242. Includes Powdered-Metal Gusher Bearing to Allow Grease to Penetrate Bearing Surfaces. Greasable: Greasable. Mount...
      Engineered to retain socket torque and smooth articulation over the life of the part, to maintain tight steering feelExclusive powdered-metal bearing design allows grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
      # 21644512
    • (0 reviews)
      $12.70$10.16
      Ford Mustang 1980, Front Lower Strut Mount Alignment Camber Bolt Kit by MOOG®. Axis Cam/Bolt Kit - Adjustment Range from -1-3/4 to 1-3/4 Degree. 16mm Bolts. Upgrade your vehicle to MOOG and experience a safe and comfortable ride....
      Designed to make steering and suspension repairs easyDirect fit
      # 21644017
    • (0 reviews)
      $15.99$12.79
      Ford Mustang 1980, Front Lower Strut Mount Alignment Camber Wedge Kit by MOOG®. Adjustable. Adjustment Range -1.5 to 1.5 Degree of Camber. Includes 2 wedges, 2 Bolts and nuts. Upgrade your vehicle to MOOG and experience a safe and...
      Designed to make steering and suspension repairs easyDirect fit
      # 21644170
    • (0 reviews)
      $15.56$12.45
      Ford Mustang 1980, Front Shock / Strut Bellow by MOOG®. Includes Bumper. Upgrade your vehicle to MOOG and experience a safe and comfortable ride. The parts are made tough to ensure reliable operation even under extreme conditions....
      Designed to make steering and suspension repairs easyDirect fit
      # 21646792
    • (0 reviews)
      $7.15from $5.72 - $7.74
      Ford Mustang 1980, Front to Frame Sway Bar Bushing Kit by MOOG®. Replace your worn or damaged bushings with stronger and longer-lasting bushings from MOOG that effectively absorb substantial loads and are less prone to splitting or...
      Restore handling and enable proper alignmentReduce noise
      # 21678165
    • (0 reviews)
      $6.13$4.90
      Ford Mustang 1980, Front Sway Bar Link Kit by MOOG®. This is an aftermarket part that replaces factory OE # D8BZ5A486A. Standard Design. If you hear noise and are experiencing excessive body roll, you may be in need of sway bar...
      Socket style links feature superior metal bearingsGreasable design for longer life and smooth operation on socket style links
      # 21649098
    • (0 reviews)
      $21.60from $17.28 - $23.14
      Ford Mustang 1980, Control Arm by Mevotech®. Put back the quality performance of your control arm by simply replacing its broken bushings. With only minimal transmission to the passenger cabin, the bushings will absorb vibration...
      Isolate or minimize transmitted noise, road shock, and vibrationAllow your suspension to twist and move in response to the varying road conditions
      # 19190090
    • (0 reviews)
      $15.09from $12.07 - $17.50
      Ford Mustang 1980, Front Lower Ball Joint by Mevotech®. Experience improved ride comfort and smooth handling with the replacement Mevotech ball joints. They grip the control arm better and guarantee worry-free performance even...
      Includes durable higher and lower metal bearings for a smoother and quiet handlingKnurling on the outer housing of the ball joint makes for a better grip with the control arm
      # 19201111
    • (0 reviews)
      $22.23$17.78
      Ford Mustang 1980, Front Strut Bumper by Mevotech®, Use 2 per Car. Quality: Premier Line. Don’t just repair or replace worn components – bolster them with Mevotech parts. Put through rigorous testing that goes above and beyond...
      Built to match or go beyond OE standardsDirect replacement
      # 19265953
    • (0 reviews)
      $7.70from $6.16 - $11.82
      Ford Mustang 1980, Front Sway Bar Component by Mevotech®. Upgrade to the sway bar link kit by Mevotech and keep your vehicle stable, enjoying a more comfortable ride and better road handling. All parts are made tough to ensure...
      Designed to improve the vehicle's cornering stabilityDirect fit OE replacement
      # 19211216
    • (0 reviews)
      $23.44$18.75
      Ford Mustang 1980, Suspension Air Compressor Isolator by Suncore®. Suspension Air Compressor Isolator; For Vehicles w/Air Suspension Compressor; For Buick/Cadillac/Olds/Pontiac/Ford/Lincoln/Mercury.
      # 14251627
    • (0 reviews)
      $212.49$169.99
      Ford Mustang 1980, Gripp™ Anodized Billet Aluminum Heavy Duty Performance Front Bump Steer Upgrade Kit by BBK Performance®. These heavy-duty heim-jointed tie-rod ends will upgrade your steering rack and are a must to eliminate...
      # 10961337
    • (0 reviews)
      $14.14from $11.31 - $11.59
      Ford Mustang 1980, Rack and Pinion Bushings by Energy Suspension®. This is a set of 2 round polyurethane bushings that keep rack and pinion steering assemblies properly aligned to allow smooth movement and absorb noise, vibration,...
      Set of 2 round polyurethane bushings that keep rack and pinion steering assemblies properly aligned at the mounting points to allow smooth movement and absorb noise, vibration, and harshnessZinc-plated steel center shaft included
      # 40016513
    • (0 reviews)
      $4,499.99from $3,599.99 - $4,749.99
      Universal Hydraulic Individual Lift System by KW Suspensions®. This is a set of 4 hydraulic cylinder units that mount between the spring perch and spring on KW coilovers. These expand to provide 1.8 inches of front and rear lift...
      Hydraulic lift cylinders (located on the coilover body between spring perch and spring) expand to provide 1.8 inches of front and rear vehicle liftAvailable in 4-wheel front and rear, or front-only applications
      # 11472927
    • (0 reviews)
      $7.68from $6.14 - $7.68
      Universal Shock Reservoir Isolator by Energy Suspension®. This is a set of polyurethane vibration dampeners that insert between externally mounted shock absorber fluid reservoirs and shocks for off-road applications. Resilient...
      Set of polyurethane vibration dampeners that insert between externally mounted shock absorber reservoirs and shocks for off-road applicationsHigh-density polyurethane provides a superior cushioning effect and resists degrading, drying up, and crumbling the way rubber mounts can
      # 10780487
    • (0 reviews)
      $18.74from $14.99 - $26.99
      Universal Shock and Steering Stabilizer Armor by Daystar®. Surround and protect your shock absorbers, steering stabilizers, or any other tubular underbody pieces from damage and grime discoloration with this set of two polyurethane...
      Set of two snap on cover pieces designed to protect front or rear shocks from dents and damageCan also be used to effectively protect steering stabilizers
      # 4301575



    Guides & Articles
    Very often we don't even realize what a crucial role a car's suspension plays in providing a safe and comfortable ride. The system maximizes the friction between the road surface and your vehicle's tires, ensuring steering stability along with responsive handling.
    Shock absorbers, also known simply as “shocks” (which is what we will call them for the rest of this article), are the suspension components which stop your car or truck from bouncing up and down after hitting a bump. They are a major contributor to your ride comfort and safety.
    The very first thing to know about timely suspension system diagnosis is that the stability and steering control of your vehicle and, what is more important, your safety on the road depends on how often you make it. Automotive suspension belongs to one of those car systems that are constantly exposed to high loads and thus are prone to wear and tear. Most...