Dodge Charger 6.6L 1975-1978, 240 Series Stainless Steel Heavy Duty Oval Catalytic Converter by FlowmasterŽ, 2.25" Inlet / 2.25" Outlet, 16.5" Length. The new Flowmaster replacement catalytic converters are made to meet and exceed all federal environmental regulations and, as all Flowmaster products, to deliver the best possible performance. The shells are made of stainless steel, and the catalytic components meet or exceed the legal requirements.
Note: Flowmaster Replacement Catalytic Converters are not available for sale or use on vehicles registered in or operated in the state of California.
- Exceed all federal emission standards
- Stainless Steel shells
- High load of noble metals in substrate for reliable performance
- Efficient gas flow
- 25000 mile emission compliance warranty on internal components
- 50000 mile/5 year warranty on exterior casings
Flowmaster, the masters of performance mufflers and exhaust systems since 30 years, have decided to also offer street legal, high quality, replacement catalytic converters to the market. The catalytic converters are engineered for long life and reliable performance. When you install a Flowmaster Catalytic Converter you avoid the irritation that low quality converters can cause by frequently lighting up the MIL symbol on your dash, requiring equally frequent service appointments to check the codes and make the relevant adjustments. The Flowmaster converters are engineered and built in the U.S.A., using only first grade materials, to the high quality standard required to get the Flowmaster trademark stamped into the casing.
The outer shells are made in stainless steel of the highest automotive grade. The interiors of the converters feature strata that carry catalytic substrates with high loads of noble metals, making sure that the converters perform to exceed the USEPA standards. The strata themselves are of OEM or higher quality, ensuring that they last and can endure the vibrations and stress even in hard driving conditions. As Flowmaster is the master of gas flow, you can also rest assured that the exhaust gases flow through the converters with minimum possible restrictions for maximum possible performance. If and when you need to replace your catalytic converter, get a converter with the Flowmaster stamp. There is no better.95.08Brand: Flowmaster Part Number: 2400224 UPC: 700042026647
FlowmasterŽ has its roots in solving the engine noise problems encountered by California racers in the 1980s. In 1983 Flowmasters founder, Ray Flugger, created his first patented design of racing silencers, which dampened noise with minimal loss of power. Ray attached handles to ease carrying the square shaped race mufflers through the race pits, and the mufflers became known as the "suitcase mufflers." Today, the innovative Flowmaster mufflers are the result of years of development with top race engine builders, thousands of hours of dyno research and "real-world" on-track testing.FlowmasterŽ - 240 Series Stainless Steel Heavy Duty Oval Catalytic Converter Reviews (10)
Every Customer can leave a review about our service and the product that was purchased. In order to leave your review for your new product, please follow the link in the email you receive after completing your purchase. You can rate appearance, ease of installation, price/value and product quality.Customers' rating: 4.5 OF 5APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(4)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYSinging the Converter Blues| Posted by Richard H. C. | 2009 Dodge Charger (Acton, MA)
I had a mechanic install these for me the other day. And they seem to work very well. There is a smell but that is expected. To replace these with OEM parts was going to be about $1,200 bucks. I was charged $150 to have them put on! So, for half the price and installed, I think that was a good deal! Thank you, CARiD!Was this review helpful for you? YesNo(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYCatalytic Converter| Posted by Richard H. C. | 2009 Dodge Charger (Acton, MA)
I had a mechanic install these for me the other day. And they seem to work very well. There is a smell but that is expected. To replace these with OEM parts was going to be about $1,200 bucks. I was charged $150 to have them put on! So for half the price and installed, I think that was a good deal! Thank you, CARiD!Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(4)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYFlowmaster American Thunder| Posted by Enmin T. | 2011 Dodge Charger (Ft Hood, TX)
I bought this for my 2011 Charger RT. Installation was super easy. Sounds great, I feel a difference in performance and I got a 2 MPG increase. Overall, I give it 4/5.Was this review helpful for you? YesNo(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(4.5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYWakes the Car Up| Posted by Timothy H. | 2011 Dodge Charger (Cleveland, TX)
Great product and sound, really wakes the car and neighbor hood up. Has some pretty bad drone in the car at 2,000 RPM and steady at 50 MPH but for us this is not a daily driver so I love it. I've had people stopping me in parking lots to find out what kind of exhaust I had because they loved the way it sounded. If it's your daily driver, I would go for the 50 series flows instead of the 40 series but if you want to turn heads go for this kit. Also at 60-70 MPH it really quiets out so a long trip isn't a problem unless speed limit is 50 the whole way.Was this review helpful for you? YesNo(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITY(5)APPEARANCEEASE OF INSTALLATIONPRICE/VALUEQUALITYFlowmasterŽ - Force II Kit| Posted by Henry G. | 2010 Dodge Charger (Windsor, ON)
After searching the web CarID had about the best prices that I could find for the exhaust system that I needed for my 2010 Dodge Charger. I installed the system myself and if you have some experience on cars it shouldn't be too hard for you to do as well. The sound that the exhaust produces is just enough to give you that nice little rubble, and it's not too overly loud inside the car. The only thing that I didn't like about the purchase was that Canada Customs charged me an additional $152.00 USD to clear Customs. That is to be expected cause Customs always wants their share too. I will be back shopping at CarID again soon for a set of rims as they also have a hugh sellection to choose from.Was this review helpful for you? YesNo
FlowmasterŽ - 240 Series Stainless Steel Heavy Duty Oval Catalytic Converter Reviews (10)View more 10 All Flowmaster Exhaust Systems reviews >>