1977 Ford Mustang Performance Suspension

Change Vehicle
1 - 60 of 151 results
show:
sort by:
    • (0 reviews)
      # 96887759
      Ford Mustang 1977, Front Pro Coil Shock Absorber System by QA1®. Spring Length: 8". QA1’s Pro Coil Systems are a 100% bolt-in coil-over shock conversions without the hassles. Choose from double adjustable, single adjustable, drag...
      Twin-Tube internal designMade in the U.S.A.
      $354.95 - $598.98
    • (0 reviews)
      # 81788814
      Ford Mustang II 1977, Front CoolRide Kit by RideTech®. Includes: air springs, brackets, & hardware. The CoolRide system will raise and lower the vehicle, improving the handling and offering a terrific ride.
      Pre-engineered mounting hardwareMaintains driveline angles, tire clearance, and load capacities
      $300.00 - $400.00
    • (0 reviews)
      # 17163271
      Ford Mustang II 1977, B6 Series Heavy Duty 36mm Monotube Front Driver or Passenger Side Shock Absorber for Stock Height Vehicles by Bilstein®, 1 per Pack. Without Boot. Finish: Black Paint. Upper Mount: Stem. Lower Mount: Eye...
      Increased power reserves and service life, even when pulling transporters and trailers or during frequent journeys with loadsOptimum adhesion and enhanced lane change stability in both day to day and extreme situations
      $93.25
    • (0 reviews)
      # 17929361
      Ford Mustang II For Towing Hauling 1977, Max-Air™ Rear Load Adjusting Shock Absorbers by Monroe®. Quantity: 2 per Pack. Length: 10.25" Compressed, 16.375" Extended with 6.125" Stroke. With Rubber Dust Shield. Without Extended...
      Monotube, Air Adjustable internal designProvide proper vehicle ride height when additional weight is loaded
      $65.39
    • (0 reviews)
      # 36081675
      Ford Mustang II 1977, Monro-Matic Plus™ Driver or Passenger Side Shock Absorber by Monroe®. Quantity: 1 per Pack. Without Extended Hydraulic Lockout. Upper Mounting Code: Stem Mount - 2.375" Stem Length x 0.375"-16 Thread Pitch....
      Twin-Tube internal designAn ideal balance of comfort and control for any driving condition
      $16.12 - $16.80
    • (0 reviews)
      # 96887743
      Ford Mustang 1977, Driver or Passenger Side Front Pro Coil Shock Absorber by QA1®. Extended Height: 11". Quantity: 1 per Pack. Strut is designed specifically as a stock mount non-coil-over strut to be used with factory mounted...
      Twin-Tube internal designMade in the U.S.A.
      $124.55 - $275.08
    • (0 reviews)
      # 96887808
      Ford Mustang 1977, Front Driver or Passenger Side Stocker Star Aluminum Shock Absorber by QA1®. Mounting: Stud/Eyelet Poly. Compresed Height: 7.63". Extended Height: 11". Quantity: 1 per Pack. QA1’s Stocker Star is a lightweight...
      Twin-Tube internal designMade in the U.S.A.
      $119.76 - $257.50
    • (0 reviews)
      # 81790613
      Ford Mustang II with RideTech Lower Arms 1977, HQ Series™ Front ShockWaves by RideTech®. Quantity: 2 per Pack. The Handling Quality ("HQ") series features adjustable shock valving. It is housed in a lightweight aluminum impact...
      Aluminum impact forged construction allows leak free operationSingle rebound shock valving adjustment
      $900.00
    • (0 reviews)
      # 81788820
      Ford Mustang II 1977, HQ Series™ Shock Absorber by RideTech®. The HQ (handling quality) Series shocks adds rebound adjustment for the driver who wants to tune ride quality and handling quality to their specific taste.
      Billet end cap with integrated debris wiper to prevent seal damageIntegral internal bumpstop eliminates extension crashing
      $185.00 - $470.00
    • (0 reviews)
      # 106392624
      Ford Mustang with RideTech Lower Arms 1977, RQ Series™ Front ShockWaves by RideTech®. The Ride Quality ("RQ") series is a great entry level solution. It still retains all the mounting and installation advantages of the other...
      Fixed shock valving designed to optimize ride qualityAluminum impact forged construction provides leak free operation
      $800.00
    • (0 reviews)
      # 81788825
      Ford Mustang II 1977, RQ Series™ Shock Absorber by RideTech®. The RQ (ride quality) Series shocks have been designed and tuned for optimum ride quality in street rods, Muscle Cars, classic trucks and cruisers. It’s the perfect...
      1/2" hardened shaft is precision ground and straightened to a tolerance of .001" inch for increased durability and performanceBillet end cap with integrated debris wiper to prevent seal damage
      $135.00 - $370.00
    • (0 reviews)
      # 81788817
      Ford Mustang II with CoolRide 1977, Select Series™ Front Shock Absorbers by RideTech®. With Upper and Lower Shock Mounts. Includes: Hardware. The Select Series is a steel body monotube damper with two sets of independent internal...
      Electronically selectable soft or firm shock valving at the touch of a switchProven, reliable OEM electronic damping technology now available to the hot-rod market
      $800.00
    • (0 reviews)
      # 81790889
      Ford Mustang II with RideTech Lower Arms 1977, Select Series™ Front ShockWaves by RideTech®. The Select Series is a steel body monotube damper with two sets of independent internal valving so you can choose between "cruise-mode"...
      Proven reliable OEM electronic damping technologySteel monotube construction
      $1,200.00
    • (0 reviews)
      # 79641914
      Ford Mustang II 1977, Dual Adjustable Coil-Over Shock Kit by Flaming River®. Flaming River is here with its premium steering and suspension parts. Designed using state-of-the-art technology and high-quality materials, this product...
      Twin-Tube internal designManufactured from premium materials
      $247.13 - $695.87
    • (0 reviews)
      # 79731851
      Ford Mustang II 1977, Classic™ Rear Driver or Passenger Side Shock Absorber by Gabriel®. Quantity: 1 per Pack. With Accessory Kit. Without Dust Tube. Whether your ride is from the 40’s, 50’s, 60’s, or 70’s – or a...
      Twin-Tube internal designModern gas shock technology for classic, collectable and limited registration vehicles
      $26.44
    • (0 reviews)
      # 79641934
      Ford Mustang II 1977, High Tensile™ 8" Coil Spring by Flaming River®. Flaming River is here with its premium steering and suspension parts. Designed using state-of-the-art technology and high-quality materials, this product will...
      Manufactured from premium materialsDesigned to strict quality standards
      $96.85
    • (0 reviews)
      # 81788810
      Ford Mustang II 1977, StrongArms™ Front Control Arms by RideTech®. StrongArms™ are optimized to allow proper camber adjustment at your new lowered ride height without using a large stack of shims.
      Made with precision and quality in mindBuilt to last
      $400.00 - $500.00
    • (0 reviews)
      # 106392665
      Ford Mustang / Mustang II with 9" Axle 1977, Panhard Bar by RideTech®. Quantity: 1 per Pack. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with...
      Made with precision and quality in mindBuilt to last
      $150.00 - $200.00
    • (0 reviews)
      # 87536955
      Ford Mustang 1977, Trans-Shield by TCI®. Comes in a kit. Shield made from Aluminum. SFI-approved. TCI® Aluminum Transmission Shields are lightweight and fit over the body of the transmission to offer tough protection in the...
      $178.89 - $189.26
    • (0 reviews)
      # 40011227
      Ford Mustang II 1977 Front Control Arm Bushings by Energy Suspension®. Performance. Material: Polyurethane. Energy Suspension lets you upgrade worn and crumbling rubber bushings that dampen vibrations at mounting points for front...
      See Product Options for replacement bushing kits for lower and upper control arms, torsion arms, trailing arms, and track armsHigh-density polyurethane construction provides a superior cushioning effect and resists drying up and crumbling the way rubber mounts can
      $46.67 - $51.61
    • (0 reviews)
      # 11089027
      Ford Mustang II 1977 Front Strut Rod Bushings by Energy Suspension®. Performance. Material: Polyurethane. Energy Suspension lets you upgrade worn and crumbling rubber bushings that dampen vibrations at mounting points for front and...
      See Product Options for replacement bushing kits for front and rear strut towers, front and rear track arms, strut arms, and strut rodsSuspension C-bushing kits are available to restore positive camber lost after a vehicle has been lifted 2-4 inches, and over 4 inches
      $18.40
    • (0 reviews)
      # 85623365
      Ford Mustang II 1977, Drag Race Front Shock Absorber by Competition Engineering®. 1 per Pack. 3-Way Adjustable Drag Shocks are designed to allow the racer to dial-in the race car to meet changing track conditions. Shock valving...
      Monotube internal designDesigned to deliver performance
      $83.05
    • (0 reviews)
      # 81785816
      Ford Mustang II 1977, Ball Joint Ring by RideTech®. Quantity: 10 per Pack. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this...
      Made with precision and quality in mindBuilt to last
      $150.00
    • (0 reviews)
      # 83127253
      Ford Mustang II 1977, Excel-G™ Driver or Passenger Side Shock Absorber by KYB®. Quantity: 1 per Pack. Restore your vehicle's original performance for normal driving conditions with this twin-tube gas hydraulic shock that offers...
      Designed to restore original handling and controlCalibrated to compensate for age and miles driven
      $26.35 - $27.26
    • (0 reviews)
      # 17797774
      Ford Mustang II 1977, Gas-a-Just™ Front Driver or Passenger Side Shock Absorber by KYB®. Quantity: 1 per Pack. Compressed Length: 8.58". Extended Length: 10.82". Go with Gas-a-Just shocks and struts and experience greater...
      Replacement for an OE monotube shock to restore/keep the vehicle's original performance characteristicsIdeal as an upgrade from an OE twin-tube for quicker, more responsive handling and control
      $39.72
    • (0 reviews)
      # 64257598
      Ford Mustang II 1977, Super Touring™ Rear Passenger or Driver Side Shock Absorber by Sachs®. 2 Per Vechicle. SACHS shock absorbers distinguish themselves through original equipment quality and innovative technology. They provide...
      $33.90
    • (0 reviews)
      # 52885254
      Ford Mustang II 1977, Front Lower Control Arm by TRW®. Does your luxury car ride like an old buckboard wagon? Is your pickup still bouncing long after the bump? If so your suspension is in need of repair, but before you waste your...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $58.22
    • (0 reviews)
      # 21678125
      Ford Mustang II 1977, Front Coil Spring Set by MOOG®. 2 per Pack. Spring Type: Constant Rate. ID: 3.51". Bar Diameter: 0.57". Spring Rate: 317.00 lb Per Inch. Spring Load: 1400.00 lb. Installation Height: 9.50". Free Height:...
      Direct fit, with no modificationsRestores and retains proper handling
      $65.55
    • (0 reviews)
      # 19201106
      Ford Mustang II 1977, Front Ball Joint by Mevotech®. Quantity: 1 per Pack. Experience improved ride comfort and smooth handling with the replacement Mevotech ball joints. They grip the control arm better and guarantee worry-free...
      Includes durable higher and lower metal bearings for a smoother and quiet handlingKnurling on the outer housing of the ball joint makes for a better grip with the control arm
      $12.89 - $24.51
    • (0 reviews)
      # 49530285
      Ford Mustang II 1977, Ball Joint by Falcon®. 2 per Vehicle. Falcon Steering Ball Joints are made of the highest quality in the aftermarket. All Ball Joints meet or exceed OE requirements and are precision machined for a perfect fit.
      Produced to exact OE dimensional specifications under strict quality control throughout the manufacturing and assembly processPremium performance components
      $12.34 - $16.35
    • (0 reviews)
      # 21678113
      Ford Mustang II 1977, Front Ball Joint by MOOG®. 1 per Pack. Bolt-in Type. Greasable. Includes: Powdered-Metal Gusher Bearing to Allow Grease to Penetrate Bearing Surfaces. MOOG ball joints are the preferred choice of many...
      Engineered to retain socket torque and smooth articulation over the life of the part, to maintain tight steering feelExclusive powdered-metal bearing design allows grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
      $29.02 - $29.99
    • (0 reviews)
      # 104021842
      Ford Mustang II 1977, Upper Ball Joint Kit by TRW®. Does your luxury car ride like an old buckboard wagon? Is your pickup still bouncing long after the bump? If so your suspension is in need of repair, but before you waste your...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $52.56
    • (0 reviews)
      # 72695225
      Ford Mustang II 1977, C-Tek™ Ball Joint by Centric®. The company has one of the industry’s best programs for tracking and cataloging original equipment, and devising quality aftermarket and OE parts for consumers, mechanics and...
      Intended for a comfortable driving experienceExpertly crafted from premium materials
      $12.21 - $16.32
    • (0 reviews)
      # 64763686
      Ford Mustang II 1977, Premium Ball Joint by Centric®. The company has one of the industry’s best programs for tracking and cataloging original equipment, and devising quality aftermarket and OE parts for consumers, mechanics and...
      Intended for a comfortable driving experienceExpertly crafted from premium materials
      $15.63 - $21.31
    • (0 reviews)
      # 64626053
      Ford Mustang II 1977, Premium Front Stabilizer Bar Link by Centric®. The company has one of the industry’s best programs for tracking and cataloging original equipment, and devising quality aftermarket and OE parts for consumers,...
      Intended for a comfortable driving experienceExpertly crafted from premium materials
      $17.24
    • (0 reviews)
      # 79248523
      Ford Mustang II 1977, Premium Rear Rearward Leaf Spring Shackle by Centric®. The company has one of the industry’s best programs for tracking and cataloging original equipment, and devising quality aftermarket and OE parts for...
      Intended for a comfortable driving experienceExpertly crafted from premium materials
      $28.04 - $38.30
    • (0 reviews)
      # 109990308
      Ford Mustang II 1977, Strut-Mate™ Front Shock Boot Kit by Monroe®. The boot kit is designed to protect the strut piston rod from stones, mud, water, sand, and other abrasives providing longer service life for the strut. In...
      Protects the piston rod from corrosion, dirt, moisture and impact.Prolongs strut service life
      $7.22
    • (0 reviews)
      # 38317091
      Ford Mustang II 1977, Front Stabilizer Bar Link by MOOG®. 1 per Pack. If you hear noise and are experiencing excessive body roll, you may be in need of sway bar links. This kit is designed to simplify installation and built with...
      Socket style links feature superior metal bearingsGreasable design for longer life and smooth operation on socket style links
      $19.24
    • (0 reviews)
      # 21648812
      Ford Mustang II 1977, Split Design Stabilizer Bar Bushing Kit by MOOG®. At Front to Frame. 2 per Pack. Fits a 1" or 1.125" or 1.1875" or Larger Bar. Replace your worn or damaged bushings with stronger and longer-lasting bushings...
      Restore handling and enable proper alignmentReduce noise
      $8.56
    • (1 reviews)
      # 14251534
      Ford Mustang II 1977, Air Compressor Isolators by Suncore®. Quantity: 3 per Pack. Compressor Rubber Vibration Isolator kit absorbs the vibration from your air suspension compressor and gets Rid of The Vibration Noise. This Kit...
      Easy to installInstallation instructions included
      $18.75
    • (0 reviews)
      # 98945852
      Ford Mustang II with 25 mm (1") Sway Bar 1977, Front Sway Bar Bushings by Mevotech®. Quantity: 1 per Vehicle. Stabilizer bar bushings provide direct transmission of force from the sway bar to the body of the vehicle. Bushings...
      Built to match or go beyond OE standardsDirect replacement
      $6.00 - $7.62
    • (0 reviews)
      # 98945850
      Ford Mustang II 1977, Front Upper Control Arm Bushing by Mevotech®. Quantity: 2 per Vehicle. Designed to increase friction amount between the tire and road surface for an effective steering ability and better handling, this control...
      Eliminates uneven steering, squeaking noise, and excessive tire wearAllocates vehicle body weight to the tire for vehicle stability and alignment
      $9.56 - $11.05
    • (0 reviews)
      # 49530298
      Ford Mustang II 1977, Control Arm Bushing Kit by Falcon®. 2 per Vehicle. Falcon Steering bushings are made with thermoplastic Elastomers for increased service life and optimum performance. Our thermoplastic bushings are made to...
      Made with Thermoplastic Elastomers (TPV)Improved OE Design
      $7.94 - $9.68
    • (0 reviews)
      # 104021855
      Ford Mustang II 1977, Front Upper Control Arm Bushing Kit by TRW®. Quantity: 2 per Pack. Does your luxury car ride like an old buckboard wagon? Is your pickup still bouncing long after the bump? If so your suspension is in need of...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $24.19
    • (0 reviews)
      # 64763691
      Ford Mustang II 1977, Premium Control Arm Bushing by Centric®. The company has one of the industry’s best programs for tracking and cataloging original equipment, and devising quality aftermarket and OE parts for consumers,...
      Intended for a comfortable driving experienceExpertly crafted from premium materials
      $8.80
    • (0 reviews)
      # 64626052
      Ford Mustang II 1977, Premium Front Strut Rod Bushing by Centric®. The company has one of the industry’s best programs for tracking and cataloging original equipment, and devising quality aftermarket and OE parts for consumers,...
      Intended for a comfortable driving experienceExpertly crafted from premium materials
      $27.20
    • (0 reviews)
      # 64763697
      Ford Mustang II 1977, Premium Front To Frame Stabilizer Bar Bushing by Centric®. The company has one of the industry’s best programs for tracking and cataloging original equipment, and devising quality aftermarket and OE parts...
      Intended for a comfortable driving experienceExpertly crafted from premium materials
      $4.68 - $9.36
    • (0 reviews)
      # 64763694
      Ford Mustang II 1977, Premium Leaf Spring Bushing by Centric®. The company has one of the industry’s best programs for tracking and cataloging original equipment, and devising quality aftermarket and OE parts for consumers,...
      Intended for a comfortable driving experienceExpertly crafted from premium materials
      $2.34 - $7.02
    • (0 reviews)
      # 69957193
      Ford Mustang II 1977, Professional™ Front Stabilizer Bar Bushing Kit by ACDelco®. Location: To Frame. For 1" Swaybar Diameter. ACDelco Professional Truck Bushings have a new dual-axis design adjuster for up to 25% greater...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $9.22
    • (0 reviews)
      # 69957194
      Ford Mustang II 1977, Professional™ Front Upper Control Arm Bushing by ACDelco®. ACDelco Professional Truck Bushings have a new dual-axis design adjuster for up to 25% greater range of adjustment over other styles of truck...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $20.99
    • (0 reviews)
      # 21678118
      Ford Mustang II 1977, Front Lower Control Arm Bushing by MOOG®. 1 per Pack. Replace your worn or damaged bushings with stronger and longer-lasting bushings from MOOG that effectively absorb substantial loads and are less prone to...
      Restore handling and enable proper alignmentReduce noise
      $8.97
    • (0 reviews)
      # 21648707
      Ford Mustang II 1977, Improved Design Front Strut Rod Bushing by MOOG®. 1 per Pack. Replace your worn or damaged bushings with stronger and longer-lasting bushings from MOOG that effectively absorb substantial loads and are less...
      Restore handling and enable proper alignmentReduce noise
      $45.35
    • (0 reviews)
      # 21678117
      Ford Mustang II 1977, Standard Design Front Upper Control Arm Bushing Kit by MOOG®. 2 per Pack. Includes: Front and Rear Bushings. Replace your worn or damaged bushings with stronger and longer-lasting bushings from MOOG that...
      Restore handling and enable proper alignmentReduce noise
      $16.01
    • (0 reviews)
      # 96880551
      Ford Mustang 1977, Front Driver or Passenger Side Stocker Star Steel Economy Non-Adjustable Shock Absorber by QA1®. Mounting: Stud/ Eye Bushing. Compressed Height: 8.12". Extended Height: 11.50". Quantity: 1 per Pack. Economy line...
      Twin-Tube internal designEasy, Bolt-In Installation
      $117.46
    • (0 reviews)
      # 98908245
      Ford Mustang II V8 without Air Condition 1977, Front Coil Springs by Mevotech®. Quantity: 1 per Vehicle. You can improve the efficiency of your vehicle's suspension system and restore factory-like characteristics with Mevotech...
      Restore the vehicle's suspension performanceDirect replacement for proper fitment
      $84.36
    • (0 reviews)
      # 135456027
      Ford Mustang II 1977, Upper Shock Mounting Kit by KYB®. Includes: 2 Washers, 2 Rubber Bushings. With 2 Nuts. When replacing struts, it's also a great idea to replace strut mounts too. They optimize suspension performance by...
      On front struts, the mount includes a bearing that acts as a pivot for the steering mechanism, providing a smooth steering responseEnables accurate wheel alignment
      $6.22
    • (0 reviews)
      # 96880639
      Universal 16 Series Aluminum Threaded Body Monotube Circle Track Shock Absorber by QA1®. The 16 Series shock is a threaded large body shock that is built to last at an affordable price. Adjust your gas pressure on-the-fly with the...
      2” O.D. hard anodized aluminum threaded monotube bodyLinear or digressive valving available
      $184.55 - $193.78
    • (0 reviews)
      # 96880801
      Universal 20 Series Sealed Monotube Circle Track Shock Absorber by QA1®. Mounting: Eyelet Bearing/Eyelet Bearing. Are you racing in a series that requires a sealed shock? QA1's 20 Series Sealed Monotube Shock is exactly what you...
      Monotube internal design2" O.D. one piece steel body
      $119.76
    • (0 reviews)
      # 78602466
      Universal 26 Series Steel Monotube Circle Track Shock Absorber by QA1®. Mounting: Eyelet Bearing/Eyelet Bearing. The 26 Series shock is a one piece monotube shock that is well suited for a variety of track conditions or as a...
      2" O.D. zinc plated steel monotube bodyAvailable with Hyperscrew, Sealed Hyperscrew (IMCA Lega) or Schrader Valve
      $134.14 - $156.86
    • (1 reviews)
      # 96881685
      Universal 28 Series Monotube Circle Track Shock Absorber with Expanded Gas Chamber by QA1®. Mounting: Eyelet Bearing/Eyelet Bearing. The 28 Series shock is an expanded gas chamber shock that performs well in various track...
      2" O.D. zinc plated steel monotube bodyExpanded gas chamber for increased feel, traction and performance
      $221.47 - $249.16




    Guides & Articles

    • Off-Road Bumpers
      Skid Plates Provide The Ultimate In Off-Road Protection
      If you take your 4x4 off-roading, you have likely gained an appreciation of how unforgiving trails can be when it comes to your vehicle's underside. Deep ruts with rough edges can appear out of nowhere, sturdy-looking rocks can shift unexpectedly, and tranquil bodies of water can hide everything from sinkholes to fallen tree trunks. Before you know it, the underside of your truck has bounced off something hard enough to damage moving suspension components or puncture housings containing engine oil, gasoline, transmission fluid, or differential gear oil.
    • Performance Suspension Parts
      How much lift is needed for larger tires on my 2007-up Jeep Wrangler?
      Twenty years after the first Jeep Wrangler model debuted in 1987, third-generation Wranglers were introduced for the 2007 model year. Unlike any previous Wranglers or CJs, a 4-door Unlimited model (known internally as the "JKU" body) was offered alongside the standard 2-door ("JK" body). Because it took the off-road capability Wranglers are known for and broadened it with the practicality of 4 doors for those needing a family vehicle, third-generation Wranglers have proven very successful in the marketplace. Maintaining Jeep tradition, this Wrangler appeals by offering a higher-than-average number of advantages for the 4x4 enthusiast, whether it's used for rock crawling or as an everyday driver.
    • Performance Suspension Parts
      Coilovers Are Pricey - Why Would I Spend My Money For Them?
      When first glancing through the Performance Coilover Kits section of our website, you may be put off by some of the prices you see. After all, what are you buying other than a combo set of springs and shocks under some fancy name? Certainly, you ask yourself, can't you purchase springs and shocks separately and monetarily come out ahead?
    • Performance Suspension Parts
      Body Lifts & Suspension Lifts From 2 to 10 Inches | What are my Lift Kit Choices?
      Has this happened to you? You catch a glimpse of a truck like yours in a parking lot or around town that, for some reason, you like better than your own. It seems to have a stance that's more rugged-looking and more suited to a 4x4 than yours does. Maybe you get a chance to stop and take a closer look immediately, or maybe it's days or weeks before you see the other truck again.
    • Automotive Tools
      What Special Tools Are Available For Suspension Repair?
      Seasoned professional automotive technicians often say if you're using too much physical effort during a repair, you're simply not using the right tool. This is true, and a perfect example is repairing and replacing suspension components. If you've ever done this type of work or attempted to do it, you know it can be trickier than merely loosening and tightening bolts.
    • Performance Suspension Parts
      Coil, Leaf, & Torsion Bar | Describing The 3 Different Kinds of Springs
      The springs in your vehicle probably aren't something you think about until there's a problem or you've decided to upgrade suspension parts in the interest of sportier handling. But what specifically do springs do? In short, they play a major role in the safe handling and ride comfort of your vehicle. Not only do they keep a vehicle at a designated standing height, they provide recoil necessary to bounce back after suspension components move up and down over uneven road surfaces. By themselves, springs will continue to bounce up and down for a long time unless a motion damper such as a shock absorber is present to keep things stable. Springs can be soft and extremely bouncy, or they can be stiffer and less bounce-prone.
    • Performance Suspension Parts
      How Do Shock Absorbers Work?
      Shock absorbers (also known as "shocks") are the suspension components which slow, then stop, the up-and-down bouncing movement of your vehicle's springs through a process known as dampening. Without shocks to calm things down, springs will continue to extend and release energy they absorb from bumps in the road at an uncontrolled rate - bouncing for a long time until their kinetic energy finally dissipates. Needless to say, this would produce an extremely bouncy ride that would be hard to control over uneven road surfaces.
    • Performance Transmission Parts
      Suspension Enhancements Will Raise The Rear Of Your Tow Vehicle
      If you are using your "daily driver" car or truck for occasional towing duty, you are looking for that ideal sweet spot where the weekday commute is comfortable and quiet, and the weekend trailering feels solid and secure. In other words, you don't want to vehicle to feel too "stiff" during the week, nor do you want it to ride "soft" when pulling a trailer.
    • Wheels & Rims
      Stanced Wheels, Demon Camber | How Do I Get That Look?
      Stanced. Demon camber. You may know it as oni-camber. You've seen the look, and whether you like it or not is totally beside the point. The great thing about this stanced look is that it gets your attention. From the interviews we've read with owners and drivers of these machines, that is exactly what they are after. They've said that it's all about being noticed.
    • Performance Suspension Parts
      Stock vs Performance Suspension
      Very often we don't even realize what a crucial role a car's suspension plays in providing a safe and comfortable ride. The system maximizes the friction between the road surface and your vehicle's tires, ensuring steering stability along with responsive handling.
    • Performance Suspension Parts
      Shocks Versus Struts: The Big Answers Revealed!
      Shock absorbers, also known simply as “shocks” (which is what we will call them for the rest of this article), are the suspension components which stop your car or truck from bouncing up and down after hitting a bump. They are a major contributor to your ride comfort and safety.
    • Replacement Suspension Parts
      How to Inspect Your Suspension System
      The very first thing to know about timely suspension system diagnosis is that the stability and steering control of your vehicle and, what is more important, your safety on the road depends on how often you make it. Automotive suspension belongs to one of those car systems that are constantly exposed to high loads and thus are prone to wear and tear. Most specialists recommend inspecting suspension system after every 6,500-7,500 miles or when there are any signs of its breakage.
    • Performance Suspension Parts
      How Low Can You Go?
      Lowering is high on the list of many people who want to improve the appearance of their car. If you want to lower your car with the coil springs, then replacing them with lowering springs is the way to go. But what if you want to lower your car and also make it handle better? If that’s your goal then consider coil-over shocks.

    Popular Products

    1977 Ford Mustang Performance Suspension Reviews

    Average rating:  5  5 - 10 reviews
    4.8 of 5
    Good Product
    I needed new shocks for my car so I bought QA1 28 series shock absorber. Durable construction, great looks and perfect fit. My car now handles much better without any sacrifice to ride quality.
    JPosted by John (Troy, MI) /
    Was this review helpful for you? Yes
    View More
    Related 1977 Ford Mustang Pages
    1977 Ford Mustang Models
    SECURE SHOPPING

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
    It is neither inferred nor implied that any item sold by CARiD.com, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.