Chevy Camaro 1974-1977, Driver or Passenger Side Parking Light Lens and Reflector by Goodmark®, 2 Required. The header panel is located at the front of a car or truck. It can be just a small sheet metal panel on some vehicles or a large panel to which most of the front end pieces attach on others. In its position at the front of your classic or muscle car, the header panel is subject to damage from gravel, stones and debris thrown up by other vehicles and from even the slightest collision. To make sure the front end of your classic goes together right, you need a reproduction header panel from the restoration experts at Goodmark.
A header panel can be a small sheet metal panel located between the hood and grille, but on many cars and trucks the header panel extends from fender to fender across the front of the vehicle, and houses the grille, headlights and parking lights. Whatever its configuration on your classic, after 40 or 50 years your header panel has probably seen better days. So whether you just want to repair some damage or you’re doing a total restoration, treat your baby to the best, a quality reproduction header panel from Goodmark.
Restoring cars isn’t just a business for the people at Goodmark, they’re also car enthusiasts and restorers just like you, and they wouldn’t make anything they wouldn’t install on their own cars or trucks. Each header panel is CAD/CAM designed to make sure it exactly replicates the original part, and then it’s manufactured with the most modern tooling. Each design is test fit to make sure it looks and fits perfectly. Many Goodmark parts have been approved by the manufacturers of the original equipment and are licensed to be sold as genuine replacement parts.
A Goodmark header panel is an authentic reproduction, made to the same specifications as the original part. Correct in every detail, it will make your car look just as it did the day it came from the factory. And to make sure the restoration of this area of your car is complete; Goodmark has grilles, lights, emblems and moldings to finish the job right. Each part is faithfully reproduced for concours appearance and quality.
Goodmark was founded in 1991 by car enthusiasts, restorers and collectors just like you. They recognized that there was a need for quality restoration parts, especially sheet metal parts, if the restoration of our beloved American classics was to continue. Since that time, Goodmark has created a complete line of sheet metal, trim parts, and accessories for popular cars like the Chevrolet Camaro and Ford Mustang, and for previously difficult to restore cars like the Dodge Challenger and Plymouth Barracuda. Goodmark uses CAD/CAM (computer aided design and computer aided manufacturing) software and modern tooling and manufacturing techniques to create parts that are identical to factory original for perfect fit and finish. Quality parts tooled and manufactured by Goodmark are enabling many more American classic and muscle cars to return to the road, looking just as fine as the day they rolled off the assembly line.
Every Customer can leave a review about our service and the product that was purchased. In order to leave your review for your new product, please follow the link in the email you receive after completing your purchase. You can rate appearance, ease of installation, price/value and product quality.
The handle looked fine when I got it out of the box, and it fit where it was supposed to. My only problem with this handle is that it is supposed to be riveted to the door, but that's not a problem with the product, it's just with the design.
This hood made my 2003 Ford Super Crew look like a real boss. I mean it really made a very good upgrade on my truck. It looks like a freaking cobra. Would recommend it to anyone looking to customize their ride. Really pleased with overall look.
At first I thought it was a bit expensive, but... It made a total difference in how the door functions on the car. After removing the old striker, I found that it was not only missing the bushing, but also had a hairline crack. After installing the new striker, a three minute job. Ahh.. a job that actually took less time than planned. After some small adjustments, it worked just like a new door. Gives a totally different impression about the entire car, when the door simply goes "Thunk" rather than trying different ways to make it close properly. I bought the car a couple of months ago in Norway. It seems silly, but if the doors don't close properly, you begin to have doubts about other things on the car. So.... A well spent $50 bucks, for a quality product, that really is "Like New." Actually, I am so happy, that I am going to buy another striker, for the other side of the car. My "bad door" is now so much better than my "good door."
The part is really good, fits like a glove. The metal is covered with some kind black paint. Don't know whether I should remove it before painting. Shipping and installation - no problems.
The old hood seal was terrible. Water was penetrating and I didn't notice it timely. Found all I need at CARiD and purchased. Installed with no problems at all. But anyway, the hood already began to rust, so I'll replace it too. Luckily, now I know where to look for parts - thx CARiD.
Very glad! The hood is of excellent quality and the fit is perfect too. 4" raised scoop looks sick. Can't wait when I ride around the block. Too bad my Camaro's not on the move - looking for a new engine...
It was pretty hard to find parts for old school cars. Digged all the Internet before stumbled upon CARiD. Ordered a pair of rear fenders. Shipped fast - the next day after the order. Quarter panels look great, not a single dent or scratch.
I was so, so happy to find such a huge amount of parts for my old gen1 Mustang! There are like looots of parts in here. Ordered seals and gaskets for $100 and some body parts for $800. Now, I have app half of the car sent to me!