1977 Chevy Blazer Performance Exhaust Systems

Change Vehicle
1 - 60 of 826 results
show:
sort by:
    • (0 reviews)
      # 64169781
      Chevy Blazer 1977, Dual Competition™ Header-Back Exhaust System Kit by Hooker®. Exhaust Type: Header-Back. Main Piping Diameter: 2.25". Muffler Series: Dual Competition™. Full stainless steel exhaust system comes complete with...
      This part is legal for use on Uncontrolled (Non-Emissions Controlled) Vehicles or Racing VehiclesEach system is supplied with a high-efficiency stamped crossover & high-flow TIG-welded 304 SS absorption mufflers
      $194.95 - $198.95
    • (0 reviews)
      # 64169785
      Chevy Blazer 1977, Dual Competition™ Manifold-Back Exhaust System by Hooker®. Exhaust Type: Manifold-Back. Main Piping Diameter: 2.25". Muffler Series: Dual Competition™. Hooker Manifold Back exhaust system is constructed of...
      Reducer Flex-TubesReduces Backpressure
      $228.95
    • (0 reviews)
      # 64167766
      Chevy Blazer 7.4L 4WD (Four Wheel Drive) 1977, Super Competition™ Dual Cat-Back Exhaust System by Hooker®. Exhaust Type: Cat-Back. Muffler Series: Super Competition™. This product is made of high-quality materials to serve you...
      Mandrel Bent Not Press BentConsistent Inside Diameter
      $324.95
    • (0 reviews)
      # 64818924
      Chevy Blazer 5.0L / 5.7L 1977, Afterburner™ Headers by Flowtech®. CARB Compliant: No. Primary Tubing Diameter: 1.625". Without A.I.R. Tubes. FLOWTECH Afterburner headers provide an optimal balance between horsepower output and...
      Innovative design for small block Chevy equipped vehiclesIncreases both horsepower and torque Large 3" secondary collector
      $232.95 - $402.95
    • (0 reviews)
      # 203424056
      Chevy Blazer 1977, Block Hugger Headers by Flowtech®. CARB Compliant: No. System Type: Block Hugger. Collector Outlet Diameter: 2.5". Flowtech Headers are the perfect combination of quality and value. This tight fit block hugger...
      Tight fit block hugger design for popular hot rod and street rodsHeavy duty 16-gauge tubing for increased strength and durability
      $164.95 - $438.95
    • (0 reviews)
      # 64818912
      Chevy Blazer 1977, Long Tube Headers by Flowtech®. FLOWTECH headers are precision engineered and leak tested to get maximum performance and fuel economy from your engine. Each header is formed from specially selected .060 cold roll...
      Mandrel-formed Power Plenum collectors for low backpressureConstructed of .060 cold roll flash mild steel tubing
      $148.95 - $315.95
    • (0 reviews)
      # 64169763
      Chevy Blazer 1977, Competition™ Long Tube Header by Hooker®. Series: Competition™. System Type: Long Tube Header. CARB Compliant: No. Collector Length: 8". Port Shape: Same As Port. Hooker Competition headers offer the best...
      Provides unique styling enhancementIncreased corrosion protection ensures long service life and maintained appearance of investment
      $199.95 - $592.95
    • (0 reviews)
      # 64169789
      Chevy Blazer 1977, Super Competition™ Long Tube Header by Hooker®. Series: Super Competition™. System Type: Long Tube Header. CARB Compliant: No. Port Shape: Same As Port. All necessary hardware included for a complete...
      Expertly crafted from premium materialsDesigned to match rigorous quality standards
      $496.95 - $949.95
    • (0 reviews)
      # 84200044
      Chevy Blazer With Chevy Small Block Engine 1977, 604 Crate Engine Dirt Late Model Mild Steel Header Kit by Dynatech®. These 604 Crate Engine Dirt Late Model Headers have been designed specifically for use with 604 Crate Engines....
      Delivers a huge boost in performance and an awesome soundRigorously dyno-tested to provide maximum horsepower and torque gains
      $379.99
    • (0 reviews)
      # 84200056
      Chevy Blazer With Chevy Small Block Engine 1977, 604 Crate Engine Stainless Steel Dirt Late Model Headers by Dynatech®. These Stainless Steel 604 Crate Engine Dirt Late Model Header Kits have been designed specifically for use with...
      Engineered for 604 Crate enginesGaskets and bolts included
      $924.99
    • (0 reviews)
      # 126970926
      Chevy Blazer 5.0L / 5.7L / 6.6L With Chevy Small Block Engine 1977, Dirt Late Model Headers by Dynatech®. These Long Tube Dirt Late Model Headers are designed for use with straight or angle plug heads and standard Chevy engines.
      Gaskets and bolts includedMachine surfaced flanges - no leaks
      $309.99 - $374.99
    • (0 reviews)
      # 126970939
      Chevy Blazer 5.0L / 5.7L / 6.6L With Chevy Small Block Engine 1977, Economy Crossover Headers by Dynatech®. These Economy Crossover Headers are designed for use with a variety of engines and applications. Designed for angle or...
      Non-equal length design gives flat torque curve for slick tracksValve covers can be removed with header installed
      $299.99 - $319.99
    • (0 reviews)
      # 126970930
      Chevy Blazer 5.0L / 5.7L / 6.6L With Angle or Straight Plug Heads With Chevy Small Block Engine 1977, IMCA Modified Mild Steel Headers by Dynatech®. 1 Pair. These Modified Headers have been designed for use with straight or angle...
      Made of High Quality MaterialsGaskets and bolts included
      $269.99 - $329.99
    • (0 reviews)
      # 84197978
      Chevy Blazer 5.0L / 5.7L / 6.6L With Chevy Small Block Engine 1977, IMCA Southern Sport Mod Mild Steel Headers by Dynatech®. Tube Outlet Diameter: 1.63". Collector Diameter: 3.00". Collector Length: 7.75". Flange Style: Square...
      Engineered for 602 Crate enginesGaskets and bolts included
      $229.99
    • (0 reviews)
      # 126970913
      Chevy Blazer 7.4L With Chevy Big Block Engine 1977, Long Tube Dragster Headers by Dynatech®. 1 Pair. These Long Tube Dragster Headers are designed with looks and performance in mind.
      CNC laser cut flanges feature raised port location for increased powerUnique port gussets eliminate cracking caused by tire shake and muffler applications
      $739.99 - $1,399.99
    • (0 reviews)
      # 84200051
      Chevy Blazer 5.0L / 5.7L / 6.6L With Chevy Small Block Engine 1977, Long Tube Pavement Late Model Headers by Dynatech®. 1 Pair. These Long Tube Pavement Late Model Headers are designed for use with Standard Chevy engines. The Long...
      35” Equal Length primaries for maximum Torque and HorsepowerValve covers are removable with headers installed
      $389.99 - $399.99
    • (0 reviews)
      # 126970933
      Chevy Blazer 5.0L / 5.7L / 6.6L With Chevy Small Block Engine 1977, Mid Length Modified Headers by Dynatech®. These Mid Length Modified Headers have been designed for use with straight or angle plug heads.
      Fits angle or straight plug heads.Gaskets and bolts included.
      $239.99 - $309.99
    • (0 reviews)
      # 126970942
      Chevy Blazer 5.0L / 5.7L / 6.6L With Chevy Small Block Engine 1977, Mild Steel Stock Clip Headers by Dynatech®. 1 Pair. These Small IMCA Southern Sport Mod Headers have been designed for use with angle or straight plug heads. IMCA...
      Fits standard Chevy engines with angle or straight plug headsGaskets and bolts included
      $249.99 - $309.99
    • (0 reviews)
      # 96828586
      Chevy Blazer 5.0L / 5.7L / 6.6L With Chevy Small Block Engine 1977, Pro Cruiser Block Hugger Headers by Dynatech®. 1 Pair. Includes a pair of reducers (2.50" to 2.25"). Tube Outlet Diameter: 1.63". Collector Diameter: 2.50". Flange...
      Improves Performance and Appearance100% stainless steel construction
      $299.99
    • (0 reviews)
      # 126970920
      Chevy Blazer 1977, Weld-up Dragster Header Kit by Dynatech®. Designed specifically for strut type front end cars and dragsters, this kit allows you to fabricate your own headers to save money or make changes to the kit to fit your...
      Tack-welded to make it easy to change or finish weldCNC laser-cut flanges, gaskets and bolts included
      $349.99
    • (0 reviews)
      # 87265838
      Chevy Blazer With Chevy Small Block Engine 1977, 180 Crossover Headers by Schoenfeld Headers®. Comes in a set. Includes: Bolts/Studs, Gaskets. Header made from Steel. This top-notch product by Schoenfeld Headers is made to give...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $253.45 - $360.70
    • (0 reviews)
      # 87265843
      Chevy Blazer With Chevy Small Block Engine 5.0L / 5.7L / 6.6L 1977, Chassis Headers by Schoenfeld Headers®. Comes in a kit. Includes: Bolts/Studs, Gaskets. Header made from Steel. This top-notch product by Schoenfeld Headers is...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $168.43 - $252.67
    • (0 reviews)
      # 87265851
      Chevy Blazer With Chevy Small Block Engine 1977, Conventional Crossover Headers by Schoenfeld Headers®. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This product is...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $263.20 - $671.84
    • (0 reviews)
      # 87265871
      Chevy Blazer With Chevy Small Block Engine 5.0L / 5.7L / 6.6L 1977, DIRT Modified Headers by Schoenfeld Headers®. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $263.20 - $302.20
    • (0 reviews)
      # 87258388
      Chevy Blazer With Chevy Small Block Engine 5.0L / 5.7L / 6.6L 1977, Demolition Derby Headers by Schoenfeld Headers®. Primary Tubing Diameter: 1.625". This top-notch product by Schoenfeld Headers is made to give that extra boost...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $136.84
    • (0 reviews)
      # 87265878
      Chevy Blazer With Chevy Small Block Engine 5.0L / 5.7L / 6.6L 1977, Dirt Late Model Headers by Schoenfeld Headers®. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $263.20 - $745.48
    • (0 reviews)
      # 56801691
      Chevy Blazer With Chevy Big Block Engine 7.4L 1977, Dyno Sprint Headers by Schoenfeld Headers®. Bolts & Gaskets Included. Primary Tubing Diameter: 2.125". Collector Diameter: 4". Collector Length: 13". This top-notch product by...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $341.20
    • (0 reviews)
      # 87265833
      Chevy Blazer With Chevy Small Block Engine 1977, H Style Crossover Headers by Schoenfeld Headers®. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This product is...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $263.20 - $302.20
    • (0 reviews)
      # 87265916
      Chevy Blazer With Chevy Small Block Engine 1977, IMCA Modified Headers by Schoenfeld Headers®. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This product is designed...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $168.43 - $364.99
    • (0 reviews)
      # 87265809
      Chevy Blazer 1977, Sprint Car Headers by Schoenfeld Headers®. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This product is designed with utmost care and meticulous...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $221.08 - $644.23
    • (0 reviews)
      # 87265986
      Chevy Blazer With Chevy Small Block Engine 5.0L / 5.7L / 6.6L 1977, Stock Clip Headers by Schoenfeld Headers®. Comes in a set. Fenderwell, Painted. Includes: Bolts/Studs, Gaskets. Header made from Steel. This top-notch product by...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $200.02 - $263.20
    • (0 reviews)
      # 87265991
      Chevy Blazer With Chevy Small Block Engine 5.0L / 5.7L / 6.6L 1977, Street Stock Header by Schoenfeld Headers®. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $221.08 - $644.23
    • (0 reviews)
      # 87265998
      Chevy Blazer With Chevy Small Block Engine 5.0L / 5.7L / 6.6L 1977, Tri-Y Modified Header by Schoenfeld Headers®. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $644.23 - $699.46
    • (0 reviews)
      # 197534802
      Chevy Blazer V8 1977, Truck Pull Header by Schoenfeld Headers®. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This product is designed with utmost care and meticulous...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $221.08 - $370.45
    • (0 reviews)
      # 87258383
      Chevy Blazer With Chevy Small Block Engine 5.0L / 5.7L / 6.6L 1977, Zoomie Headers by Schoenfeld Headers®. Standard Zoomie Grassburner. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $134.73
    • (0 reviews)
      # 69346821
      Chevy Blazer 5.0L / 5.7L / 6.6L With Small Block 1977, Block Hugger™ Header by BTP®. Heavy Duty 1-5/8" Steel Tubes w/ 3/8" Flanges. Includes Collector Reducers, Gasket & Bolts. Replaces all Center Dump stock Manifolds. Not for...
      Engineered to make your exhaust system perform at its peakProvides a powerful and aggressive sound
      $136.80 - $248.40
    • (0 reviews)
      # 22206089
      Chevy Blazer 4.1L / 5.0L / 5.7L / 6.6L 1977, Direct Fit California Pre-OBDII Catalytic Converter by MagnaFlow®. Catalytic Series: Pre-OBDII. Catalytic Converter Substrate Material: Ceramic. Converter Body Material: Stainless Steel....
      Increases exhaust flow compared to original factory converterIncreased exhaust flow allows your engine to make more power
      $262.24
    • (0 reviews)
      # 22206092
      Chevy Blazer 4.1L / 5.0L / 5.7L / 6.6L 1977, Direct Fit Federal Standard Catalytic Converter by MagnaFlow®. Catalytic Series: Standard. Catalytic Converter Substrate Material: Ceramic. Converter Body Material: Stainless Steel. CARB...
      Converter body manufactured from heavy-duty stainless steelIncreases exhaust flow compared to original factory converter
      $144.58
    • (0 reviews)
      # 100083590
      Chevy Blazer 5.0L / 5.7L 1977, 3-Bolt Reducer with O2 Sensor Fitting by Flowtech®. 3-Bolt. Flowtech understands that when you purchase a set of headers, a muffler, or even an entire exhaust system, you want to know that you’re...
      Expertly crafted from premium materialsDesigned to match rigorous quality standards
      $37.50
    • (0 reviews)
      # 126970936
      Chevy Blazer 5.0L / 5.7L / 6.6L With Chevy Small Block Engine / With LS-Based Engines 1977, MuscleMAXX Stainless Steel Header Reducer Cone Kit by Dynatech®. Sold as kit. Dynatech® reducer cone kits for MuscleMaxx headers. Reducers...
      Made of High Quality MaterialsBuilt to Last
      $139.99 - $148.49
    • (0 reviews)
      # 64818908
      Chevy Blazer 1977, Aluminum Header Gasket Set by Flowtech®. Includes 1 Pair Head Flange Gaskets, 1 Pair Exhaust Collector Gaskets. This product is made of high-quality materials to serve you for years to come. Designed using...
      Engineered for a precise, easy fitManufactured of P73 Ferroglass non-asbestos facing material for long life
      $10.04 - $13.39
    • (0 reviews)
      # 64818920
      Chevy Blazer 1977, Real-Seal™ Aluminum Header Gaskets by Flowtech®. Flowtech REAL-SEAL header and collector gaskets are a revolutionary break-through in exhaust sealing technology. Constructed of separate layers of “Dead...
      Multi-Layer “Dead Soft” aluminum conforms to create a leak-proof sealWill not burn or blow out
      $52.73
    • (0 reviews)
      # 64167688
      Chevy Blazer 5.0L / 5.7L 1977, Super Competition™ Header Gasket by Hooker®. Series: Super Competition™. Port Shape: Square. Thickness: 0.07". Same As Port. Hooker's precision-matched Super Competition header gaskets provide a...
      Precision fit for improved sealingSteel core provides superior adhesion
      $12.89
    • (1 review)
      # 73925960
      Chevy Blazer 1977, Pressure Master™ Header Seal by Earl's Performance®. Pressure Master™ Seals, designed and manufactured for Earl’s by Parker Hannifin Corporation, were the first high performance seals developed to solve...
      Uses Aerospace TechnologyReusable/Adaptable
      $23.30 - $42.40
    • (0 reviews)
      # 84197985
      Chevy Blazer 5.0L / 5.7L / 6.6L With Chevy Small Block Engine 1977, Aluminum Adapter Plate Small Block Chevy to STAHL by Dynatech®. Sold as kit. These SBC to Stahl Aluminum Adapter Plate Kits allow you to use a larger tube size to...
      Delivers a huge boost in performance and an awesome soundRigorously dyno-tested to provide maximum horsepower and torque gains
      $159.99
    • (0 reviews)
      # 84197984
      Chevy Blazer 5.0L / 5.7L / 6.6L With Chevy Small Block Engine 1977, Fiber Header Gaskets by Dynatech®. Sold in pairs. Dynatech Fiber Race Gaskets are the premium gaskets demanded by many enthusiasts and racers alike. Specifically...
      Made of High Quality MaterialsNo Leaks
      $15.99
    • (0 reviews)
      # 84197983
      Chevy Blazer 5.0L / 5.7L / 6.6L With Chevy Small Block Engine 1977, Standard Port Gasket Kit by Dynatech®. 1 Pair. Dynatech Fiber Race Gaskets are the premium gaskets demanded by many enthusiasts and racers alike. Specifically...
      Made of High Quality MaterialsSold in Pairs
      $15.99
    • (0 reviews)
      # 102175018
      Chevy Blazer 5.0L / 5.7L / 6.6L 1977, Exhaust Header Gasket by Mr. Gasket®. Ultra-Seal. Includes Header Exhaust, Collector Flange Gasket, Header and Collector Flange Bolts. Whatever exhaust system you install on your engine,...
      Gaskets for every application, from mild to wildAluminum, copper or steel gaskets
      $30.57
    • (0 reviews)
      # 102174874
      Chevy Blazer 1977, Exhaust Gasket Set by Mr. Gasket®. Whatever exhaust system you install on your engine, whether it’s a set of chromed headers or simply a set of cleaned up flat black rams horn manifolds, you’ll need gaskets...
      Gaskets for every application, from mild to wildAluminum, copper or steel gaskets
      $13.23 - $42.99
    • (0 reviews)
      # 102174785
      Chevy Blazer 1977, Ultra-Seal™ Exhaust Gasket Set by Mr. Gasket®. Whatever exhaust system you install on your engine, whether it’s a set of chromed headers or simply a set of cleaned up flat black rams horn manifolds, you’ll...
      Gaskets for every application, from mild to wildAluminum, copper or steel gaskets
      $20.37 - $32.61
    • (0 reviews)
      # 12051379
      Chevy Blazer 1977, Exhaust Header Gaskets by Spectre Performance®. Package Quantity: 2. Includes: 2 Gaskets. Rooted in racing, Spectre Performance designs and builds every product with the same goal in mind - the best performance...
      High-tech engine parts for the most power and best performanceThe finest exterior and interior parts for superior appearance and functionality
      $8.52 - $19.91
    • (0 reviews)
      # 199845945
      Chevy Blazer 1977, Vibe-Lock Header Bolt Kit by Taylor Cable®. This products is an OEM and Performance company that was built on its founding heritage supported by a tradition of Legendary Quality. Designed utilizing the latest...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $16.38 - $91.82
    • (0 reviews)
      # 17594590
      Chevy Blazer 1977, Exhaust Gasket by Edelbrock®. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. Edelbrock's gaskets are not only manufactured from extremely high...
      Fast shipping; 1-2 day delivery time regardless of where you’re locatedThe finest quality at a great price
      $14.16 - $16.95
    • (0 reviews)
      # 81473219
      Chevy Blazer 1977, MLS Exhaust Head Gasket by Cometic Gasket®. Cometic MLS Gaskets are comprised of multiple layers of stainless steel providing a even load across the sealing surface. The embossed outer layers of the gaskets meet...
      Made of High Quality MaterialsBuilt to Last
      $19.13 - $61.23
    • (0 reviews)
      # 87265823
      Chevy Blazer 1977, Header Flanges by Schoenfeld Headers®. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This product is designed with utmost care and meticulous...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $36.21 - $140.34
    • (0 reviews)
      # 87265812
      Chevy Blazer 1977, Header Gasket by Schoenfeld Headers®. 1 Piece. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This product is designed with utmost care and meticulous...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $11.23 - $16.15
    • (0 reviews)
      # 116540604
      Chevy Blazer 1977, Manifold Gasket Set by Magnum Gasket®. You'd better be ready to take the heat if you're going to seal an exhaust manifold, where temperatures can often exceed 1,000°F. You can count on Magnum to offer the best...
      Made of High Quality MaterialsThe best combination of steel layers and high-temp gasket materials
      $9.35 - $11.22
    • (0 reviews)
      # 102174802
      Chevy Blazer 1977, Stainless Steel Exhaust Header Bolt by Mr. Gasket®. Size: 3/8"-16 x 0.75". Whatever exhaust system you install on your engine, whether it’s a set of chromed headers or simply a set of cleaned up flat black rams...
      Gaskets for every application, from mild to wildAluminum, copper or steel gaskets
      $25.47 - $31.59
    • (0 reviews)
      # 95687542
      Chevy Blazer Chevrolet Engine 1977, Header Bolt Kit by ARP®. Thread Size: 3/8. Package Type: Skin. ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular...
      Designed to unlock more performance out of your vehicleDeliver a reasonable balance of strength and durability
      $20.80 - $161.63
    • (0 reviews)
      # 91576082
      Chevy Blazer 1977, Standard Head Header Bolts by Trans-Dapt®. Standard header bolts, from Trans-Dapt Performance Have a 7/16" head size for use with headers. For even tighter fitting applications, use Trans-Dapt's Small head bolts...
      Expertly crafted from premium materialsDesigned to match rigorous quality standards
      $6.56 - $8.36




    Guides & Articles

    • Performance Exhaust Systems
      Here's A "Tip": Exhaust Tips Are An Easy Way To Dress Up Your Tailpipe
      Performance exhaust systems give you improvements in power output, sound levels, and appearance, all in one package. But let's face it: not everyone has the spare change to buy and bolt up one of these kits. So you soldier on with what you have. And that may be a tired-looking exhaust system that is still functional. You've spent all day washing and waxing the vehicle's paint and chrome to perfection, but no degree of elbow grease will make that tailpipe look better.
    • Performance Exhaust Systems
      Are Headers Worth The Performance Improvement?
      Engines have often been compared to air pumps, because the engine that’s most efficient in terms of economy and power is the one that can get air in and out of its cylinders the easiest. That’s why most performance modifications like conical air filters, cold air intake systems, headers, and cat-back exhaust systems are aimed at making the intake and exhaust systems less restrictive. These parts increase the flow of air into the engine and ease the flow of exhaust gas out of the engine. Among these components, headers may be the most difficult to install. In this article, we’ll discuss what headers do, their different types, and how much performance they can add to your car.
    • Performance Exhaust Systems
      Are X-pipes and H-pipes Better Than Straight Pipes on Dual Exhaust Systems?
      You may be wondering why so many aftermarket performance exhaust system manufacturers are offering dual exhaust systems connected by "H-pipe" or "X-pipe" sections. After all, aren't two separate pipes, or so-called "true duals", the best for performance? The answer is no, but to understand why we have to examine how a typical internal combustion engine works.
    • Performance Exhaust Systems
      Power, Sound, Looks | Can I Have It All With a Cat-Back Exhaust System?
      It's an age-old question that many have asked. Will an aftermarket exhaust be worth the expense? While they definitely can be, an important question to ask yourself is do you care more about the deeper sound they’re designed to produce, or the added performance gained from being less restrictive? As car enthusiasts, we’ve become accustomed to associating the sound of a car with its exhaust. After all, doesn’t everyone have a childhood memory or two of a car and the particular sound it made?
    • Bed Accessories
      Pickup Truck Cab And Bed Sizes Are Important When Selecting Accessories
      Americans love to have choices. Buying a dress shirt? Decide solid or stripe, short or long sleeve, cotton or poly blend, button or spread collar, regular fit, slim fit, or big & tall. How about a meal at your favorite steak house? Will it be porterhouse, T-bone, or sirloin? Cooked rare, medium-rare, or medium? With baked, mashed, or French fried potatoes? Thirsty for a fancy cup of coffee? Let's not even get started on options that let you end up with a "grande caramel macchiato with 1% low-fat milk, 2 Splendas, and an extra espresso shot".
    • Replacement Exhaust Parts
      Direct Fit vs. Universal Mufflers
      Regardless of whether you're shopping for a simple replacement muffler that delivers original equipment (OE) sound and performance or an upgraded muffler which provides a deeper growl with increased power through freer exhaust flow, you'll see choices between "direct fit" mufflers and "universal" mufflers. In this article, we'll help you understand the differences between these two styles so you can make a more informed purchase.

    Popular Products

    1977 Chevy Blazer Performance Exhaust Systems Reviews

    Average rating:  4.5  4.5 - 24 reviews
    5 of 5
    Just What I Needed
    As described and at the right price. Easy, fast delivery. A great buy!
    SPosted by Susan (Smith River, CA) /
    Was this review helpful for you? Yes
    View More
    Related 1977 Chevy Blazer Pages
    1977 Chevy Blazer Models
    SECURE SHOPPING

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
    It is neither inferred nor implied that any item sold by CARiD.com, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.