Chevy Monte Carlo V8 1975-1976, Distributor Cap by Taylor Cable®. With HEI. Periodic replacement of your distributor cap and rotor will keep your car running at peak efficiency. They should both be replaced at the same time.
- Made from alkyd molding
- Superior protection from cross firing and arcing
- Compression molded caps
- Corrosion resistant brass inserts
- High conductivity and unrestricted energy flow
- Made in the U.S.A.
The distributor takes the high voltage from the coil and parcels it out to the spark plugs. The rotor spins around like a top inside the cap, making contact with the towers that connect to the plugs as it spins. This carefully-timed ballet makes the spark travel to the correct plug in the firing order, and none other. Carrying voltages higher than a Taser, and operating in the extremely hot and dusty environment under the hood, it’s no wonder the distributor cap needs to be replaced at regular intervals. When the insulation on the alkyd plastic cap starts to deteriorate, it can let some or all of the energy in the spark escape, robbing the spark plug, and making for misfires. While cleaning a dirty cap can help for a while, eventually the dielectric coating breaks down from heat and ozone, and becomes electrically conductive. The only fix is to install new parts. Fortunately, replacing the distributor cap is easy. Just remember to change the plug wires one at a time, so you don’t get them crossed. And you probably should replace the rotor at the same time.
Taylor Cable®, also known as TaylorVertex, is based in Missouri, and has been in the auto parts manufacturing business since 1923. With over 100,000 square feet of manufacturing and warehousing space, they build all of their components right here in the USA. They’ve also operated Vertex Magnetos, the racing legend, since 1994. Their continuing dedication to quality manufacturing, product development make them an important supplier here at CARiD.