- Product
Details -
Chevy Malibu Convertible / Hardtop / Sedan 1966, Tail Panel by GoodmarkŪ. Trunks and Tailgates are at the rear of cars and trucks, but that doesn't mean they're any less vulnerable to damage. Many an inattentive driver has dented the trunk or tailgate of the vehicle in front of them, and most tailgates and trunks on classic cars and trucks are especially vulnerable to rust. If you want to make your car or truck like new, don't bother with used panels or cheap replacements; get authentic reproduction sheet metal from the restoration experts at Goodmark.
Features:
- Faithful reproduction of the original part
- Highest quality sheet metal parts available
- Designed with the latest software and manufactured using modern tooling
- The same dimensions as the original factory replacement part
- The same gauge sheet metal as original equipment
- The largest supplier of sheet metal parts in the GM Restoration Parts Program
After decades of exposure to the elements and bad drivers, the trunk or tailgate on your classic car or truck is probably rusted, dinged or dented. And since most trunk lids and tailgates are flat, don't take a chance with a used panel because every flaw will end up showing through the paint. To make your car or truck factory new, you need genuine reproduction sheet metal from Goodmark.
Restoring cars isn't just a business for the people at Goodmark, they're also car enthusiasts and restorers just like you, and they wouldn't make anything they wouldn't install on their own cars or trucks. Each trunk or tailgate is CAD/CAM designed to make sure it exactly replicates the original part, and then it's manufactured with the most modern tooling. Each design is test fit to make sure it looks and fits perfectly. Many Goodmark parts have been approved by the manufacturers of the original equipment and are licensed to be sold as genuine replacement parts.
Because of its close proximity to the rear quarter panels and wheelhouses, the trunk area is known for rust and rot. You may have to peel back the trunk mat, but the damage is usually there. Goodmark has an extensive selection of trunk floor panels and trunk floor patch panels for most popular classic cars and trucks to make your trunk solid again. Besides dings and dents, trunk lids and tailgates are also susceptible to rust at their lower edges. Regardless of the type of damage, Goodmark has accurate reproductions of these panels that will make your vehicle look factory original.
Besides these major panels, Goodmark also has a wide range of hinges, weatherstripping, latches, strikers, lock cylinders, moldings and emblems to make the back of your vehicle perfect.
Brand: Goodmark Part Number: GMK403185066 UPC: 840314020536
Goodmark was founded in 1991 by car enthusiasts, restorers and collectors just like you. They recognized that there was a need for quality restoration parts, especially sheet metal parts, if the restoration of our beloved American classics was to continue. Since that time, Goodmark has created a complete line of sheet metal, trim parts, and accessories for popular cars like the Chevrolet Camaro and Ford Mustang, and for previously difficult to restore cars like the Dodge Challenger and Plymouth Barracuda. Goodmark uses CAD/CAM (computer aided design and computer aided manufacturing) software and modern tooling and manufacturing techniques to create parts that are identical to factory original for perfect fit and finish. Quality parts tooled and manufactured by Goodmark are enabling many more American classic and muscle cars to return to the road, looking just as fine as the day they rolled off the assembly line.
GOODMARKŪ - Tail Panel Reviews (10)Every Customer can leave a review about our service and the product that was purchased. In order to leave your review for your new product, please follow the link in the email you receive after completing your purchase. You can rate appearance, ease of installation, price/value and product quality.
Customers' rating:
4.5 OF 5
APPEARANCE
EASE OF INSTALLATION
PRICE/VALUE
QUALITY
All Goodmark Trunks & Tailgates reviews >>
(4)
APPEARANCE
EASE OF INSTALLATION
PRICE/VALUE
QUALITY
Nice PatchMarch 29, 2013 | Posted by Jason R. | 1972 Chevy Monte Carlo (Danville, NH)No issues, but just need to make sure the gap is OK after I put the fender back on the car!
Was this review helpful for you? YesNoShare this review:
(3.5)
APPEARANCE
EASE OF INSTALLATION
PRICE/VALUE
QUALITY
Not BadJanuary 25, 2013 | Posted by Ryan S. | 1992 Pontiac Firebird (Milford, IN)The handle looked fine when I got it out of the box, and it fit where it was supposed to. My only problem with this handle is that it is supposed to be riveted to the door, but that's not a problem with the product, it's just with the design.
Was this review helpful for you? YesNoShare this review:
(4)
APPEARANCE
EASE OF INSTALLATION
PRICE/VALUE
QUALITY
Cowl HoodDecember 20, 2012 | Posted by John K. | 2006 GMC Sierra (Murfreesboro, TN)Hood was shipped standing up with no damage! Great Idea, looks great on 06 GMC truck.
Was this review helpful for you? YesNoShare this review:
(5)
APPEARANCE
EASE OF INSTALLATION
PRICE/VALUE
QUALITY
Replacing Original HoodDecember 11, 2012 | Posted by Rogelio D. | 2003 Ford F-150 (Corpus Christi, TX)This hood made my 2003 Ford Super Crew look like a real boss. I mean it really made a very good upgrade on my truck. It looks like a freaking cobra. Would recommend it to anyone looking to customize their ride. Really pleased with overall look.
Was this review helpful for you? YesNoShare this review:
(5)
APPEARANCE
EASE OF INSTALLATION
PRICE/VALUE
QUALITY
The Door Striker for 1971 MustangNovember 20, 2012 | Posted by Paul C. | 1973 Ford Mustang (Kongsvinger, AA)At first I thought it was a bit expensive, but... It made a total difference in how the door functions on the car. After removing the old striker, I found that it was not only missing the bushing, but also had a hairline crack. After installing the new striker, a three minute job. Ahh.. a job that actually took less time than planned. After some small adjustments, it worked just like a new door. Gives a totally different impression about the entire car, when the door simply goes "Thunk" rather than trying different ways to make it close properly. I bought the car a couple of months ago in Norway. It seems silly, but if the doors don't close properly, you begin to have doubts about other things on the car. So.... A well spent $50 bucks, for a quality product, that really is "Like New." Actually, I am so happy, that I am going to buy another striker, for the other side of the car. My "bad door" is now so much better than my "good door."
Was this review helpful for you? YesNoShare this review:
(4.5)
APPEARANCE
EASE OF INSTALLATION
PRICE/VALUE
QUALITY
NEW Front Fender for my OLD 73 Challenger.October 3, 2012 | Posted by Eddie K. | 1972 Dodge Challenger (Idaho Falls, ID)The part is really good, fits like a glove. The metal is covered with some kind black paint. Don't know whether I should remove it before painting. Shipping and installation - no problems.
Was this review helpful for you? YesNoShare this review:
(5)
APPEARANCE
EASE OF INSTALLATION
PRICE/VALUE
QUALITY
Camaro 1980 Hood sealOctober 1, 2012 | Posted by Alan P. | 1980 Chevy Camaro (Birmingham, AL)The old hood seal was terrible. Water was penetrating and I didn't notice it timely. Found all I need at CARiD and purchased. Installed with no problems at all. But anyway, the hood already began to rust, so I'll replace it too. Luckily, now I know where to look for parts - thx CARiD.
Was this review helpful for you? YesNoShare this review:
(4.5)
APPEARANCE
EASE OF INSTALLATION
PRICE/VALUE
QUALITY
Very glad!September 21, 2012 | Posted by Jeremy L. | 1986 Chevy Camaro (Harwood, MD)Very glad! The hood is of excellent quality and the fit is perfect too. 4" raised scoop looks sick. Can't wait when I ride around the block. Too bad my Camaro's not on the move - looking for a new engine...
Was this review helpful for you? YesNoShare this review:
(5)
APPEARANCE
EASE OF INSTALLATION
PRICE/VALUE
QUALITY
Quarter panelsSeptember 18, 2012 | Posted by Jeremy S. | 1974 Buick Apollo (Brookland, AR)It was pretty hard to find parts for old school cars. Digged all the Internet before stumbled upon CARiD. Ordered a pair of rear fenders. Shipped fast - the next day after the order. Quarter panels look great, not a single dent or scratch.
Was this review helpful for you? YesNoShare this review:
(4.5)
APPEARANCE
EASE OF INSTALLATION
PRICE/VALUE
QUALITY
Nice Products!September 2, 2012 | Posted by Jack O. | 1966 Ford Mustang (Albany, NY)I was so, so happy to find such a huge amount of parts for my old gen1 Mustang! There are like looots of parts in here. Ordered seals and gaskets for $100 and some body parts for $800. Now, I have app half of the car sent to me!
Was this review helpful for you? YesNoShare this review:
- More
Accessories - Product
Reviews