1965 Buick Le Sabre Performance Suspension

Change Vehicle
1 - 60 of 139 results
show:
sort by:
    • (0 reviews)
      # 17929232
      Buick Le Sabre For Towing Hauling 1965, Max-Air™ Rear Load Adjusting Shock Absorbers by Monroe®. Quantity: 2 per Pack. Length: 14.5" Compressed, 23.75" Extended with 9.25" Stroke. With Rubber Dust Shield. Without Extended Bumper...
      Monotube, Air Adjustable internal designProvide proper vehicle ride height when additional weight is loaded
      $65.39
    • (0 reviews)
      # 17922763
      Buick Le Sabre 1965, Monro-Matic Plus™ Driver or Passenger Side Shock Absorber by Monroe®. Quantity: 1 per Pack. Without Extended Bumper Stop. Without Extended Hydraulic Lockout. Nitrogen gas charged Monro-Matic Plus shocks and...
      Twin-Tube internal designAn ideal balance of comfort and control for any driving condition
      $16.63 - $19.47
    • (0 reviews)
      # 81786670
      Buick Le Sabre 1965, RQ Series™ Driver or Passenger Side Shock Absorber by RideTech®. Quantity: 1 per Pack. Fixed Valve. The RQ (ride quality) Series shocks have been designed and tuned for optimum ride quality in street rods,...
      1/2" hardened shaft is precision ground and straightened to a tolerance of .001" inch for increased durability and performanceBillet end cap with integrated debris wiper to prevent seal damage
      $135.00
    • (0 reviews)
      # 97259381
      Buick Le Sabre 1965, Control Arms by QA1®. Ready to bolt on control arm sets for your Mopar. They feature tubular construction, black powder coat and polyurethane inner pivot bushings. These upper control arms increase caster by...
      Made in the U.S.A.Wear Resistant Design
      $314.96 - $393.88
    • (0 reviews)
      # 81786673
      Buick Le Sabre Full Size 1965, StrongArms™ Rear Control Arms by RideTech®. StrongArms™ are optimized to allow proper camber adjustment at your new lowered ride height without using a large stack of shims.
      Made with precision and quality in mindBuilt to last
      $250.00
    • (0 reviews)
      # 87517649
      Buick Le Sabre THM400 Transmission 1965, Trans-Shield by TCI®. Comes in a kit. Shield made from Aluminum. SFI-approved. TCI® Aluminum Transmission Shields are lightweight and fit over the body of the transmission to offer tough...
      $180.07 - $181.48
    • (0 reviews)
      # 96880524
      Buick Le Sabre 1965, 1.732'' Eccentric Camber Bolt Adjusters by QA1®. Includes: Four eccentric camber bolt adjusters. QA1 offers a variety of suspension components and accessories to complement your shocks for circle track racing....
      Made in the U.S.A.Wear Resistant Design
      $35.17
    • (0 reviews)
      # 11075415
      Buick Le Sabre 1965 Control Arm Bushings by Energy Suspension®. Performance. Material: Polyurethane. Energy Suspension lets you upgrade worn and crumbling rubber bushings that dampen vibrations at mounting points for front upper...
      See Product Options for replacement bushing kits for lower and upper control arms, torsion arms, trailing arms, and track armsHigh-density polyurethane construction provides a superior cushioning effect and resists drying up and crumbling the way rubber mounts can
      $16.17 - $89.68
    • (0 reviews)
      # 11085667
      Buick Le Sabre 1965 Strut and Tracking Arms Bushings by Energy Suspension®. Performance. Material: Polyurethane. Energy Suspension lets you upgrade worn and crumbling rubber bushings that dampen vibrations at mounting points for...
      See Product Options for replacement bushing kits for front and rear strut towers, front and rear track arms, strut arms, and strut rodsSuspension C-bushing kits are available to restore positive camber lost after a vehicle has been lifted 2-4 inches, and over 4 inches
      $13.74 - $15.40
    • (0 reviews)
      # 81785578
      Buick Le Sabre 1965, Front Trunnion Assembly by RideTech®. Includes: Snap Rings. Fits 0.625" I.D. x 0.5" Bearing. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art...
      Made with precision and quality in mindBuilt to last
      $20.00
    • (0 reviews)
      # 9815185
      Buick Le Sabre 1965, Load Controller by Air Lift®. LoadController systems are air compressors that mount permanently on the frame of your vehicle to give you spring inflation pressure wherever you go. Adjustment of your springs is...
      Dual-path design compressors allow left- or right-side springs on the same axle to be controlled independently of each otherHeavy-duty strength compressors are recommended for daily or commercial use, run quieter, and provide better filtration
      $225.00 - $415.00
    • (3 reviews)
      # 9806096
      Buick Le Sabre 1965, Wireless Control by Air Lift®. These kits include a compact wireless remote control and all the equipment you need to adjust the pressure in two air springs on the same axle. Choose the value-priced Equal...
      Equal Air Spring Inflation kit contains a standard air compressor that adjusts left and right springs together at the same time to the same pressureSeparate Air Spring Inflation kit contains a heavy duty air compressor with separate lines that allows individual adjustment of left and right springs
      $367.50 - $524.99
    • (1 reviews)
      # 11071477
      Buick Le Sabre 1965 Front Sway Bar End Links by Energy Suspension®. Length: 2.625". Energy Suspension offers replacement polyurethane bushings for mounting points on shock absorbers, rear Watts Link arms, and sway bar end links....
      Kit provides parts for left and right front sway bar end linksBushing sets include reinforced, zinc-coated steel tubes for mounting
      $16.07 - $16.66
    • (0 reviews)
      # 87256692
      Buick Le Sabre 1965, Front Sway Bar End Links by Prothane®. End Link Set 4-1/4" Mount Length. PROTHANE™ urethane end link kits improve stability, handling and durabilty. If your vehicle uses standard length end links, use this...
      $21.74
    • (0 reviews)
      # 11071482
      Buick Le Sabre 1965 Rear Upper Coil Spring Isolators by Energy Suspension®. Performance. Material: Polyurethane. Energy Suspension offers a variety of spring isolators in sets of cushioning pads designed for the tops, bottoms, and...
      Spring Isolators reduce the play and slack that worn OEM rubber spring pads cause – improving handling and stability over all types of road conditionsFront or Rear Coil Spring Lift Isolator kit offers replacement front or rear coil spring pads with greater built-in height to raise overall vehicle ride height by 1.75 inches over stock
      $7.68
    • (0 reviews)
      # 34631625
      Buick Le Sabre 1965, Front Coil Spring Insulator by Sherman®. Make your vehicle perfect in every detail with Sherman products designed with ultimate quality and durability in mind. Reliable function that will meet your exacting...
      Constructed to deliver trouble-free performanceMade from quality materials to provide maximum reliability
      $17.33
    • (0 reviews)
      # 56794957
      Buick Le Sabre 1965, Torsion Bar Adjusters by QA1®. Includes: 2 torsion bar adjusters. QA1 offers a variety of suspension components and accessories to complement your shocks for circle track racing. From coil-over kits to bump...
      Made in the U.S.A.Wear Resistant Design
      $97.06
    • (0 reviews)
      # 17910209
      Buick Le Sabre 1965, OESpectrum™ Driver or Passenger Side Shock Absorber by Monroe®. Quantity: 1 per Pack. Without Extended Bumper Stop. Without Extended Hydraulic Lockout. These shocks and struts are engineered for foreign...
      Provide unprecedented handling precision and controlNitrogen gas charged
      $23.28 - $27.57
    • (0 reviews)
      # 17797362
      Buick Le Sabre 1965, Gas-a-Just™ Rear Driver or Passenger Side Shock Absorber by KYB®. Quantity: 1 per Pack. Compressed Length: 14.53". Extended Length: 23.78". Go with Gas-a-Just shocks and struts and experience greater...
      Replacement for an OE monotube shock to restore/keep the vehicle's original performance characteristicsIdeal as an upgrade from an OE twin-tube for quicker, more responsive handling and control
      $30.13
    • (0 reviews)
      # 64103663
      Buick Le Sabre 1965, Advantage Super Touring™ Rear Passenger or Driver Side Shock Absorber by Sachs®. 1 per Pack. SACHS shock absorbers distinguish themselves through original equipment quality and innovative technology. They...
      $29.24
    • (0 reviews)
      # 86110902
      Buick Le Sabre 1965, Advantage™ Front Gas Charged Shock Absorber by ACDelco®. 1 per Pack. Designed utilizing the latest technology, this product by ACDelco features premium quality and will perform better than advertised. Perfect...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $22.25
    • (0 reviews)
      # 21653294
      Buick Le Sabre 1965, Coil Spring Set by MOOG®. 2 per Pack. Upgrade your vehicle to MOOG coil springs that are designed to restore the original handling, reduce body sway and bring ride height to OE specifications. These coil...
      Direct fit, with no modificationsRestores and retains proper handling
      $54.85 - $97.65
    • (0 reviews)
      # 38312248
      Buick Le Sabre 1965, Front Lower Ball Joint by MOOG®. 1 per Pack. Press-in Type. Greasable. Includes: Powdered-Metal Gusher Bearing to Allow Grease to Penetrate Bearing Surfaces. MOOG ball joints are the preferred choice of many...
      Engineered to retain socket torque and smooth articulation over the life of the part, to maintain tight steering feelExclusive powdered-metal bearing design allows grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
      $47.80
    • (0 reviews)
      # 64618981
      Buick Le Sabre 1965, Premium Front Lower Ball Joint by Centric®. The company has one of the industry’s best programs for tracking and cataloging original equipment, and devising quality aftermarket and OE parts for consumers,...
      Intended for a comfortable driving experienceExpertly crafted from premium materials
      $42.65
    • (0 reviews)
      # 52884322
      Buick Le Sabre 1965, Front Sway Bar Link Kit by TRW®. Does your luxury car ride like an old buckboard wagon? Is your pickup still bouncing long after the bump? If so your suspension is in need of repair, but before you waste your...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $11.23
    • (0 reviews)
      # 68741813
      Buick Le Sabre 1965, Premium Front Stabilizer Bar Link by Centric®. The company has one of the industry’s best programs for tracking and cataloging original equipment, and devising quality aftermarket and OE parts for consumers,...
      Intended for a comfortable driving experienceExpertly crafted from premium materials
      $6.44 - $9.94
    • (0 reviews)
      # 79109712
      Buick Le Sabre With Standard Brake Package 1965, Front Stabilizer Bar Bushing Kit by Centric®. The company has one of the industry’s best programs for tracking and cataloging original equipment, and devising quality aftermarket...
      Intended for a comfortable driving experienceExpertly crafted from premium materials
      $6.44
    • (0 reviews)
      # 79238133
      Buick Le Sabre 1965, Premium Rear Coil Spring Insulator by Centric®. The company has one of the industry’s best programs for tracking and cataloging original equipment, and devising quality aftermarket and OE parts for consumers,...
      Intended for a comfortable driving experienceExpertly crafted from premium materials
      $3.52
    • (0 reviews)
      # 109989249
      Buick Le Sabre 1965, Strut-Mate™ Front Shock Boot Kit by Monroe®. The boot kit is designed to protect the strut piston rod from stones, mud, water, sand, and other abrasives providing longer service life for the strut. In...
      Protects the piston rod from corrosion, dirt, moisture and impact.Prolongs strut service life
      $7.22
    • (0 reviews)
      # 19205203
      Buick Le Sabre 1965, Front Sway Bar Link Kit by Mevotech®. Quantity: 2 per Vehicle. Upgrade to the sway bar link kit by Mevotech and keep your vehicle stable, enjoying a more comfortable ride and better road handling. All parts are...
      Designed to improve the vehicle's cornering stabilityDirect fit OE replacement
      $3.31 - $8.22
    • (0 reviews)
      # 49488352
      Buick Le Sabre 1965, Front Stabilizer Bar Link Kit by Falcon®. 2 per Vehicle. Falcon steering sway bar links are designed to last longer than typical aftermarket sway bar links. Improvements made in the rubber on Bolt and bushing...
      High strength steel boltsGuarantees good performance under high loads
      $5.22
    • (0 reviews)
      # 57028892
      Buick Le Sabre 1965, Premium™ Front Stabilizer Bar Link Kit by MOOG®. 1 per Pack. Includes: Polyurethane Bushings and Solid Metal Sleeve for Enhanced Performance. Barrel Nut Allows for Easier Installation. Upgrade your vehicle to...
      Designed to make steering and suspension repairs easyDirect fit
      $8.80
    • (0 reviews)
      # 38312148
      Buick Le Sabre 1965, Stabilizer Bar Bushing Kit by MOOG®. At Front to Frame. 2 per Pack. Diameter: 0.75". Replace your worn or damaged bushings with stronger and longer-lasting bushings from MOOG that effectively absorb substantial...
      Restore handling and enable proper alignmentReduce noise
      $9.76
    • (0 reviews)
      # 69953380
      Buick Le Sabre 1965, Advantage™ Front Stabilizer Bar Link Kit by ACDelco®. OE Type. Designed utilizing the latest technology, this product by ACDelco features premium quality and will perform better than advertised. Perfect for...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $5.94
    • (0 reviews)
      # 119933236
      Buick Le Sabre 1965, Professional™ Front Stabilizer Bar Link Kit by ACDelco®. Designed utilizing the latest technology, this product by ACDelco features premium quality and will perform better than advertised. Perfect for your...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $15.61 - $21.70
    • (1 reviews)
      # 14251534
      Buick Le Sabre 1965, Air Compressor Isolators by Suncore®. Quantity: 3 per Pack. Compressor Rubber Vibration Isolator kit absorbs the vibration from your air suspension compressor and gets Rid of The Vibration Noise. This Kit...
      Easy to installInstallation instructions included
      $18.75
    • (0 reviews)
      # 98914474
      Buick Le Sabre with 19 mm (3/4") Sway Bar 1965, Front Sway Bar Bushings by Mevotech®. Quantity: 1 per Vehicle. Location: To Frame. Stabilizer bar bushings provide direct transmission of force from the sway bar to the body of the...
      Built to match or go beyond OE standardsDirect replacement
      $6.60 - $7.62
    • (0 reviews)
      # 64645401
      Buick Le Sabre 1965, Premium Control Arm Bushing by Centric®. The company has one of the industry’s best programs for tracking and cataloging original equipment, and devising quality aftermarket and OE parts for consumers,...
      Intended for a comfortable driving experienceExpertly crafted from premium materials
      $11.24 - $25.84
    • (0 reviews)
      # 79241535
      Buick Le Sabre 1965, Premium Stabilizer Bar Bushing by Centric®. The company has one of the industry’s best programs for tracking and cataloging original equipment, and devising quality aftermarket and OE parts for consumers,...
      Intended for a comfortable driving experienceExpertly crafted from premium materials
      $8.80 - $9.36
    • (0 reviews)
      # 38312425
      Buick Le Sabre 1965, Improved Design Front Strut Rod Bushing by MOOG®. 1 per Pack. Replace your worn or damaged bushings with stronger and longer-lasting bushings from MOOG that effectively absorb substantial loads and are less...
      Restore handling and enable proper alignmentReduce noise
      $25.85
    • (0 reviews)
      # 21644969
      Buick Le Sabre 1965, Rear Coil Spring Insulator by MOOG®. 2 per Pack. Diameter: 3.88". Inlet Diameter: 2.13". Upgrade your vehicle to MOOG and experience a safe and comfortable ride. The parts are made tough to ensure reliable...
      Designed to make steering and suspension repairs easyDirect fit
      $5.76
    • (0 reviews)
      # 98914488
      Buick Le Sabre 1965, Coil Springs by Mevotech®. Quantity: 1 per Vehicle. You can improve the efficiency of your vehicle's suspension system and restore factory-like characteristics with Mevotech replacement coil spring. The parts...
      Restore the vehicle's suspension performanceDirect replacement for proper fitment
      $66.04 - $127.23
    • (0 reviews)
      # 135447726
      Buick Le Sabre 1965, Rear Driver or Passenger Side Lower Shock Mounting Kit for Part KG5508 by KYB®. Includes: 2 Nuts, 1 Washer, 2 Lock Washers, 1 Rubber Bushings, 1 Bolt. When replacing struts, it's also a great idea to replace...
      On front struts, the mount includes a bearing that acts as a pivot for the steering mechanism, providing a smooth steering responseEnables accurate wheel alignment
      $8.89
    • (0 reviews)
      # 83552072
      Buick Le Sabre 1965, Suspension Control Arm Bumper by Goodmark®. The doors on classic and muscle cars are different than other body panels in that they can not only suffer from visual deformities like dents and rust, but they're...
      Faithful reproduction of the original partHighest quality sheet metal parts available
      $5.84
    • (0 reviews)
      # 96880639
      Universal 16 Series Aluminum Threaded Body Monotube Circle Track Shock Absorber by QA1®. The 16 Series shock is a threaded large body shock that is built to last at an affordable price. Adjust your gas pressure on-the-fly with the...
      2” O.D. hard anodized aluminum threaded monotube bodyLinear or digressive valving available
      $184.55 - $193.78
    • (0 reviews)
      # 96880801
      Universal 20 Series Sealed Monotube Circle Track Shock Absorber by QA1®. Mounting: Eyelet Bearing/Eyelet Bearing. Are you racing in a series that requires a sealed shock? QA1's 20 Series Sealed Monotube Shock is exactly what you...
      Monotube internal design2" O.D. one piece steel body
      $119.76
    • (0 reviews)
      # 78602466
      Universal 26 Series Steel Monotube Circle Track Shock Absorber by QA1®. Mounting: Eyelet Bearing/Eyelet Bearing. The 26 Series shock is a one piece monotube shock that is well suited for a variety of track conditions or as a...
      2" O.D. zinc plated steel monotube bodyAvailable with Hyperscrew, Sealed Hyperscrew (IMCA Lega) or Schrader Valve
      $134.14 - $156.86
    • (1 reviews)
      # 96881685
      Universal 28 Series Monotube Circle Track Shock Absorber with Expanded Gas Chamber by QA1®. Mounting: Eyelet Bearing/Eyelet Bearing. The 28 Series shock is an expanded gas chamber shock that performs well in various track...
      2" O.D. zinc plated steel monotube bodyExpanded gas chamber for increased feel, traction and performance
      $221.47 - $249.16
    • (0 reviews)
      # 96881959
      Universal 50 Series Steel Large Body Twin Tube Circle Track Shock Absorber by QA1®. Mounting: Eyelet Bearing/Eyelet Bearing. Piston: Digressive. The 50 Series features an in-house machined body with a larger inside diameter for...
      2 1/16" Steel twin tube bodyDeflective disc valving
      $110.17
    • (0 reviews)
      # 78602468
      Universal 51 Series Steel Large Body Twin Tube Circle Track Shock Absorber by QA1®. Mounting: Eyelet Bearing/Eyelet Bearing. Piston: Digressive. Introduced in 2013, QA1's 51 Series is an improved version of the popular 50 Series....
      2 1/16" Steel twin tube bodyDeflective disc valving
      $127.91 - $144.10
    • (0 reviews)
      # 96882094
      Universal 53 Series Stock Mount Steel Twin Tube Circle Track Shock Absorber by QA1®. Piston: Digressive. The new 53 Series is a stock mount twin tube shock absorber. Formerly the FC Series, this shock features hard-anodized...
      2 1/16" Steel twin tube bodyStock mount
      $134.14 - $138.40
    • (0 reviews)
      # 78602469
      Universal 55 Series Steel Chrome Plated Twin Tube Circle Track Shock Absorber by QA1®. Mounting: Eyelet Bearing/Eyelet Bearing. Piston: Digressive. Classic look, classic performance. QA1's 55 Series Chrome Plated Twin Tube Shock is...
      Twin tube design allows the outer tube to be dented without binding the shock2” O.D. chrome plated steel body
      $96.40 - $105.83
    • (0 reviews)
      # 78602470
      Universal 59 Series Steel Large Body Sealed Twin Tube Circle Track Shock Absorber by QA1®. Mounting: Eyelet Bearing/Eyelet Bearing. Stroke Length: 9". Piston: Digressive. A quality, stock appearing, economical choice that is a...
      Twin tube design - The outer tube can get dented without binding the shock.2” O.D. steel body
      $63.43 - $64.55
    • (0 reviews)
      # 78602471
      Universal 60 Series Aluminum Smooth Body Twin Tube Circle Track Shock Absorber by QA1®. Mounting: Eyelet Bearing/Eyelet Bearing. Piston: Digressive. The 60 Series is a smooth body shock commonly used for sprint car applications. As...
      Racer revalveable and rebuildableNon-fading
      $134.14 - $159.40
    • (0 reviews)
      # 78602472
      Universal 62 Series Aluminum Threaded Twin Tube Circle Track Shock Absorber by QA1®. Mounting: Eyelet Bearing/Eyelet Bearing. Piston: Digressive. The 62 Series is a threaded body shock made of lightweight aluminum. Commonly used...
      Large threaded twin tube bodyRacer revalveable and rebuildable
      $133.78 - $143.01
    • (0 reviews)
      # 78602473
      Universal 70 Series Steel Small Body Twin Tube Circle Track Shock Absorber by QA1®. Mounting: Eyelet Bearing/Eyelet Bearing. Piston: Digressive. QA1’s 70 Series shock is just like the 51 Series shock absorber, but smaller. The...
      Small bodySimilar in function as the 51 Series
      $105.38 - $114.97
    • (0 reviews)
      # 78602474
      Universal 75 Series Steel Chrome Plated Twin Tube Circle Track Shock Absorber by QA1®. Mounting: Eyelet Bearing/Eyelet Bearing. Piston: Digressive. A scaled down version of the 55 series, QA1’s 75 Series shock absorber has a...
      1 3/16” Piston is machined and processed per individual valve code specifications1/2” Hard chrome plated, polished piston rod
      $100.59 - $101.02
    • (0 reviews)
      # 78602475
      Universal 82 Series Aluminum Threaded Twin Tube Circle Track Shock Absorber by QA1®. Mounting: Eyelet Bearing/Eyelet Bearing. Piston: Digressive. The 82 Series shock works great in various lightweight racing classes. The threaded...
      Small bodyRacer revalveable and rebuildable
      $134.84 - $187.32
    • (0 reviews)
      # 78602476
      Universal Aluma Matic Threaded Body Shock Absorber by QA1®. If you want the best ride in rodding, but don’t need all of the valving options, QA1’s Aluma Matic non-adjustable shock is the best for you.
      Twin-Tube internal designLightweight Aluminum Body
      $151.98 - $155.94
    • (0 reviews)
      # 96880986
      Universal Driver or Passenger Side 23 Series Sealed Monotube Circle Track Shock Absorber by QA1®. Piston: Linear. Quantity: 1 per Pack. By popular demand, QA1 now offers the first sealed stock mount monotube available with custom...
      Monotube internal designSteel stock mount body
      $119.76 - $126.17




    Guides & Articles

    • Off-Road Bumpers
      Skid Plates Provide The Ultimate In Off-Road Protection
      If you take your 4x4 off-roading, you have likely gained an appreciation of how unforgiving trails can be when it comes to your vehicle's underside. Deep ruts with rough edges can appear out of nowhere, sturdy-looking rocks can shift unexpectedly, and tranquil bodies of water can hide everything from sinkholes to fallen tree trunks. Before you know it, the underside of your truck has bounced off something hard enough to damage moving suspension components or puncture housings containing engine oil, gasoline, transmission fluid, or differential gear oil.
    • Performance Suspension Parts
      How much lift is needed for larger tires on my 2007-up Jeep Wrangler?
      Twenty years after the first Jeep Wrangler model debuted in 1987, third-generation Wranglers were introduced for the 2007 model year. Unlike any previous Wranglers or CJs, a 4-door Unlimited model (known internally as the "JKU" body) was offered alongside the standard 2-door ("JK" body). Because it took the off-road capability Wranglers are known for and broadened it with the practicality of 4 doors for those needing a family vehicle, third-generation Wranglers have proven very successful in the marketplace. Maintaining Jeep tradition, this Wrangler appeals by offering a higher-than-average number of advantages for the 4x4 enthusiast, whether it's used for rock crawling or as an everyday driver.
    • Performance Suspension Parts
      Coilovers Are Pricey - Why Would I Spend My Money For Them?
      When first glancing through the Performance Coilover Kits section of our website, you may be put off by some of the prices you see. After all, what are you buying other than a combo set of springs and shocks under some fancy name? Certainly, you ask yourself, can't you purchase springs and shocks separately and monetarily come out ahead?
    • Performance Suspension Parts
      Body Lifts & Suspension Lifts From 2 to 10 Inches | What are my Lift Kit Choices?
      Has this happened to you? You catch a glimpse of a truck like yours in a parking lot or around town that, for some reason, you like better than your own. It seems to have a stance that's more rugged-looking and more suited to a 4x4 than yours does. Maybe you get a chance to stop and take a closer look immediately, or maybe it's days or weeks before you see the other truck again.
    • Automotive Tools
      What Special Tools Are Available For Suspension Repair?
      Seasoned professional automotive technicians often say if you're using too much physical effort during a repair, you're simply not using the right tool. This is true, and a perfect example is repairing and replacing suspension components. If you've ever done this type of work or attempted to do it, you know it can be trickier than merely loosening and tightening bolts.
    • Performance Suspension Parts
      Coil, Leaf, & Torsion Bar | Describing The 3 Different Kinds of Springs
      The springs in your vehicle probably aren't something you think about until there's a problem or you've decided to upgrade suspension parts in the interest of sportier handling. But what specifically do springs do? In short, they play a major role in the safe handling and ride comfort of your vehicle. Not only do they keep a vehicle at a designated standing height, they provide recoil necessary to bounce back after suspension components move up and down over uneven road surfaces. By themselves, springs will continue to bounce up and down for a long time unless a motion damper such as a shock absorber is present to keep things stable. Springs can be soft and extremely bouncy, or they can be stiffer and less bounce-prone.
    • Performance Suspension Parts
      How Do Shock Absorbers Work?
      Shock absorbers (also known as "shocks") are the suspension components which slow, then stop, the up-and-down bouncing movement of your vehicle's springs through a process known as dampening. Without shocks to calm things down, springs will continue to extend and release energy they absorb from bumps in the road at an uncontrolled rate - bouncing for a long time until their kinetic energy finally dissipates. Needless to say, this would produce an extremely bouncy ride that would be hard to control over uneven road surfaces.
    • Performance Transmission Parts
      Suspension Enhancements Will Raise The Rear Of Your Tow Vehicle
      If you are using your "daily driver" car or truck for occasional towing duty, you are looking for that ideal sweet spot where the weekday commute is comfortable and quiet, and the weekend trailering feels solid and secure. In other words, you don't want to vehicle to feel too "stiff" during the week, nor do you want it to ride "soft" when pulling a trailer.
    • Wheels & Rims
      Stanced Wheels, Demon Camber | How Do I Get That Look?
      Stanced. Demon camber. You may know it as oni-camber. You've seen the look, and whether you like it or not is totally beside the point. The great thing about this stanced look is that it gets your attention. From the interviews we've read with owners and drivers of these machines, that is exactly what they are after. They've said that it's all about being noticed.
    • Performance Suspension Parts
      Stock vs Performance Suspension
      Very often we don't even realize what a crucial role a car's suspension plays in providing a safe and comfortable ride. The system maximizes the friction between the road surface and your vehicle's tires, ensuring steering stability along with responsive handling.
    • Performance Suspension Parts
      Shocks Versus Struts: The Big Answers Revealed!
      Shock absorbers, also known simply as “shocks” (which is what we will call them for the rest of this article), are the suspension components which stop your car or truck from bouncing up and down after hitting a bump. They are a major contributor to your ride comfort and safety.
    • Replacement Suspension Parts
      How to Inspect Your Suspension System
      The very first thing to know about timely suspension system diagnosis is that the stability and steering control of your vehicle and, what is more important, your safety on the road depends on how often you make it. Automotive suspension belongs to one of those car systems that are constantly exposed to high loads and thus are prone to wear and tear. Most specialists recommend inspecting suspension system after every 6,500-7,500 miles or when there are any signs of its breakage.
    • Performance Suspension Parts
      How Low Can You Go?
      Lowering is high on the list of many people who want to improve the appearance of their car. If you want to lower your car with the coil springs, then replacing them with lowering springs is the way to go. But what if you want to lower your car and also make it handle better? If that’s your goal then consider coil-over shocks.

    Popular Products

    1965 Buick Le Sabre Performance Suspension Reviews

    Average rating:  5  5 - 10 reviews
    4.8 of 5
    Good Product
    I needed new shocks for my car so I bought QA1 28 series shock absorber. Durable construction, great looks and perfect fit. My car now handles much better without any sacrifice to ride quality.
    JPosted by John (Troy, MI) /
    Was this review helpful for you? Yes
    View More
    Related 1965 Buick Le Sabre Pages
    1965 Buick Le Sabre Models
    SECURE SHOPPING

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
    It is neither inferred nor implied that any item sold by CARiD.com, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.