The best way to clean these covers will be obtained in normal room temperatures (68-85 degrees Fahrenheit).
Please use a non-toxic, liquid, bio-degradable cleaner, clean soft cloth or sponge.
Use a high suction vacuum cleaner to remove as much loose dirt and contaminates as possible from either side.
Wipe the seat cover area to be cleaned with a water-soaked clean soft cloth or sponge.
Either spray or immerse the soiled area of the seat cover in the proper mixture of cleaner.
Work into the fabric with another clean, soft cloth or sponge until the soiled area has released the soil/contaminates.
Dry the cleaned area with a dry soft clean cloth and allow to air dry. You can speed up the drying process with an air blower set on "cool" only.
Obtain a non-toxic liquid or powder fabric cleaner recommended for laundering a variety of fabrics. Following the mixing instructions on the cleanerâ„¢ package, prepare a container suitable for soaking (sink, basin, etc.) and fill with cold or warm water (not to exceed 85 degrees Fahrenheit).
Soak the Cover in this mixture for a period of five (5) minutes to loosen the embedded dust and dirt particles.
After soaking for five minutes, wash the cover thoroughly with a gentle agitation for five minutes. Rinse your cover by using cold water for five minutes.
Flat dry the cover against an absorbent dry cloth to soak up excess water. DO NOT wring cover.
Allow to air dry, either by placing flat on a dry surface or by air drying. You may speed up the drying process with an air blower set on "cool" only.