ActionTrac™ powered running boards are the next generation of automatic, power running boards. They are unique from other power side steps because they feature a patented step-within-a-step™ design - two steps in one.
ActionTrac™ running boards also feature no-splice wiring and a no-drill bracket installation on most models, as well as powder-coated aluminum construction, making them the perfect side steps for offroad trucks and Jeeps.
The step-within-a-step™ design of ActionTrac™ powered running boards makes them the perfect lifted truck steps. There is one 4" non-skid step on top of the main housing and one 3" step that deploys automatically as needed.
When the door opens, the control module deploys the electric step 8" below the top step and up to 15” below the inside of the doorsill, depending on the model. This provides safe, convenient access to the vehicle, especially on larger trucks, Jeeps and SUVs that are built for offroading. It is also ideal for families with young children and for elderly passengers.
When the door is closed again, these lifted truck steps retract, providing plenty of ground clearance for the offroad trail.
With the innovative step-within-a-step™ design, ActionTrac™ powered running boards offer a uniquely contoured look against the vehicle. Rather than folding up underneath the vehicle, the power steps fold into the housing which provides additional side protection for the vehicle.
ActionTrac™ running boards contour to the rocker panels, helping to block small stone and other debris kicked up by the tires from scratching and marring the vehicle’s finish. Additionally, when the vehicle is parked, the running boards provide an extra defense against door dings from other vehicles.
Each set of ActionTrac™ powered running boards is equipped with an integrated control module for safe entry and exit. During operation, the control module detects any obstructions in the path of the power step. This immediately pauses operation, eliminating the risk of pinch hazards and avoiding damage to the steps from rocks and other obstacles.
For additional safety, the main housing has built-in LED lights that illuminate the power step upon deployment, providing convenient visibility in dark conditions.
ActionTrac™ powered running boards are designed to offer a custom fit on your truck, SUV or Jeep Wrangler. They install with vehicle-specific brackets and use pre-existing holes in the vehicle to eliminate the need for drilling (some Ram models excluded). Unlike other power side steps, ActionTrac™ retractable running boards also do not require alignment and will not bind during operation.
ActionTrac™ running boards are also the easiest to install power steps on the market in terms of electrical. They connect directly to the vehicle's battery in a self-contained system that requires no splicing into factory wiring.
Just like your truck, Jeep or SUV, these power running boards are built for the off-road. They are assembled right here in the USA with extruded 6061-T6 aluminum, making them highly durable, yet lightweight and corrosion-resistant.
For added protection against corrosion, scratches and marring, they also come with a durable carbide black powder coat finish.
ActionTrac™ powered running boards operate with a single rotary motor, contained within the main housing. This single motor allows the electric steps to remain quiet and maintenance-free, while still offering fast, smooth operation.
The motor, pivot points and all of the electrical components are shielded within the main housing, keeping them well protected against the elements and ensuring long-lasting reliability.
Whether it's a commercial contract or simply a backyard project, mastering the job requires a solid first step. While most running boards offer extra style for your truck, few of them possess the durability and longevity to stand up to the rigors of the jobsite.
ARIES RidgeStep® running boards are designed to master tough jobs and make it look easy. They feature an all-steel construction, angular look, longwearing treads and no-drill installation.
Unlike most other truck side steps, RidgeStep® running boards are built without any plastic parts. From their angular boards and end caps, to their brackets and punched-hole treads, they are constructed from high-strength steel.
An all-steel construction not only provides a solid step up into the truck, but it also makes RidgeStep® running boards an ideal fit for the harsh conditions of the jobsite. You can spend more time getting quality work done and less time worrying about the survival of your truck accessories.
RidgeStep® running boards feature a 6-1/2" wide surface for a safe, comfortable step up into your truck. They also have stamped steel treads, not plastic step pads. The treads have a punched, protruded, circular design to lock onto your boots as you climb in.
Because the protruded treads are made from steel, they are also highly wear-resistant. They won't wear down or crack like some cheaper, plastic alternatives, even when exposed to steel-toe shoes, heavy foot traffic and UV rays.
To keep your work truck from becoming all utility and no class, RidgeStep® running boards feature a tough, no-nonsense look. They offer dependable footing and extra style. The angular design complements the aggressive body lines of modern trucks.
Like the boards, the end caps of RidgeStep® running boards are entirely made from steel. They are welded into place for a durable accent, and they contour to the sides of the truck for a bold look.
To make sure RidgeStep® running boards can outlast the elements, Aries cover them in a tough, tested finish. They use a dual-layer finish of E-coat and textured black powder coat to easily resist water, salt and rust, and increase slip resistance for added safety.
The textured surface is also uniquely designed to help hide grime and minor scratches on the boards, maintaining a clean, professional finish. RidgeSteps® are also equipped with built-in splashguards along the inside edge to keep the steps free of mud and debris no matter where the job takes you.
RidgeStep® running boards install using innovative VersaTrac® mounting system. Vehicle-specific brackets bolt onto the vehicle using factory mounting points for no drilling required. The boards then bolt onto the brackets using a channel system for easy adjustment.
The VersaTrac® system is used on a number of ARIES running board options. With the vehicle-specific brackets installed, various running boards may be attached, giving you more freedom to customize your truck based on personal preferences or the changing seasons.
RidgeStep® running boards are not just for work trucks. Aries also offer unique configurations for commercial cargo vans. These running boards are available in short / long configurations to accommodate the layout of full-size vans.
RidgeStep® running boards for vans feature the same high-strength, all-steel construction as their truck applications. The textured powder coat finish is perfect for frequent exposure to the elements, especially on delivery vans.
From custom truck builds or commuter SUVs, ARIES 6" oval side bars offer safety, functionality and classic styling. Their design is based off popular original equipment nerf bars, featuring an expansive tube profile, bold end caps and generous, non-skid step pads.
ARIES 6" oval side bars are available in two finish options to perfectly suit the look of your truck. They also install with no drilling required for seamless, OE-like integration.
ARIES 6" oval side bars are all about mimicking the look, feel and functionality of popular original equipment nerf bars. As such, they feature an OE-style tube profile. The 6" wide oval tubes offer a sleek, clean accent on the truck, while providing a comfortable, rigid stepping surface.
These truck steps are also accented with bold, black end caps. The end caps are angled for a more contoured look, and they are constructed from hard ABS plastic to resist cracking and UV damage.
To ensure optimal integration with the existing look of your pickup truck or SUV, ARIES 6" oval step bars are offered in two material / finish options.
Stainless steel side bars are made with 304 stainless - a high-nickel, highly rust-resistant steel alloy that easily outlasts rain, snow, dirt and road salt. These truck steps are finished with a polished, mirror-like shine.
Black side bars are constructed from aluminum alloy to be lightweight and rust-free. They offer a bold look on your truck or SUV with their durable semi-gloss black powder coat finish.
ARIES 6" oval side bars provide a safe, dependable step up into your truck or SUV with their extra-wide, non-skid step pads. The step pads measure 5" wide, providing a comfortable stepping surface. They are also extra-long to ensure non-skid footing right where you need it.
The step pads of ARIES 6" oval side bars are made from tough, molded poly for long-lasting crack, wear and UV resistance.
For easy customization and installation, ARIES 6" oval step bars are made for a vehicle-specific fit. For each truck or SUV application, a unique pairing of running boards and brackets are used. The brackets mount with no drilling required, and the boards have a track system for easy adjustment.
ARIES 6" oval side bars mount with high-strength steel brackets to ensure a rigid step. The brackets are also covered in a durable powder coat finish for long-lasting rust resistance.
There are a lot of running board options out there, but how many of them truly allow your truck to stand out from the pack? ARIES AdvantEDGE™ side bars do away with the common, rounded look of other truck running boards, featuring a unique profile, an angular design and an all-aluminum construction. They're also available in two finish options.
AdvantEDGE™ truck steps give you that aggressive, aftermarket look with the durability to back it up. They also utilize VersaTrac® mounting system with vehicle-specific brackets for a fast, secure, no-drill installation.
The distinguishing mark of AdvantEDGE™ side bars is their unique, all-angles design. Instead of the common, rounded look, they are made with 5-1/2" wide, eight-sided tubing.
The angular edges of these octagonal running boards provide a clear-cut accent that better complements the style of today's trucks and provides a solid stepping surface into your vehicle. The boards are also complete with bolted angular end caps for a bold finish.
The unique design of AdvantEDGE™ side bars is further distinguished by an all-aluminum construction. Each running board is built from extruded aluminum alloy. This makes them strong, lightweight and highly impervious to the elements.
The octagonal extrusion supplies the running boards with dependable strength without encumbering your truck with excessive weight. AdvantEDGE™ side bars are also finished with a durable powder coat for maximum resistance to rain, mud, snow, road salt and UV damage.
All-aluminum means all-aluminum, and as such, AdvantEDGE™ side bar truck steps are equipped with stamped aluminum treads. The aluminum step pads are highly resistant to wear, even with heavy foot traffic, and they remain rust-free.
The step pads are finished with a durable textured black powder coat for addition corrosion resistance and added traction. They mount with black chromite-coated hardware, and they are also available in a paintable raw finish option for more customization.
Setting yourself apart is simple with ARIES AdvantEDGE™ side bars. All board lengths are available in two finish options, including carbide black or chrome powder coat. This allows you to complement the look of your truck and customize it however you want.
Both finishes are a highly durable powder coat, providing maximum corrosion protection for the running boards. You get a custom look with the reliability to back it up.
AdvantEDGE™ side bars are also marked for their easy, no-drill, custom-fit installation. They use patented VersaTrac® system. With a set of vehicle-specific brackets for each unique truck, the AdvantEDGE™ boards are able to mount with no drilling or difficult modifications required.
The brackets also accommodate other running boards equipped with the VersaTrac® system. This allows you to customize your truck with different steps, based on your preferences or even the changing seasons.
These unique truck steps are part of a complete series of products that allows you to fully revamp the look of your pickup truck. The AdvantEDGE™ series includes the AdvantEDGE™ bull bar and AdvantEDGE™ headache rack.
AdvantEDGE™ truck accessories all feature the unique pairing of an angular design and all-aluminum construction. The running boards and other accessories are also available in both the carbide black and chrome powder coat finish options.
AscentStep™ running boards by ARIES are designed to give modern pickup trucks and SUVs the accent they deserve. These uncommonly stylish side steps have a sleek teardrop profile, fully blended ends and highly unique, dual-construction step pads.
ARIES AscentSteps™ are constructed from high-strength steel and come with a combination finish for superior elemental resilience. They install with no drilling and no fuss, utilizing innovative VersaTrac® system.
Experience running boards for the modern age with ARIES AscentSteps™. Their unmistakable teardrop design sets the tone for something truly brilliant, rising above the common look of other tubular running boards. The subtle curves and taper of the boards commands attention without the obnoxious attitude of gaudy, outdated truck accessories.
For a final touch of finesse, AscentStep™ running boards have welded end caps that are blended into the boards for a seamlessly contoured look.
Modern style demands modern functionality. AscentStep™ running boards offer a sophisticated alternative, featuring a highly unique polyethylene tread with a stainless steel overlay. The poly provides dependable, non-skid traction when stepping into your truck, and it protrudes through the metal overlay to further complement the board's blended finish.
The stainless steel plate overlays also absorb any scratches, scuffs or other damage from regular foot traffic. The plates easily resist rust, while the steel boards underneath remain well-protected.
Combining the intuition of American engineering with the very best in truck side step technology, AscentSteps™ by ARIES are designed for excellence. Aries construct them using high-strength steel to ensure the utmost rigidity and comfort every time you step up into your truck.
Additionally, the brackets used to mount ARIES AscentStep™ running boards are made from strong carbon steel, making these side steps a worthy extension of your vehicle.
AscentStep™ running boards put rust in its place with their exceptional, dual-layer finish. First, the boards are treated with an E-coat formula, shielding the steel in a rust-resistant skin. Next, a highly durable carbide black powder coat is applied. This finish further enhances resistance to rust and completes the boards with a sleek, seamless look.
AscentSteps™ are equipped for all seasons of the year, easily withstanding exposure to the elements and avoiding rust, chipping and UV damage.
For professional-level installation, AscentStep™ running boards mount using the ARIES VersaTrac® system. This innovative installation system uses vehicle-specific brackets to accommodate various running board options - any running boards or truck steps that are VersaTrac® equipped.
All sets of AscentStep™ running boards are designed for vehicle-specific application for factory-like integration. They mount with no drilling and no difficult vehicle modifications required.
To complete the installation of your AscentStep™ running boards, Aries offer VersaTrac® bracket covers. These simple covers easily bolt into place during the running board installation for a more integrated look on the truck.
The covers also help protect the VersaTrac® brackets, featuring a tough black thermoplastic rubber construction. Installing over the top of the brackets, they add protection against rain, snow and debris for long-lasting rust prevention.
You don't drive a modern SUV because you have to. You do it because it's an experience unlike any other. To complete that experience, you need running boards that specialize in style and longevity.
ARIES AeroTread® SUV running boards are uniquely engineered for both, featuring a dual-construction, a sleek design and a no-drill, no-fuss installation. They provide a dependable step up into your SUV, while complementing its superior style.
First impressions are everything, and AeroTread® running boards don't disappoint. Everything about them - from their curved, contoured trim to their chevron-patterned step pads - is designed to reflect the elevated style of today's SUV.
The vehicle-specific lengths of these SUV running boards and their tapered trim piece allows them to contour to the vehicle's body lines, giving it a subtle but unmistakable touch of urban, aftermarket style.
Fuel economy is extremely important for today's SUVs, and AeroTread® running boards are made to uphold a high level of efficiency. This is accomplished through their unique dual-construction.
The base of AeroTread® SUV running boards is an extruded aluminum core that provides rigid strength and a lightweight fuel-efficient design. The board is then finished with a stainless steel trim piece, providing its sleek style and maintaining excellent corrosion resistance.
To let you accent your sport utility vehicle with a perfectly seamless look, AeroTread® running boards are available in two finish options.
Black running boards feature a carbide black powder coat finish over 201 stainless steel, adding a sleek, integrated look. Polished stainless running boards are made from 304 stainless steel and offer a bright flash of an accent with their mirror-like finish.
For safe, comfortable footing each time you step into your SUV, AeroTread® running boards feature a generous 5" width. The chevron tread pattern provides non-skid traction and extends the full length of the boards to give you a solid step wherever you need it.
AeroTread® SUV running boards also feature a flat tread profile, offering a more comfortable surface for your foot. The treads are made from tough, hardened plastic, ensuring long-lasting wear and UV resistance.
AeroTread® running boards are designed to fully integrate with your SUV, mounting high-and-tight against the rocker panels and promoting a stylish, original equipment feel. As such, each set is equipped with built-in splashguards.
Along the back side of the running boards, the splashguards help close any gap between the vehicle rocker panels and the steps. This allows the running boards to function like a true extension of your SUV and helps shield the steps from rainwater and debris.
Installing aftermarket running boards on your SUV should be a walk in the park. With AeroTread®, it is. They feature a track mounting system with vehicle-specific brackets, allowing the boards to be installed without any drilling required and making it easy to adjust them forward or backward to perfectly suit your vehicle layout.
AeroTread® SUV running boards install with high-strength steel brackets to provide a rigid step, and the brackets are covered in a powder coat finish for long-lasting rust resistance.
Whether you're building the ultimate custom ride or just need some added functionality, ARIES 4" oval side bars offer elevated style and safe, comfortable footing for your truck or SUV. Their sleek, elliptical design and vehicle-specific contours complement the look of your vehicle, while the raised step pads provide excellent traction, even in wet conditions.
ARIES 4" oval side bars are available in two finish options, and each set installs with no drilling required. They also offer 4" oval wheel-to-wheel steps for enhanced functionality on your pickup truck.
No other side bars or nerf bars on the market match the elevated style of ARIES 4" oval side bars. Instead of plastic end caps, these truck side bars have a blended design. The end caps are welded into place and are seamlessly integrated with the elliptical tubes to create a truly elegant look.
ARIES 4" oval side bars also have unique 20° bends on the ends, contouring to the body of the vehicle for a subtle, sleek finishing touch.
Note: Certain models have straight ends to better complement the vehicle's design.
ARIES 4" oval side bars are not only engineered for adding a sleek look to your truck or SUV. They also offer safe, comfortable footing. The step pads of these stylish side bars are raised off the tubes, providing a full 4" width and a completely flat surface for comfortable entry and exit.
The tough poly step pads are also equipped with a non-skid treads, offering enhanced traction, rain or shine. Each step pad is custom-positioned to match the door layout of your vehicle, placing a safe, convenient step right where you need it.
ARIES 4" oval side bars are available in a wheel-to-wheel option for select pickup truck models. Wheel-to-wheel steps provide an additional step pad toward the rear of the side bars, giving you a convenient, non-skid step for better access to the truck bed.
4" oval wheel-to-wheel steps are ideal for reaching into the truck bed for cargo, a truck tool box or a 5th wheel hitch. Aries offer them for select applications, including some regular cab pickup trucks.
Perfectly integrating with your truck or SUV, every set of ARIES 4" oval side bars is made vehicle-specific. Furthermore, offer two durable finish options to let you select the look that best works for your truck's existing style.
Stainless steel side bars are made from highly rust-resistant 304 stainless steel. They're designed to withstand the elements, season after season, and they come with a mirror-like polished finish for an eye-catching shine.
Black steel side bars are constructed from carbon steel, and they provide a high-strength option. They’re covered in a semi-gloss black powder coat finish for maximum corrosion resistance.
For solid strength and rigidity, ARIES 4" oval side bars are constructed with heavy-wall tubing. This includes both steel side bars and stainless steel side bars.
The oval tubes are shaped with a strong, sleek elliptical profile and are finished off with the signature 20° bends and blended end caps. The welded end caps offer the additional benefit of completely sealing off the interior of the tubes from moisture and other corrosive elements.
A truly seamless, integrated, OE look would not be possible without a vehicle-specific design. That is why each ARIES 4" oval side bar is made for a unique truck or SUV application. The side bars and brackets attach using pre-existing mounting points on the vehicle, completely eliminating the need for drilling in the installation.
ARIES 4" oval side bars mount with heavy-duty steel brackets for a rigid step up, and the brackets are shielded in a durable black powder coat finish for long-lasting corrosion resistance.
For some trucks and Jeeps, getting that oversized look is essential for good customization. The larger the vehicle and the higher off the ground it stands, the better.
For such custom builds, ARIES Big Step™ 4" round side bars offer big, bold attitude, featuring an extra-large 4" diameter tube profile, raised step pads and vehicle-specific contours. They also feature an offroad-ready, powder-coated aluminum construction. Like all ARIES nerf bars and running boards, Big Steps™ install with no drilling required.
Big Step™ side bars are not only designed to accent offroad tires, but they also have the solid construction to back up the offroad ride. These black nerf bars are made from hardened T6 aluminum alloy. The extruded aluminum tubing is strong and rigid enough to provide a dependable step, but it also offers the unique advantages of aluminum.
Big Steps™ are lightweight and highly corrosion-resistant. They provide style and convenient entry and exit without the cumbersome weight of steel. They also easily outlast rust in spite of mud, dirt, road salt and the elements.
While an aluminum construction provides these nerf bars with a rust-resistant foundation, a unique finish optimizes them for any outdoor adventure. Big Step™ side bars are finished in a textured black powder coat. This shields the aluminum bars against the elements, maximizing durability and longevity.
The unique textured finish also provides a level of hide on the side bars, blending out minor scuffs, scratches and grime accumulated on the trail.
To complement their bold tube profile, Big Step™ side bars feature raised step pads. The pads provide a wide, flat, comfortable stepping surface into the vehicle, and the surface is textured for enhanced traction and safety.
Big Step™ side bar step pads are constructed from tough polypropylene to endure wear from frequent foot traffic and UV damage from sun exposure.
Each and every set of Big Step™ 4" side bars is made vehicle-specific to perfectly integrate with a unique truck or Jeep application. A vehicle-specific design means the tube lengths, bends, placement of the step pads and orientation of the mounting brackets are all customized for optimal fit.
Big Step™ side bars are constructed with mandrel-bent aluminum tubing for a sleek contour to the body of the vehicle, giving you the functionality of original equipment with the bold look and style of aftermarket nerf bars.
With their vehicle-specific design, Big Step™ side bars are also incredibly easy to install. Because each set has vehicle-specific bends and mounting points, the brackets are able to install quickly with no drilling or tedious vehicle modifications required.
The brackets are constructed from heavy-duty, high-strength steel for a rigid step, and the nerf bars come with all necessary hardware for a complete install from start to finish.
Big Step™ side bars are meant to go it alone. The ARIES Big Horn™ bull bar provides the perfect complement, featuring the same bold 4" diameter tubing, lightweight aluminum construction and durable, textured black powder coat finish as their nerf bar counterpart.
Together, these two truck accessories truly give your truck or Jeep a complete attitude check and that aggressive, aftermarket style you're after.
There are countless running boards out there, as well as many different products designed to protect your vehicle's rocker panels. For the perfect combination of both, ARIES Rocker Steps provide a convenient step up into your offroad truck or Jeep, as well as extra rocker panel protection.
ARIES Rocker Steps feature a high-strength, fully welded construction of carbon steel, as well as a durable black finish that is uniquely specialized to face the outdoor elements. All Rocker Steps install with no drilling required and are available for pickup trucks and the Jeep Wrangler.
On the trail, rocks, branches and other debris can quickly damage your vehicle's rocker panels if they are not properly protected. ARIES Rocker Steps provide extra protection for the sides of your truck or Jeep, while simultaneously offering a fully functional 3" wide stepping surface.
Rocker Steps are a superior choice over most rocker panel protectors because of their integrated stepping surface. They are also better suited for the trail than most running boards because of their enhanced, all-steel strength.
ARIES Rocker Steps not only provide a solid step up into your truck or Jeep, but they also feature a flat profile that ensures plenty of ground clearance. This essential for any offroad ride.
While many side steps and running boards mount low on the vehicle, Rocker Steps are designed to mount high-and-tight against the rocker panels, keeping them elevated above potential threats.
For extra protection for the sides of the vehicle and a solid step up, ARIES Rocker Steps are constructed from high-strength carbon steel. Not only that, but they are complete devoid of plastic parts.
These rocker guard side steps feature a strong, double-tube layout with a 3" wide welded top plate and welded end caps. While Rocker Steps are not intended to completely replace the functionality of rocker guards or rocker bars, they do add an extra barrier to help prevent damage to the vehicle's sides.
To add even more strength and make installation quick and simple, ARIES Rocker Steps come with pre-welded, vehicle-specific mounting brackets.
Welded to the running board itself - as opposed to being bolted on - the brackets provide the Rocker Steps with greatly enhanced strength and rigid. You not only get a solid step up into your offroad truck or Jeep, but the steel side steps are able to better stand up to obstacles and offroad debris.
The installation process is streamlined by using pre-existing mounting locations on the vehicle. Each set of Rocker Steps is designed to fit a specific vehicle application, eliminating the need for drilling and cutting down on installation time.
A vehicle-specific install also ensures a custom fit without the hassle of custom modifications, and it boosts the strength of the Rocker Steps even more. Each set comes with all necessary mounting hardware for a complete installation.
To enable Rocker Steps to withstand the rigors of the outdoor elements and offroad trail, they are finished with a unique, dual powder coat finish. First, an E-coat is applied to shield the carbon steel with a rust-resistant layer. Then, a highly durable textured black powder coat is applied for superior rust, chip and UV resistance.
This textured powder coat also provides the unique advantage of helping to hide minor scratches, scuffs and dirt accumulated on the trail, keeping your truck or Jeep looking clean like a pro.
ARIES 3" round side bars equip your vehicle with a dependable, non-skid step. Whether you're taking your Jeep Wrangler offroad or just cruising the town in your lifted truck, these nerf bars are designed vehicle-specific, giving you customized footing without the headache of a custom install.
They offer hundreds of applications for 3" side bars, including a number of older trucks, and offer three finish options, allowing you to select the look that best suits your vehicle.
To give your truck, Jeep or SUV the accent it deserves, all ARIES 3" round side bars have a unique contour. They don't do a one-size-fits-all. The tubes are configured and bent to complement each vehicle, accenting its body lines for a truly integrated and original equipment look.
The tubes of ARIES 3" side bars are also mandrel-bent. The bends seamlessly contour to the vehicle for a more professionally customized look.
ARIES 3" round side bars aren't just for popular pickup truck brands. They offer literally hundreds of applications to give you a custom fit and easier entry and exit from your truck, Jeep, SUV or crossover.
ARIES 3" side bars are available for the very latest truck applications as well as many older vehicles, such as the Ford Bronco, older F150 pickup, Chevy and GMC C- and K-series, Mazda B-series trucks and many more.
More than just a shiny accent, ARIES 3" round side bars offer reliable non-skid footing when climbing into your vehicle. They feature tough polypropylene step pads with a textured surface to promote better traction even in wet conditions.
The step pads of each set of 3" side bars are custom-positioned, matching the door layout of the vehicle and placing a non-skid step exactly where you need it every time.
All ARIES 3" side bars are constructed with 3" diameter, heavy-wall tubing. This provides a strong, rigid step up into your vehicle and offers a sleek, aftermarket look to accent your ride.
To accommodate your own specific tastes and the requirements of your specific truck, Jeep or SUV, ARIES 3" side bars are available in three finish options.
ARIES polished stainless steel side bars are constructed from 304 stainless steel - a high-nickel stainless that offers superior rust resistance. They are polished to a mirror-like shine for an unmistakable accent.
ARIES black stainless steel side bars are made with 201 stainless steel and are finished with a semi-gloss black powder coat. The unique pairing of powder coat over stainless steel offers a highly non-corrosive black finish option.
ARIES black steel side bars provide a high-strength option, being constructed from carbon steel and finished with a durable semi-gloss black powder coat.
Installing ARIES 3" round side bars couldn't be easier. Whether you're customizing an offroad-style Jeep or just adding functional footing to your pickup truck, ARIES 3" side bars offer a no-drill, hassle-free installation.
The mounting brackets for the side bars use pre-existing mounting points. They quickly and securely bolt into place, integrating with the factory design of vehicle.
Aries® Automotive has been providing high quality aftermarket products with reliable service since 1997. The company has experienced steady growth year after year, with more and more enthusiasts discovering and appreciating its designs in tubular steel, rubber, and ABS plastic products. To meet the needs of the ever growing number of customers, Aries Automotive has increased their customer support by providing operations throughout North America: Southern California, Mid Texas, Colorado, Georgia, Indiana, Pennsylvania, British Columbia & Ontario, Canada. This has enabled Aries Automotive to meet the increasing demands for its products and allow for on-time-delivery at competitive prices.