Door Panel Inserts

If you have an 05-09 Mustang with door panel fabric falling off look no further, this is a permanent fix for a great price. I watched no less than 30 YouTube videos on peoples idea's on how to repair these panels and I didn't see anything that impressed me until I found these. I did watch a couple guys install these and said the fit was ok and some said the glue wouldn't stick. Here is the key to these fitting perfect and sticking very well. You have to remove the loose vinyl but also the backing material that is stuck very well to the actual door panel. It's is a bit of work and I found a heat gun helped get this off but once that was removed an I was down the the plastic of the door panel these things almost snap in place. It will take some time and I can't stress enough to take the time and clean any of the old glue or fabric off. I used a razor blade and sand paper. The only way to get the perfect results I got is to remove the door panel and once you apply the glue and panel put weights on it to make sure it's laying flat everywhere and let dry for 24 hours. You will not be disappointed and the glue held very well. I will say you will need another tube of glue they really should give you two tubes with these. I purchased another tube before doing the second door and good thing I did cause I only got half glued before running out. I clean my panels pretty much spotless before putting these on and I still only had about 3 hours per panel. Good luck these are a great fix in my opinion.