Product Details
Universal Trigger™ RF and Bluetooth Solid State Relay System by AAC®. What the world needs is a safer more efficient solution. Each TRIGGER module can connect up to four separate accessories via discrete, fused, solid state relays through a single 12 Volt input. The Trigger System substantially saves installation time. It eliminates the need to run wires under the dash or through the firewall of a vehicle when wiring accessories. It also adds functionality such as; a remote control for activating installed accessories from outside the vehicle, dimming and flashing functions for installed lighting, fused circuits with LED indicators to notify of blown fuses - and more. Made with the expertise to last and perform, this superior product by AAC will elevate your driving experience to a new level. It provides outstanding reliability, snug fit, and excellent finish. Featuring American quality and ingenious design, this product will succeed your expectations. On top of that, it is offered at a competitive cost that suits your budget.
Notes
- Running wires to connect a new electrical accessory is a time consuming project and, if done without the proper tools and experience, potentially disastrous
- For use with Trigger™ RF and Bluetooth Solid State Relay System
Fitment notes
- Also Fits Can-Am, Kawasaki, Polaris Ranger, Polaris RZR, Yamaha and UTV's
Includes
- 4 x 8' wire harnesses with the mating connector to the control box on one end and blank wires on the other
- 2 x 12 gauge
- 2 x 14 gauge
- Harnesses include vinyl shroud
Features
- 4 channel. 2 x 30 amp relays, 2 x 10 amp relays, All Solid State, 12-24 volt
- Battery powered RF Remote with universal mount system
- Bluetooth control from phone/tablet app
- Manual buttons for on/off on top of case
- 12 volt input, 3 wires, ground, switched positive, battery positive
- 12 volt out with waterproof connectors
- Fuse's built in, waterproof cover (30 amp - 1 and 2, 10 amp - 3 and 4)
- LED's to indicate relay on and if fuse is blown
- Waterproof case design, withstands temps to 250°F
- Waterproof connectors included on both the control box and the harneses
- RF connection to control box
- Replaceable battery power
- Back lit with press of button, delayed off for the back light. Press button, lights come on and stay for 5 seconds then dim and shut off to conserve battery life
- Apps for both Android and IOS with simple interface for turning on and off the 4 channels. User selectable up to 4 buttons
- App stays on when in use as long as plugged into power. If not plugged in goes to stand by
- App allows for dimming and strobe functions in addition to ON/OFF
- Painstakingly designed to match your security needs
- Made with extreme attention to detail
- Made with the use of the latest technologies
The RF remote utilizes a universal mounting system that will accommodate round surfaces and flat surfaces and is battery powered to simplify wiring further. Its buttons are backlit and it is programmable for security or use with additional remote's. Several Trigger control boxes and remote's can be used together to control up to 24 accessories. When mounted to the roll bar of a UTV, the buttons on the remote are much more easily accessible than the dash switches. No straining against the seatbelt to reach the dash, just a quick reach up and the remote is right at hand. The Bluetooth App will control on/off and dimming functions as well as flashing when used with LED or conventional lighting. It is simple to set up and allows for user customization. Use the app to "Trigger" lights on from outside the vehicle when camping, or for whatever you might need to activate on demand. Save time, simplify your installs, and get out on the trail: Pull The Trigger.
RF remote assembly with magnetic mounting function (rare earth). Magnet on underside of main switch assembly attaches to steel plate on main mount. Mounting base allows for attachment to vehicle with screws and "Zip Ties".
Buttons have a "Back-light" function. Circuit board box would have clear molded top and clear silicone switch seals with 2 LED's mounted on the board. When buttons first pushed, light comes on for 5 seconds and then dims off.
Designed with two batteries to extend the life of the RF remote, good for up to 5 years without replacement.
Control Wired Accessories Using an Industry First RF Remote.Included with every TRIGGER Wireless Accessory Controller, the RF Remote Assembly features a sturdy mounting base and detachable back-lit switch assembly. Switch location is no longer dictated by existing dash mounted switch panels; the TRIGGER RF Remote Universal Mount System allows for flexible mounting locations throughout the vehicle for ultimate convenience of driver and passenger. The remote can remain attached to it's mounting base with strong neodymium magnets, or detach it and control accessories from up to 40 feet away.
To access more advanced control options, download and install the free mobile app for iOS and Android devices and connect to your TRIGGER system wirelessly using Bluetooth technology.
The group of individuals that formed Advanced Accessory Concepts® have a combined 50+ years' experience in the design, development and cost effective manufacturing of unique accessory components. AAC goal? To improve and enhance your personal experience and overall vehicle performance. AAC are enthusiasts and it shows in AAC work. Across all brands AAC strive to offer products that perform beyond consumer expectation in both fit and finish, resulting in higher quality accessories and focused customer service.